Question about 2004 Mercury Mountaineer
Car stalls when i put it in gear after i change vacum control valva
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Go to carhelpsite.com it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't have to buy or fill out anything on the ads,so help keep the site free.
Posted on Apr 13, 2010
SOURCE: I HAVE A 2004 MOUNTAINEER
I understand all you said
Without the vehicle and a fresh
diagnostic approach, I personally
don't think any internet ideas will help
You still have misfires, that are spiking the PCM &
TACM on the throttle body and putting it
into ETC Fail Safe.
Posted on Feb 25, 2011
You engine needs three basic things to operate correctly Air,Fuel and ignition.Lets start with Air.check the air filter to see if it is dirty if so, replace filter and see if that solves the problem. Fuel.replace the fuel filter see if that solves the problem.Ignition. this gets complicated fast.Start with spark plugs,then spark plug wires, distributor cap and rotor( if equipped).newer vehicles have coil packs and are computer controlled. A service professional is probably needed at this point.
Hope this helps.
Posted on Sep 22, 2015
Tips for a great answer:
Jan 04, 2016 | Cars & Trucks
Feb 20, 2012 | 1995 Buick LeSabre
Dec 05, 2011 | 2004 Mercury Mountaineer
Sep 30, 2011 | 1998 Mercury Grand Marquis
Feb 25, 2011 | 2004 Mercury Mountaineer
Mar 25, 2010 | Chevrolet 1500 Cars & Trucks
Aug 01, 2017 | 1997 Dodge Avenger
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: