How to disconnect immobilliser on a land rover discovery 2001
Engine immobiliser must be disabled by a Rover TedtBook. Most likely only your local dealer will be so equipped. There are ways to work around or through thus common isssue. Be sure youve done the following before dropping the bucks at the dealer:
Replace batteries in your remote
Resync remote (instructions in your owners manual)
Try resetting the alarm ECM by disconnecting negative battery cable, turn ignition to second position, leave drivers door open, then reattach your negative lead, shut the hood, get in the drivers seat, turn off the ignition then attempt starting. Hoid and drivers door must be shut when you attempt to turn it over.
Last but not least therd is the EKA procedure. Step by step instructiona available on this and many other sites. Google "EKA procedure" adding your model and year in the search box.
Good luck. Feel free to message me directly if you are unable to find the instructions.
Jul 12, 2014 |
2001 Land Rover Discovery Series II