Question about Mitsubishi Colt

1 Answer

I have a badly damaged front break disk on a Colt Clubcab 4x4 2.8TDi 2008 model.

Having looked at it, it would appear that one needs a special tool to remove the 4x4 hub. Without the special tool it would appear the front face of the hub needs to come off. If this is taken off, I am worried about what is behind this being the auto changing model. Can anyone assist with a workshop manual or advise. Steve

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 1,835 Answers

I tried to repair mine and it cost me more as I had to get a tow in and have my mechanic repair it. if you don't know what you are doing don't touch it. I could repair the older cars but not now.

Posted on Jan 03, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I require any special tools to replace the driver's side rear reflector on the bumper of a 2008 Hyundai Vera Cruz. It appears to snap in, but I don't want to break it. Thanks.


There's nothing in the manuals about special tools. I have the same problem. I think you'll have to remove the lower bumper in order to get good access to it. It appears that there is a black housing screwed into the bumper from the rear side and the lens would snap into that.

Apr 23, 2015 | 2008 Hyundai Veracruz

1 Answer

After how many km to replace injectors on colt clubcab 2007


no set time , distance , have the spray pattern tested and if ok leave them in

Apr 30, 2014 | 2007 Mitsubishi Colt 2000

1 Answer

2007 colt clubcab, does it have a fuel warning light


Yes. An amber light comes on in case you are left with approximately 5 liters of fuel in the tank.

Apr 30, 2014 | 2007 Mitsubishi Colt 2000

1 Answer

Remove stereo colt 2009


Although a special tool is used to pull Colt Original Stereo but you can use two flat metal strips which can easily slip into the slots (without damaging the front cover/face) easily visible on both sides of the stereo (CD Player) but they should be at least four inches long. Think nail metal foiler may be an option.

Apr 24, 2014 | 2007 Mitsubishi Colt 2000

2 Answers

How to replace the front driver shock in my toyota rayis 2008 and if i need a special tool. thanks


You're better off having someone doing it for you (trust me) It's a strut assembly, it can be dangerous for a DIYer at home. It requires quite a few specialized and expensive tools like impact tools and a spring compressor to start with. Have a shop do it for you for the peace of mind and the safety & warranty factors.

Mar 10, 2011 | 2007 Toyota Yaris

1 Answer

I have a 1991 Dodge Colt Vista and i am having problems with the Break Master cylinder and i am not finding a replacement part online because they are not looking like the same piece. so im looking for a...


The Colt was built by Mitsubishi for Dodge. I would recomend you go to your local parts store and have them order what you need if they done have. It will save you time and agrivation.Good Luck.

Jan 09, 2011 | 1991 Dodge Colt

3 Answers

Compressing the rear disc brake caliper on 2008 grand caravan


The rear calipers on these models require a special tool that compresses and turns the piston in at the same time -- most parts stores carry this tool.

It is called a caliper piston press -- and it installs where the pads would go and acts like a c-clamp,when turning handle it will turn the caliper piston backinto the caliper as it compresses it.
Anytime the brake rotor or brake pads are being replaced, the rear caliper piston must be seated (bottomed) to compensate for the new brake rotor or lining. Because the Parking Brake self-adjuster mechanism is attached to the piston, a special seating method is required. The only acceptable method is by rotating the piston back into the bore using Retractor,MILLER Special Tool 8807, . Any other seating method will damage the self-adjuster mechanism.
Good luck and hope this helps.

Mar 07, 2010 | Dodge Caravan Cars & Trucks

2 Answers

Compress FRONT Caliper on 2008 Town Country


You can compress the piston with a simple C-clamp. other than youre basic tools you will be okay nothing special required.

Dec 17, 2009 | 2008 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...