Question about Cars & Trucks

Open Question

150 mariner 5671907,starts ok and run for about 5min then stallss and go of

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine starts nicely for about 5min after that later engine shutsdown.


run the fault codes to see which sensor fails when it get hot
could be a faulty ECM
could be a faulty ignition control module
could be a coil/s
it appears that when an electronic component gets hot the unit fails

Sep 03, 2015 | Cars & Trucks

1 Answer

Starts and dies


CHECK FUEL SUPPLY FOR RESTRICTIONS
TANK SUPPLY VALVE MAY BE CLOGGED
CHECK THAT LINES ARE ON CORRECTLY

Dec 27, 2013 | Cars & Trucks

1 Answer

Car wouldn't start. Thought it was a battery. Got a jump and went to mechanic. Mechanic said battery was fine but terminals very gunked up. Cleaned terminals and sent us on our way. Car...


did they run a test on the alternator!! at battery when off should be at least 12.6 volts, less than 12 volts battery is bad. when running at battery voltage should be at least 14.1 to 14.7, thats if alternator is ok. if less than above replace alternator. if alt. is ok, could be a bad battery.

Jun 16, 2011 | 2005 Mercury Mariner

1 Answer

My 2008 Mariner battery is going dead periodically...the light on the battery looks red after running awhile it looks greeen & red. Is this the battery or the alternator


if you have 12.5 volts at the battery, the battery should be ok. If it reads 14.5 volts when the engine is running, the alternotor should be ok.

Dec 26, 2010 | 2005 Mercury Mariner

1 Answer

My 2003 nissan sentra will start up ok not great but it starts and it will drive for a few miles then just die i had it running for about 5min not driving just running and it died out of no where


i have the same problem and my mechanic told me that it was the camshaft position sensor wire plug and sensor but its still the same, let me know if you find out what it is

Jun 27, 2010 | 2003 Nissan Sentra

1 Answer

1984 F-150 none of the gauges work temp, volts


I would check with a Haynes (or equiv) manual. Probable fuse link from battery is out, a wire-type fuse "link". Check the fuse block, is there 12 volts coming in with key ign on? Does the truck start and run? Ignition switch is ok?

Aug 07, 2009 | 1984 Ford F 150

2 Answers

4X4 BROKE


Auto Dr -- By autolock sol.. do you mean the Vac. valve on the firewall Loc at pass side top . aprox $24.00 @ ford Check TSB for intermitent hub enguagement. ( Driving and Loud grinding noise coming from under veh) then stops as fast as it started.2-10mm bolts and 5min time this is A known prob w/F150's 4x4

Jan 23, 2009 | 2005 Ford F-150

1 Answer

Car run good for the first 5min, then its want to cut off


electronic lockup torque converter is bad had the same problem unless its very nice car cheaper to buy a new car

Jan 18, 2009 | 1988 Buick Reatta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...