Question about 1994 Chevrolet C1500

1 Answer

Blazer will not go in reverse

I was driving the blazer heard a bad noise, and had trouble shifting into higher gears and I have no reverse, I also have a whinning noise comming from the tranny of my 2001 blazer

Posted by on

  • 1 more comment 
  • richard_wels Jul 21, 2009

    Automatic, also I just had the front carrier replaced, This was a sudden problem...it just quit

  • Michael Grey
    Michael Grey May 11, 2010

    Is the trans fluid full and a rich red color? If so I think the other solution is correct that a tranny is due.

  • Michael Grey
    Michael Grey May 11, 2010

    Automatic or manual?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need a new tranny! Just had that happen a few months ago to my 02 silverado. I would call a chevy delaership first and see if there are any recalls on them first before take it to a mechanic! Good luck with everything I know it can be a headache but make sure you get as many quotes as possible!

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1997 chevy blazer. the reverse isn't working the forward gears work just fine. do I need a different transmission?


Does it have a automatic or manuel trans? You said gears, manuel trans, possible shift fork, syncro, anyway you will need
some serious work done to it....rebuild it or replace it.....

Feb 28, 2015 | 1997 Chevrolet Blazer

1 Answer

Why won't my 1999 Chevrolet Blazer shift into reverse?


my blazer wont shift into reverse or out of first gear

Mar 31, 2011 | 1999 Chevrolet Blazer

1 Answer

1997 chevy blazer 4*4 will not go into reverse , drives and shifts sluggish in forward gears . parked overnight went to back up the next morning and vehicle was like neutral in reverse. fluid level is ok .


You may have a bad revers solenoid. Check the fuse and look for any of the fuse to be bad like the transmission fuse. Best thing to do is get the blazer scanned at Auto Zone free of charge for any DTC codes that may be affecting your transmission's performance. Try this, place the ignition to the run position and pull the ECM(BATT) fuse out for 30 seconds and then place it back in. Start the Blazer, it may stall but let it. Just start it again the ECM is just relearning the engine and transmission, let it idle for 1 min and then go for a test drive. This should reset everything in the truck's ECM like the day it was first started and any DTC code will be new and active. Do not add any additives like lucas transmission fluid repair, that will just make it worst. Any additive that may the transmission thicker will make the fluid retention more making the shift solenoid stick causing shift conflicts. Good luck and keep me posted. No revers is ether a bad solenoid, bad PCM signal, or broken sun gear. 

Jun 12, 2009 | 1994 Chevrolet C1500

1 Answer

1986 blazer won't shift into higher gears once driving


Check
Fuid levels, of course
fluid and flter change.
clean fluid will help clea valve body of varnishes
chk for modulator vacuum and oil seepage into vacuum hose
good luck

Apr 27, 2009 | 1986 Chevrolet S-10 Blazer

1 Answer

1995 Chevy S10 Blazer will not go into park.


theres a shift cable if its floor model,linkage for column model.

Apr 25, 2009 | 1995 Chevrolet Blazer

1 Answer

S10 blazer tansmission


You have a 4L60E whick is controled by your ECM. It sounds like you need and new transmission, the sun gear in it has failed and is the weak point on this transmission. 
When you get a new transmission have them to a corvette servo upgrade. The part is only $45.00 and the shop should know about the upgrade. It will make your truck shift a lot more firmer but last longer. 
Here is a write up http://s-series.org/component/option,com_tech_article/Itemid,/item,6/task,item/
Good luck and hope this helps

Apr 09, 2009 | 2001 Chevrolet Blazer

1 Answer

Automatic Tranmission forward gear works reverse doesn't


YOU HAVE A SHIFT SOLENOID THAT HAS EITHER FAILED OR IS STUCK, DO YOU HAVE ANY TRANS TROUBLE CODES?

Nov 02, 2008 | 1990 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...