Question about Cars & Trucks

1 Answer

120gm to ml

Convert 120gm to milli litres

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,727 Answers

This cannot be done without making assumptions about the density, since gms are units of mass, and ml of volume. Different things.

For water, a good average, 120 gm is 120 ml
.

Posted on Jan 02, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Convert gallons to litres


Hello Ian Wright

One gallon = 3.78541178 Liters

Carnac the Magnificent

Jun 12, 2017 | Cars & Trucks

1 Answer

HOW MANY MILLILITRES TO 1 LITRE ?


Milli means thousandth. Centi means hundreth. Micro mean millionth. One milliliter is one thousandth of one liter.

Apr 26, 2017 | Cars & Trucks

1 Answer

6 546ml is equal to how many litres?


1000 ml = 1 liter
work it ou t

Jul 27, 2016 | Cars & Trucks

1 Answer

How litres of lpg per ten kilometers for a Daewoo lanos


as lpg expands to around 200 times the liquid state it will be difficult to calculate as how you want it
the car has a liquid tank but the liquid is converted to gas in a converter on the manifold.
basically from experience an engine on lpg gets about 75% of the mileage as if it was on petrol for the same amount of lpg in litres
talk wit an accredited specialist automotive gas fitting shop and they may be able to give you a better idea
you can work it out by filling the lpg tank to shut off and setting the trip meter to zero and then when you have done say 100 klms refill the lpg tank to shut off and that will indicate how many litres were used in that 100 kilometers

Aug 12, 2015 | Daewoo Cars & Trucks

2 Answers

How to change the transmission oil, and how many quarts to use, knowing that the SUV has what is called a sealed transmission.


Basically, these transmissions are filled using what's called a "double fill" technique. There are two drain plugs, one which actually drains the pan, and another that has an overflow collar inside that sets the level. You basically pump transmission fluid in with the engine off and the overflow plug out, until the fluid starts to flow out of the plug. Then start the engine and let it idle, pump in more fluid again until it starts to overflow again, and then replace the drain plug. This is supposed to be done with the ATF at approx. 40deg C, or basically just warm to the touch. You will likely need around 4 qts of fluid.

Dec 25, 2014 | 2006 Mercedes-Benz ML 350

1 Answer

How to convert 80 ml to 80 mg


Hmm injection eh?

Well, 80 mg is not 80 ml, nowhere near.

For pure water 1 ml is 1 gram. So 80 ml is going to be 80 g which is 80 000 mg. This all comes form the base relation 1 litre (1000 ml) is 1 kg (1000 g).

For other substances, it will be a bit more or less than 1 gram in a ml, but not much.

It would help us both to know what is the injection, we are not the police.

Aug 17, 2014 | Cars & Trucks

1 Answer

How many kilogram of oil engineneeds a Nissan murano 2004?


In the United States we don't use Kilograms as a measure of oil we use Quarts. Your country uses Litres wherever you are! THe MUrano uses 5 quarts of oil...you convert it to litres and you get .95 litres = one quart. Just use 5 quarts and all will be OK.

Jan 02, 2013 | 2004 Nissan Murano

1 Answer

I have a 2000 jeep wrangler, 4.0L 6 cyl. what would be the fluid capacities for the transmission and the transfer case?


If you have the automatic trans it takes 3.8 litres of fluid if doing a service with the filter. If you drain the torque converter (usually only on a tranny swap or new install) it takes 4.7 litres if it is the 30RH tranny and 6.4 litres if it is the 32RH tranny (call the dealer with your vin number to find out which one you have).

If you have a manual trans it takes 2.3 litres.

As for the transfer case there are 4 different transfer cases used that year.

NP242 takes 1.4 litres
NP247 and NP249 take 1.6 litres
NP213 takes 1 litre

Again you can call the dealer with your vin to see what transfer case you have if you don't know.

Feb 27, 2011 | 2000 Jeep Wrangler

1 Answer

How much auto trans fluid does a 4.6 litre 1999 range rover really hold?


Best is to fill about 5 litres and start the vehicle.While idling fill oil in 500 ml incriments while checking the level in between.Each vehicle seems to have a mind of its own.I have had no experience with Comma oils.Most effective would be to replace the transmission filter at the same time and there will always be a little oil left in the tourque converter hence the high volume in your manual.

Oct 24, 2008 | 1999 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...