Question about Cars & Trucks

Open Question

How do i fix the kaleidoscope light in a olaf air blown

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda mpv airbag light code 16


possibly the indicator bulb on the dash - at the air bag - is blown - or the seat sensor has failed. best be prepared to pay 150 buchs and have the dealer screw you for the fix.

Mar 29, 2014 | 2004 Mazda MPV

1 Answer

2002 pontiac montana air bag lights on


2 simple fixes for airbag light are a poor connection under either front seat, or a blown fuse.

Oct 30, 2013 | 2002 Pontiac Montana

1 Answer

The lights an radio an wipers, horn,nothing want work on a 1995 j30 infiniti


Check your fuse box. When multiple things fail at the same time it is usually a blown fuse. Extremely easy and cheap to fix. Probably a dash fuse, on a 95 infinity the fuses should be easy to identify by looking at the referance guide on the back of the fuse box cover. If it doesnt have a reference guide you can check your fuses one by one, You can identify a blown fuse by inspecting the contacts for a damage. If you find a blown fuse be sure and replace it with the same type.

Jun 29, 2012 | Infiniti Cars & Trucks

2 Answers

The lights in the switches like power window,door lock,air cond.,heater,etc. have went out. how do you fix?


Hi,
Seems your FUSE for interior lights poped!
Look for the fuse box under the dash, look at the bottom of the cover, there is a fuse, amperage, and for wut purpose.
Replace the blown fuse with new one, check if the fuse link is still okay, blown fuse link is disconnected if u see it physically!

Jun 16, 2011 | 2002 Chevrolet Silverado

1 Answer

How long is it going to take for the passport to be issued once the application is submitted?


british passport ?? not long maybe a fortnight but it should be that only a passport is issued if your great grandfather fought on the somme and could trace his ancestors back to william the conquerer or olaf the viking .

Dec 13, 2010 | Toyota Corolla Cars & Trucks

1 Answer

Instrument panel lights not working. cigar lighter illumination not working. air control illumination not working left hand side lights not working.


It is most probably that the bulb inside which illuminates the panel is blown.It is a big job to get to but simple to fix.Hope this helps.

Feb 13, 2010 | Renault Le Car Cars & Trucks

3 Answers

A code read at the odometer NO BUS - My oil light and engine light came on. My gas, speed and RPM hands do not work. My air bag light stays on as well. i do have head lights but the light will not come on...


Locate the fuse in the fuse box the =Bus fuse may be blown, if the fuse is not blown then the voltage regulator on the back of the instrument panel has gone bad and you will have to pull the cluster out to fix it.

Jan 27, 2010 | 2004 Jeep Liberty

1 Answer

I have a 2000 jeep cherokee that i bought that had both air bags blown the truck hit a ditch but has no body damage i replaced both air bags but now when you turn on the ignition the air bag light comes...


Something is wrong with the SRS. This is not a DIY repair. Take it to a professional for repair. They will reset the light after repairing it. Otherwise the air bag may not deploy in an accident or may deploy at any moment. Don't take the risk. Get this fixed

Jun 13, 2009 | Jeep Cherokee Cars & Trucks

1 Answer

Airbag light is on


My air bag light came on in the dash on day just driving. Knew it wasn't accident related. What the problem was the switch to turn off the pass. side air bag off and on with your key. the bulb had blown, this made the light in the dash come on. Junkyard got switch replaced it. fixed my problem hope this helps.

May 02, 2009 | 1998 Ford Ranger SuperCab

2 Answers

Check engine light comes on


Do you hear the air pump run when you start the car? No? Check the A.I.R. pump fuse in the under hood fusebox. if it is blown then you probably need a new air pump motor. If the fuse is not blown then the relay could be the culprit. if you can hear the pump running when you start it the engine then you probably just have some wiring issues from the relay to the ecm it can still work ok but fail the resistance test that the computer runs randomly. Give some more info and I'll help you through this.
Good luck.
Please rate this response , and let me know if ya need more help!

Aug 31, 2008 | 1999 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...