Question about Cars & Trucks

Open Question

I have a niskiki bushwhacker with these numbers on pedel GJO 0567 and need new bearnings on the main sprocket. can you help

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install bearn for 2002 kia sedona yes


GO TO SEARS N ROEBUCK AUTO ALIGNMENT CHECK IS FREE THEY WILL TELL YOU WHAT PARTS TAKES 30 - 45 MIN.

Sep 17, 2012 | 2002 Kia Spectra

1 Answer

P0741


Hello,

It is most definitely a transmission code.

P0741 = Torque Converter Clutch Circuit Performance or Stuck Off

If there is a whine/whirring sound, it may be due to drive sprocket support bearing fluting and/or bearing failure.

Replace the drive sprocket support bearing. Inspect the channel plate and drive sprocket for any abnormal wear, Turbine shaft for cut seals and/or nicks, and chain for excessive play due to failed bearings.

Important:
When installing the new bearing, the part number MUST be visible (facing upward). Before installing the drive sprocket, lubricate the bearing assembly with J 36850 assembly lubricant.

Service Parts Information
Part Number = 24214158
Description = Drive Sprocket Support Bearing


I hope this helps!

Mike

Dec 15, 2011 | 1999 Oldsmobile Silhouette

2 Answers

I need to know the sincronization on a time chain for a nissan mazima 97, engine 3.0


The camshaft inner chains have gold links on them to line up with the mating marks on the camshaft inner sprockets.
The Main Drive Chain has two blue links that line up on the camshaft outer sprocket mating marks and a gold link that lines up with the mating mark on the crankshaft sprocket.

Jan 05, 2011 | 1997 Nissan Maxima

1 Answer

When i push the accel. pedel to it takes a about


check the adjustment on your accel cable...

Apr 05, 2010 | 2006 Toyota Land Cruiser

1 Answer

How many chain links from camshaft sprocket mark to crankshaft sprocket mark on a 4G54


Click on the following free Link. It has the Timing Belt/Mark Diagrams you will need for your 1989 Mitsubishi Sigma.
You can count the number of notches on the Belt giving you the number of chain links between the Front and/or Rear Camshaft Marks to the Crankshaft Sprocket.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1989/make/mitsubishi/model/sigma/1989_mitsubishi_sigma_timing_belt_diagram_marks.htm

Mar 09, 2010 | 1989 Mitsubishi Sigma

1 Answer

Manual for 1989 Toyota MR2 and Idle problem.


gjo to alldata.com you will love it...
sawdust46

Jul 03, 2009 | 1989 Toyota MR2

2 Answers

Chirping or squeal when idling


it could be a few thing.it may be your belt/pully /or alternater. it sound like it the bearn in the alter. try spaying p b blaster on the bearns. when the nose stop . that were the prolbems is.

Mar 22, 2009 | 1999 Ford Explorer

1 Answer

2004 Jeep Wranler turn signal issue


load variation may not be proper causing that condition. Any chance you can use original lights?

Mar 19, 2009 | 2004 Jeep Wrangler

1 Answer

Removal of wheel bearning


If you are just pulling the hub, then all you need is a 19mm to take the wheel off, an 18mm for the ball joint nut, 18mm socket and rachet for the tie rod end, I believe a 21mm socket for the strut bolts, then a 14mm and a 18mm for the brake caliper and bracket.

If you plan to press it out yourself you'll need a set of C-clip pliers and a press.

You'll need a breaker bar and 30mm socket for the drive shaft

Dec 07, 2008 | 2000 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...