Question about Isuzu Cars & Trucks

Open Question

WHERE DO I FIND THE CAM POSITION SENSOR, HOW DO I REMOVE AND REPLACEMENT THE CAM POSITION SENSOR ON A 1998 ISUZU AMIGO 4X4? WHAT IS AVERAGE COST OF THIS SENSOR?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the CAM Position Sensor found on a 1998 Isuzu AMIGO 4X4, 4 cyc


Look along the engine about where the camshaft would be. I should have electrical connector and a bolt that holds it into the head.

Jan 02, 2017 | Isuzu Cars & Trucks

1 Answer

98 isuzu amigo 2.2L 5sp 2wd new NGK plugs & wires, fuel assembly, rail test, code -cam pos sensor?? still bucks, lurches, can't get 2 4,000 rpm 2 reset pcm, WTF?? 120,000 odo. Help us pls sir.


2.2L gas 2.2-liter petrol (X22SE)
or 2.2L
2.2L (X22se/D) Engine???
there are 3 engines

i cant guess engines yet, "Carnac the mag." is off line.
all i can tell from above is engine misfires.
when did it last run ok,, last week , last year, or found car in a barn.
history matters.
why not connect any $10 to $100 scan tool and scan it
running,,, it will infact ,tell you things, errors,called, DTC errors.
and is key to any diagnose of any modern engine in USA>.
even in canada the tool works starting in 1998.

is cam belt fresh? and timed correctly?
AMIGO, 2.2L (1 of 3)

first learn what under the hood.

please post what 2.2L is there. and fuel type.
gas, diesel ,petrol, ect

Mar 15, 2016 | 1998 Isuzu Amigo

1 Answer

Oxygen sensor on a 1998 isuzu amigo


what is the question? non stated,
where is it
where to buy it
what does it do
how to.
when do
how to...
questions

Jan 27, 2016 | 1998 Isuzu Amigo

1 Answer

Coolant temp sensor location on 1998 Isuzu Amigo 2.2L 4X4.


Go in on utube and ask the question Where is the 1998 Isuzu amigo coolant temp sensor located good luck

Oct 22, 2014 | 1998 Isuzu Amigo

1 Answer

1998 isuzu amigo 4x4 3" lift front suspension problems no travel verry stiff


if you have lifted the front suspension by 3 inches then that is 3 inches less travel for the shocky piston to move when the suspension goes down. You have probably damaged the piston and shaft of the shocky. Replace with longer travel shockys.

Jun 01, 2013 | Cars & Trucks

2 Answers

1998 isuzu amigo 2.2l 5 spd 4 cyl .\r\ni need to


in all fuel injected cars you do not adjust idle. All you can do is clean the throttle and replace the Idle Air Control valve and check data thru a scanner to see if any sensors are out of specs. If this car has a maf sensor in the air filter tube it could become contaminated and cleaning or replacemnet will allow it to see more air which in turn allows the computer to add more fuel for better idling and accelration.

Jun 11, 2010 | 1998 Isuzu Amigo

2 Answers

How do I replace the camshaft position sensor on an amigo


4cyl? Its behind th timing cover between the cam pulleys. Should take about 15 minutes to replace. loosen upper cover and pull back to expose part

Aug 31, 2009 | 1998 Isuzu Amigo

1 Answer

I have a 1998 Isuzu Amigo 2.2L stick that is giving me major misfire issues. I just replace the head gasket and had the head redone, Verified the cam locations replaced all the plugs and wires and am...


You should have the check engine light on. Rent a scanner and follow all trouble leads. The trouble can be either fuel or ignition problems at this point. Put some water-removing additive in the fuel tank. Replace the fuel filter. You might do a compression check to verify the valve job. You might also put some injector cleaner in the tank as well. Were the valve clearances checked after the valve work?

Aug 19, 2009 | 1998 Isuzu Amigo

2 Answers

High idle in park and nutreal


what is thye correct idle rpm in park 1999 amigo

May 02, 2009 | 1999 Isuzu Amigo

3 Answers

1998 amigo timing 2.2 liter


The timing marks on the cam shaft sprockets are easily to see when you get the timing cover off. When the two cam shafts are lined up (pretty much at the top), then the crank should be almost down at the bottom.
Get yourself a good shop repair manual - I got mine from E-Bay for less than $15.00 (used).
Also, if your going to change the timing belt, have the water pump replaces at the same time.

Sep 12, 2008 | 1998 Isuzu Amigo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...