Question about Nissan Cars & Trucks

1 Answer

91 Nissan truck 5 speed transmission location for reverse lockout

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 1,992 Answers

I didn't find a reverse lockout by that terminology in the Haynes manual, but there is a reverse check sleeve mounted on the left side of the transmission just forward of the gearshift assembly. It is covered by an oval shaped cover held in place with two bolts.

Posted on Jan 02, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76649 Answers

SOURCE: transmision shifting problem

Reverse is not sycronized, this means the gears have to stop to mess and not grind, two thing cause this, being to quick to slam into reverse after clutch is depressed, a problem with the clutch.

Posted on Oct 31, 2008

  • 1 Answer

SOURCE: 5 speed manual transmission. reverse will not engage

I had the same problem. A spring in the gear change selector had broken making it impossible to get into reverse and very difficult into first to fifth. Simple repair. Might be similar to your problem

Posted on May 05, 2009

SOURCE: I can't shift into reverse. All other 5 gears are

My VW is not shifting into reverse at all; I think a certain person was driving and mistakenly pressed the gear shifter down for all gears--reverse is the only gear you press the shifter down first in. Doesn't grind, 1 2 3 and 4 work but no reverse no reverse lights.
I've read several complicated (can't see scenario's) posts on screens and linkage and a cable fixed one guys problem but still no solutions.

Posted on Jan 03, 2010

  • 43 Answers

SOURCE: location of drain plug, fill plug and correct oil level plug for 5 speed manual transmission

I don't know if there is a fill plug. I just use the level plug located on driver's side right above the inner CV joint of the half-shaft (axle) to fill it. A piece of flexible tubing connected to a funnel works well. The drain plug is fairly near the center of the bottom of the gearbox housing (behind the bell housing). The level plug has a 24mm, fairly flat, hex head, and the drain plug is a recessed plug with a 3/8" (?) square hole (for a socket handle).

Posted on Apr 23, 2010

  • 1 Answer

SOURCE: transfer case chevy truck

How difficult would it be to swap from automatic to a manual transmission on a 1991 k1500 z71?

what parts / changes would need to be made?

Posted on Mar 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 Nissan Sentra won't go in to reverse, it just makes a grinding noise. Help!!!


The synchronizer for that gear could be bad . Will it go into reverse with the engine off ? https://en.wikipedia.org/wiki/Synchronizer

Apr 20, 2017 | Nissan Cars & Trucks

1 Answer

06 buick lucerne wonr crank key wont turn to off position shifter stuck in park


Define won't crank ? I'am assuming the key will turn to the start position ! When doing so does the starter spin the engine or not ? Trying to define your problem of won't crank . If when you turn the key to start position an the starter spins the engine over but doesn't start an run , this is a cranks no start condition . If nothing happens when you turn the key to start , this is a no crank no start condition . Your vehicle has a safety system , shift interlock , won't let it shift out of park if the brake pedal isn't pressed . Won't let the key turn off either . Electronics involved , locking solenoid's etc.... Floor or column shift ?
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM)/powertrain control module (PCM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The ECM/PCM sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.

Plus the reverse lock out !
The reverse lockout system is a safety feature which prevents an inadvertent shift into reverse at speeds above 5 km/h (3 mph). The system consists of the following components:
• The engine control module (ECM)/powertrain control module (PCM)
• The reverse lockout solenoid
With the ignition ON, battery voltage is supplied directly to reverse lockout solenoid. At forward speeds above 5 km/h (3 mph), the ECM/PCM commands the reverse lockout solenoid ON by grounding the control circuit of the solenoid. This energizes the solenoid and mechanically prevents the shift lever from being moved into the REVERSE position. At forward speeds below 5 km/h (3 mph), the ECM/PCM commands the reverse lockout solenoid OFF, de-energizing the solenoid, which allows the shift lever to move into the REVERSE position.

Power Mode Master
This vehicles BCM functions as the power mode master (PMM). The ignition switch is a low current switch with multiple discrete ignition switch signals to the PMM for determination the power mode that will be sent over the serial data circuits to the other modules that need this information, and so the PMM will activate relays and other direct outputs of the PMM as needed. Refer to Power Mode Description and Operation for a complete description of power mode functions.
You have no clue of the electronics in your vehicle , your best bet have it towed to the Buick dealer .

Apr 08, 2017 | 2006 Buick Lucerne

1 Answer

91 Nissan truck 5spd transmission , only gear that works is reverse and 5th gear, doesn't have a reverse Lockout or a reverse sleeve. Trying to rock back and forward of truck no luck, any suggestion?


if the gear lever is into the top of the box, remove the turret and pivot ball and see why the shifter rails are not lining up
if it is a column shifter , check all linkages for adjustment or fallen off

Jan 02, 2017 | Nissan Cars & Trucks

1 Answer

Bought a 91 Nissan truck, 5 speed transmission is stuck in reverse, how can I fix


Try rocking vehicle back and forth ( you need help) with pressure on shifter towards neutral

Jan 02, 2017 | Nissan Cars & Trucks

1 Answer

Where is the overdrive solioned for a 3.0L 1991Ford ranger located inside valve body of transmission


91 Ranger - No OverDrive - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Small Chassis Trucks > Ranger & B-Series
Nov 18, 2006 - 91 Ranger - No OverDrive Ranger & B-Series. ... 1991 RangerAutomatic 3.0L 186,000 miles. Today the overdrive didn't work on my truck. ...However, if it is not a solenoid on vacation, you have probable failure coming down ... 2000 Explorer 5r55e transmission issues, drive and reverse.
Feb 5, 2013
A4LD - 4R44E and 4R55E
Oct 19, 2011
Transmission Bang Shifting - Overdrive Off Light Flashes
Jul 21, 2008
91 explorer trans porblem/ no overdrive
Nov 17, 2007
More results from www.ford-trucks.com

Aug 26, 2015 | Cars & Trucks

1 Answer

Whining noise when engaging 1st or reverse.


i had a nissan pickup that would whine in all gears except 4th...it started out with 1st then reverse then went to the rest...solution was new transmission...or rebuild cause the syncronizers or the gears them selves are being chewed up...the new transmission was cheaper then a rebuild. or take it to somewhere that will do free diag on the transmission.

Mar 29, 2009 | 1996 Nissan Pickup

1 Answer

Where is the vehicle speed sensor located on a 91 nissan pickup


The speed sensor is located on the transmission towards the tail shaft. The housing that encloses the cable will attach on the side of the tranny. At this connection you will find the speed sensor right where it attaches to the tranny. There will be a couple of wires attached to the speed sensor.

Jan 15, 2009 | 1991 Nissan Pickup

2 Answers

Nissan will not go forward, only moves in reverse.


check the transmission fluid level and condition

Dec 27, 2008 | 1991 Nissan Maxima

1 Answer

Transmision shifting problem


Reverse is not sycronized, this means the gears have to stop to mess and not grind, two thing cause this, being to quick to slam into reverse after clutch is depressed, a problem with the clutch.

Jul 27, 2008 | 1991 GMC Sonoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...