Question about Toyota Cars & Trucks

2 Answers

HOW DO I SHIFT MY 3L 1991 toyota hiace fuelpump for more horsepower for a faster takeoff

It starts great but ideles rough and drives very weak thoug it has recently overhauled why is this

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,585 Answers

You say over hauled. I over haul/rebuild engines and transmissions. The places I have worked don't. I did two engine rebuilds last week. One top end (head job), one bottom end (crank and bearings). Neither was an engine rebuild. But that is what you got charged.

Posted on Jan 02, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,747 Answers

Clearly the engine isn't running right and whatever is wrong with it needs discovering and putting right and a fuel pressure and delivery test will be part of the diagnostic process.

It is possible, considering the age of the vehicle and the fact lots of things will have been disturbed during the engine overhaul, that some of the electrical/electronic connections could be less than perfect, sensors damaged or just plain old and vacuum pipes split or wrongly connected.

The big mistake with working on old vehicles is assuming any repair or replacement will be straightforward when that is far from the truth. Things on older vehicles take two to three times longer because you don't simply fit an item as much as build it in to the vehicle with a high degree of engineering skill.
Failure to take that approach results in an inferior, flawed and unreliable vehicle that just wasted a load of money.

Posted on Jan 02, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which way do I shift my 3L Toyota hiace fuel pump for a smoothe idle it starts fine but idels rough and moves off weak ?


Best to have codes read if the engine light is on. start up and rough idle are different. Rough idle can be different things. When is the last time you had a tune up?

Jan 02, 2017 | Toyota Cars & Trucks

1 Answer

My Toyota hiace 3L when l start it idle normal but later it start raving on its own as if someone is pressing excelarator what could be the problem?


its a diesel ...this is the 2 ltr motor for an L3
when was its last service ?
is the idle adjustment knob in the cab on start up ok
then you wind it back
could be a vacuum issue/ sticking throttle cable
fuel pump problem /injectors
air filter
how old are the glow plugs



26279058-yqykbunjevtsx4rn1d2hale1-5-0.jpg

Sep 09, 2016 | Toyota HiAce Cars & Trucks

1 Answer

My toyota hiace 5l disel engine is overheating i have tried changing the head gasket but after some few days it started again what could be the problem?


The head bolts can be the major problem in overheating of an engine ,so before the toques of engine make sure the bolts are not stretched and the threadings are cleaned thats what ive discovered on my toyota 3l engine

Aug 21, 2013 | Toyota Passenger Cars & Trucks

1 Answer

Valve clearance 1995 toyota hiace diesel van 3l


normally .010"hot inlet and .012" hot exhaust

Apr 22, 2013 | Toyota Camry Cars & Trucks

1 Answer

1994 Toyota camray wagon


Need to adjust the shift cable at the transmission's shift level (Arm)


Mai

Mar 14, 2013 | 1991 Toyota Camry

1 Answer

What are the most common causes of engine (Toyota 3l) overheating?


i have a 3L engine toyota hiace and its overheating.water is dropping off the radiator mouth when i remove the cap when the engine is running.what could be the cause?

Apr 25, 2012 | Toyota Cars & Trucks

1 Answer

The O/D Off light keeps flashing while driving...after 1/2 hr drive...also slow take off at times.


The flashing light indicates an electrical malfunction within the transmission circuit. That along with the slow takeoff would suggest that the problem is a faulty shift solenoid, or damaged wiring harness connected to it. I had the same problem with mine, and it was the Number 2 Solenoid in the transmission. It can be accessed by draining the transmission and removing the lower cover. If the wiring is fractured internally but not completely severed (e.g. due to long term heat exposure and flexion) the problem would only occur sporadically. A temprorary workaround to the slow takeoff is to manually put it in 2nd gear and then back to Drive as you accelerate, that worked for me at least.

Oct 29, 2011 | 1991 Toyota 4Runner

1 Answer

I have a 2kd-ftv motor in a toyota hiace van, it starts and runs for 3-4 seconds getting lower and lower in revs till it stalls , sometimes it doesnt stall and picks up after same amount of time and idels...


Hi, you need to firstly replace the fuel filter, the problem is the idle solenoid in the pump has dirt in the piston! From the passenger side of the engine remove the solenoid at the back of the fuel pump 2x 5mm Alan bolts, there is 2 solenoids in the pump the one closest to the block is fuel temp. After the idle solenoid is removed, in the solenoid is a piston held in place by a circlip and there is also a spring in there, clean out all dirt inside and reassemble replace both o'rings and reinstall your problem will be solved. I have just fixed one 2 days ago.

Oct 31, 2010 | 2005 Toyota Tacoma

1 Answer

1991 toyota 3L V6 Overfueling, raw fuel pouring out exhaust pipes


check if your O2 sensor is working that is the thing telling computer how much fuel to put into motor it is on pipe close to motor your O2 sensor tests how much oxygen is pipe while running and tells to increase or lean back fuel

May 26, 2009 | 1994 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...