Question about Jeep Cars & Trucks

2 Answers

2011jeep po869 code tfp sensor high what do i do

Posted by Anonymous on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

2011 , no jeep stated, they have names, what is it ,
is it in USA> and is it with automatic trans.
in usa there are 5 jeep models, pick on?
is engine gas (petrol or diesel)
my guess that was TPS, P0869
ill now pretend you said, Grand Cherokee, usa.
and i look in the book and it shows.
P0869-LINE PRESSURE HIGH you can read the words , in the book (JEEP)
"Theory of Operation
Line pressure is measured by the Line Pressure Sensor (LPS) and regulation is achieved by changing the duty cycle of the Pressure Control Solenoid (PCS) controlled by the Transmission Control System. (5% duty cycle = solenoid off = max line pressure, 62% duty cycle = solenoid on = min line pressure). The Transmission Control System calculates the desired line pressure based on inputs from both the engine and transmission.
The Transmission Control System calculates torque input to the transmission and uses it as the primary input to the desired line pressure calculation. This is called Torque Based Line Pressure. In addition, the line pressure is set to a preset level 827 or 931 kPa (120 or 135 psi) during shifts and in Park and Neutral to ensure consistent shift quality. The desired line pressure is continuously being compared to the actual line pressure. If the actual line pressure is consistently higher than the highest desired line pressure ever used in the current gear, the line pressure high DTC P0869 will set."

means get car serviced.

Posted on Jan 03, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Jeep Master
  • 102,366 Answers

P0869 JEEP - Transmission Fluid Pressure High

Posted on Jan 02, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

After heater core replacement now have code p0871,p0760 2008 dodge ram

the code p 0871 refers to transmission fluid pressure (TFP) sensor C --range performance malfunction===causes --wiring--poor connection---TFP sensor ---ECM /TCM
code p 0760 refers to shift solenoid (SS) C circuit malfunction===causes --wiring --shift solenoid --ECM/TCM
now making the assumption that there was nothing wrong with the transmission before working on the heater and the common listed causes is wiring and connections , it would be logical to look for harness connections during the work that were missed in reassembly process

Nov 17, 2017 | Dodge Cars & Trucks

2 Answers

Wanted to check if anyone had a answer to my question?

code p 0700 refers to transmission control system/MIL--malfunction===causes --wiring ---TCM
code p 0846 refers to transmission fluid pressure (TFP) sensor B--range/ performance problem ===causes --wiring --poor condition---TFP switch---ECM/TCM
also refers to TFP switch B--range /performance with the same causes

Jul 23, 2017 | Dodge Cars & Trucks

1 Answer

What does code po845 , that keeps appearing on my Mercedes ML350

code p 0845 refers to transmission fluid pressure (TFP) sensor B --circuit malfunction===causes --wiring---poor connection --- TFP sensor ECM/TCM
check all wiring and connections for corrosion
replace the TFP sensor

May 26, 2016 | Cars & Trucks

1 Answer

How to fix code p0876 p0841

code p0876 refers to transmission fluid pressure (TFP) sensor D---range /performance problem===causes --wiring--poor connections--TFP sensor--ECM/TCM
check the sensor /replace or check the TCM (transmission control module)
code p0841 refers to TFP sensor A--same as the first code and same causes and fix suggestions

Jun 23, 2015 | Cars & Trucks

1 Answer

Po870 code on my Honda

code po870 refers to transmission fluid pressure(TFP) sensor C---circuit malfunction===causes--wiring---poor connection--TFP sensor---ECM/TCM. Check that the wiring and connections are in good condition and all the pins are clean. Replace the sensor and have the transmission control module check out.

Jan 07, 2014 | 2001 Honda Accord

1 Answer

Troubleshooting oem brand : acura po847

code p0847 refers to transmission fluid pressure (TFP) sensor B--low input===causes--wiring---short to ground---TFP sensor--ECM/TCM

Try replacing the sensor and checking the wiring. After that check the transmission control module (TCM)

Dec 30, 2013 | Cars & Trucks

1 Answer

After driving a bit the "d" drive indicator starts flashing on my 2009 CSX. Diagnostics indicate P0843 code. What is this?

code p0843 refers to transmission fluid pressure (TFP) sensor A --high input===causes --wiring ---short to positive --TFP sensor---ECM/TCM
replace the sensor .

Dec 14, 2013 | 2003 Honda CR-V

1 Answer

Loss of power, transmission issues

code p0700 refers to transmission control system/MIL --malfunction===causes --wiring ---TCM (1)
code po740 refers to torque converter clutch (TCC) solenoid--circuit malfunction===causes--wiring--TCC solenoid--ECM/TCM (transmission control module) (again)
code p0871 refers to transmission fluid pressure (TFP) sensor C -range/ performance problem==causes---wiring--poor connection--TFP sensor--ECM /TCM (yet again)
code p0734 refers to gear 3 ratio (po374 is gear ratio 4) incorrect ratio===causes --wiring--TR sensor/switch--shift solenoids--transmission mechanical fault (causes are the same for po733&734)
code po846 refers to transmission fluid pressure (TFP) sensor B-range/ performance problem===causes ---wiring--poor connection--TFP sensor--ECM/TCM (again). Give the clutch a miss as you still have 1st gear and if the clutch is not working you will not be going any where. Have a pressure test done on the transmission to check for internal mechanical failures (pump ). The rest are sensors are wiring connections , sensor and TCM. My bet is the TCM unit. Have it checked out. What ever you do treat any suggestion of a new transmission with a grain of salt until you are shown proof positive that you need one.

Nov 15, 2013 | 2003 Dodge Neon

2 Answers

I have error codes for 2001 gmc sonoma sls p0122,p1810,p0410

p0122 is a throttle position sensor/switch bad.

p1810 is a TFP valve position switch circuit/transmission 4wheel drive low indicator short circuit to battery.

p0410 is a secondary air injection system malfunction.

Nov 17, 2012 | 2001 GMC Sonoma Extended Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides