Question about Cars & Trucks

Open Question

Sqeeking vbearing - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mustang breaks sqeeking


Depending on what type of pads you are using and/or how old the brakes are it can be several different things. If your brakes are worn out...it could be the squeeler touching the rotor. If not if could be that your using a semi metalic pad which can cause sqeeking. Or it could be that your rotors are glazed over from overheating. If this is the case they may need to be "turned" by your local shop

Jan 30, 2013 | Cars & Trucks

1 Answer

On 2000 dodge durango alot of sqeeking on fron t drivers side when you drive


Check your suspension including lower A frame where it attaches to the wheel. Does it squeek more at low speed?

Sep 07, 2012 | Dodge Durango Cars & Trucks

1 Answer

2002 gmc truck water pump making noise how to stop noise


Gday mate, geoff here, could be the belt mate, try a bit wd40 / rp7 / crc, on the belt just a quick squirt or rub some soap on the V of the belt ,if noise persists could be the pump itself worn, does it have any lateral or dynamic play when wiggled, while engine off of course, hope this helps , geoff.

Feb 11, 2012 | GMC Sierra 1500 Cars & Trucks

1 Answer

2007 jeep compass 4x4 brakes sqeek when backing up especially. Replaced pads, rotors and rear calipers still sqeek


take your pads back off take the backing plate off load a bunch of anti sqeek between the pad and plate then the plate and caliper should solve your problem unless its your coposition off your pads some grades of semi metallic pads just sqeek.

Nov 23, 2009 | 2007 Jeep Compass Limited

1 Answer

Sqeeking noise.


sounds like u need a new belt may be dry rotted or just worn but also look at your belt pullies

Jul 12, 2009 | 2000 Nissan Pathfinder

1 Answer

Channged waterpump now sqeeks at belt pully


check the pulley bearing if it's an older belt try cleaing the **** out of it
usualy serp belts collect small particles and lodge them in the grooves it will squeek if **** in groves

Jun 29, 2009 | 2004 Mazda Tribute

1 Answer

Makes a sqeeking noise while turning or on bumps


Suspension problem like a rubber bushing. Try recreating it, have some one push up and down on the front fenders one at a time, asuming the noise comes from the front. Try and spot where is coming from, if the part looks good spray it with lubricant not penetrating oil. Is best to replace what ever is making the noise.

May 11, 2009 | 2006 Chevrolet Equinox

1 Answer

My 2005 Honda Accord V6 Coupe front end sqeeks loudly.


The only other thing really around to squeek would be the control arm bushings. The start and stop portion may mean you should look into the engine/transmission mounts.

Apr 21, 2009 | 2005 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...