Question about 2005 Jeep Liberty

1 Answer

Air in the fuel system

I have a 2005 Jeep Liberty CRD which runs great, unless it sits for 4-5 days. Then it won't start unless I use the primer pump first. It sounds like an air leak to me, but I can't find any evidence of a leak anywhere. Is this a common problem with the CRD ?

Posted by on

  • eyerbw1943 Jul 21, 2009

    I just obtained a service bulletin, #18-011-09, from the local Jeep Dealership. It describes the problem that I've been experiencing and recommends replacing the fuel filter housing with a "new and improved" model, part # 68043089AA. Apparently, the old filter housing allows air into the fuel system.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

There is also a lift pump in the fuel tank with a one way valve, sounds like u r loosing ur fuel pressure somewhere in the system i would check there first and work my way towards the engine

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power.


What color is the smoke?
White,blue or grey?
Please post the color of smoke on reply.

========

Use a bottle of yellow HEET dry gas to remove any moisture problem in the fuel.

Clean / replace air filter.

Top off ATF to MAX level.

Use starting fluid to aid starting.

=========

Jan 16, 2014 | 2005 Jeep Liberty

1 Answer

Jeep liberty 2005 crd start and engine goes off after four seconds


To start with, most models have a fuel pump relay that gives the pump voltage until the computer sees that the engine is running.
Sounds like the computer is not knowing the engine is running, so there is no power to the pump after it starts.
It could also be something with the anti-theft system.
Is the check engine light on ?

Jul 07, 2012 | 2005 Jeep Liberty

1 Answer

What fuse is for the PCM on a 2005 Jeep Liberty?


It's 10A FUSE 14 in the junction block.

Oct 07, 2017 | 2005 Jeep Liberty

1 Answer

Where is the fuel pump located on a 2005 jeep liberty 4 wheel dr


I suggest check fuel pump module, sound like go to bad.


12_7_2011_3_30_29_pm.jpg

Fig. Top view of the fuel pump module-Liberty

If you need additional deyails or soem specific section about Repair Manual, feel free to contact us in the links.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 07, 2011 | 2005 Jeep Liberty

2 Answers

Changed fuel filter in my diesel liberty now it wont start


possible air in the fuel system. There may be a bleeder for you to open and purge the air from the fuel system

Feb 19, 2011 | 2005 Jeep Liberty

2 Answers

Chrysler voyager 2.8 crd 2006 wont start without pumping the fuel primer replaced fuel filter and housing . checked in tank no primer pump found ?


Even though your vehicle starts and runs but dies, Your fuel pressure doesnt seem to be pushing enough pressure. It could be a faulty fuel pressure regulator.

Nov 23, 2010 | 2004 Chrysler Voyager

1 Answer

2006 Cherokee KJ 2.8 CRD intermittent problem. Engine starts then stops. After priming at fuel filter will start & run ok


fuel pump relay . you should hear the fuel pump run for 5 seconds as soon as you turn the key on .after that the cranking sensor takes over when engine it turned over to start

May 26, 2010 | 2006 Jeep Liberty

Not finding what you are looking for?
2005 Jeep Liberty Logo

Related Topics:

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...