Question about Ford Cars & Trucks

Open Question

I'm building a ford 4100 and don't know what the head needs to be touqred down to can anyone help me ?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2000 ford taurus wont start it just chirps wheb i try to turn it over

check the head lights by turning them on if they don`t light up or there dim it`s a dead or low battery, replace battery or try to wiggle the battery cables one could be loose or have corossion build up that would prevent contact with battery if this resolves the problem have the alternater checked to make sure it`s delivering the correct voltage. hope this helps

Feb 01, 2013 | 2000 Ford Taurus

1 Answer

I have a 1998 Ford Expedition, and the licence plate lights don't work. I've replaced the bulbs. I don't have an owners manual so don't know which relay switch to change. Can anyone help?...

Hi, there is no relay, and the plate light run off the same fuse as the tail lights. The problem must be in the wiring or sockets in the back of the truck.


Jul 04, 2011 | Ford Expedition Cars & Trucks

1 Answer

I need to know the length of the drive shaft in a 1993 ford e-150 van

suggest you go to scrapyard and measure one ,unless you remove your own one and measure it as i doubt if anyone knows this or has access to the original build specs

Jun 12, 2010 | 1993 Ford Econoline

1 Answer

I was driving down freeway when my 98 ford zx2 backfired and died, it felt like i was out of gas but i wasnt. It turns over but i dont think im getting any fire. There was a strong emission smell present....

Clean all the corrosion from the battery, take some spare wire and any crimp on ends you can get, splice all the bad wiring back together. Cut the wires till you get to good clean copper. 

Apr 04, 2010 | 2002 Ford ZX2

2 Answers

1999 f250 super duty building pressure in degas

check ur oil if color of grayish chocolate milk and or white smoke from tailpipe pretty sure signs of blown head gasket

Oct 14, 2009 | 1999 Ford F250 Regular Cab

1 Answer

Trouble starting a Ford Windstar 2000

sounds like the timing belt is off.

Dec 30, 2017 | 2000 Ford Windstar

1 Answer

E7 heads crane 44308 springs installed car does not run right

What exactly is it doing?? I build these engines alot. Why exactly did you upgrade springs? Did you replace the cam or anything. I need to know why and what you did in order to help you with your problem. Email me at

Jul 21, 2008 | Ford Mustang Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5651 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides