Question about Cars & Trucks

1 Answer

Ford Transit 2002 Diesel Vehicle starts and runs ok and turns off with key Turn engine off, all functions still working dash lights still on etc I have to remove cigar lighter fuse to deactivate

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 74,945 Answers

Open another door other than the driver door and see if the lights and all go off. If so the delayed exit may be staying on for some reason.

Posted on Jan 02, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whole dash went out on my 2002 gmc envoy all the gauges arent working i checked fuses under the hood they seemed fine. Any advice for these problems?


Does it light up ? When you turn the key on do the warning lights come on ? Check engine , oil , abs , air bag etc... just gauges not working ? Does the vehicle start an run ? With vehicle running is check engine light on ? GM had a problem with the stepper motors that control the gauges . How to repair GM Instrument Cluster Speedometer Gauge Stepper

Sep 12, 2016 | 2002 GMC Envoy

1 Answer

Got 2003 turbo diesel ford transit auto trans, I replaced both batteries n now when I go to start the van the Reds turn on n nothing, gear selector is no longer registerin n not a single click is made


If the dash lights do not come on:

The most common cause of this is loose battery connections. The battery is located underneath the driver's seat. Turn the ignition to the on position and slide the driver's seat forward. The battery is concealed with a plastic flap, remove the flap. Check the tightness of the two terminals while looking at the dash, if the dash lights up, then you know what the problem was. ·

If the dash lights are coming on and the vehicle makes no attempt to start:

The most common cause is the starter motor terminals. These can overheat and fuse. This type failure is very sudden and shows no warning signs. The only cure is a replacement starter motor.

May 19, 2015 | Ford Cars & Trucks

2 Answers

My Ford Transit Diesel 2007 (camper van)intermitantly loses power and the Engine Malfunction light comes on. If I stop, turn off the engine and restart it a few minutes later everything goes like a ch


When the engine is under load it uses more fuel then normal .First replace the fuel filter then check the fuel pressure and flow. the pressure and flow are checked with gauges. For a rough check remove the return pipe from the fuel rail, if fuel is flowing there the fuel system should be ok providing the pressure valve is not stuck open. if there is no flow there the pump may be at fault.

Nov 13, 2014 | Cars & Trucks

1 Answer

I just installed fuel pump in my 2002 ford escape the pump now work but the egine will not roll over but the battery is fine i out in my new car and it started that


There are several possible issues depending on what you have happening such as - is it cranking over or not. Ford used their wonderful passive security systems on these years of vehicles which can be a real pain. If you use a test light and are getting power to the starter switch (small wire on starter solenoid) when friend turns key to start but it is still not turning over then starter is not functioning. If your interior lights and dash lights all work when key is turned to on but everything goes off when you turn key to "start" position try cleaning battery terminals. If terminals clean or even better if terminals clean and you jump with jump box or jumper cables and it still not cranking check with test light as mentioned above and if no power to start switch check relay in underhood fuse box. Swap the "starter" one with one from fan or other of same size and see if starter will now turn. If you can turn the key on and hear the fuel pump turn on (buzz or whine from rear) and the engine cranks over trying to start but will not - it may be the passive security system. The chip in key or the reader for it may have died. Each key is $75+ and if you do not have two good keys they (Ford Dealer) will charge you for making two keys and activation fees - Total $300 - plus getting the vehicle towed in. The vehicles computer tests many sensors before letting vehicle actually start so it is normal for it to crank for a few seconds before it actually fires. If it senses something wrong in that first few turns like no crank or cam sensor reading it will not allow vehicle to start. You can read codes with a code reader for this by testing with key on and not running.

Mar 30, 2011 | 2002 Ford Escape

1 Answer

Glow plug light goes out as soon as i turn the ignition on, have new glow plugs but still does the same.. could you help me with this. I have ford transit 2002, 2lt diesel engine


thats how it should work...the glow plugs on those engines dont really help cold starts they are fitted to clean up the emmisons from cold starts as it stops the tree huggers from complaining to much.....

Oct 26, 2010 | Ford Transit Connect Cars & Trucks

2 Answers

Transit van won't start after wash


there might be water in the fuel pump trying openning sedometer and pump out the water until diesel comes

Sep 30, 2009 | 1998 Ford Taurus

1 Answer

Program 2002 Mercury Sable Key


For convenience, I'm also including a list of other vehicles that these instructions apply:
Ford Contour ‘98–up
F-150 ‘98-up
Ford Crown Victoria ’97-up
Ford Escort 99-up
Ford Excursion ‘00-up
Ford Expedition ‘98–up
Ford Explorer ’98-up
Ford Focus ‘00-up
Ford Mustang ’96-up
Ford Ranger ’98-up
Ford Taurus ’96-up
Ford Windstar ’98-up
Lincoln Continental ’98-up
Lincoln LS ’00-up
Lincoln Mark VIII ’98-up
Lincoln Navigator ’98-up
Lincoln Town Car ’98-up
Mercury Grand Marquis ’97-up
Mercury Mountaineer ’98-up
Mercury Mystique ’98-up
Mercury Sable ’96-up
NOTE: These instructions may apply to more or less vehicles than those listed above. I cannot confirm that these procedures work for every year and model listed. See your dealer if to confirm this.
On-Board Programming Method "B" for Ford keys (1996 -early 1998 Ford, Lincoln, Mercury)
If you want to initiate a new master key.... 1. Insert new key into ignition cylinder and turn it to the ON (RUN) position. The security light on the dash will flash for fifteen minutes.
2. When the security light stops flashing, you have FIVE minutes to start the next step. Turn the ignition cylinder OFF and then back to the ON (RUN) position. The security light on the dash will flash for fifteen more minutes.
3. When the security light stops flashing, you have FIVE minutes to start the next step. Turn the ignition cylinder to OFF and then back ON (RUN) position. The dash will flash for fifteen more minutes.
4. After the security light stops flashing the third time, the new key has been programmed into the vehicles computer and will operate the car. It has replaced ALL the previous electronic key codes and is the ONLY key programmed into the vehicles computer.
If you want to add a key.... 1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within 15 seconds, insert the new key and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming the key into the vehicle.
5. Don't attempt to start the vehicle with any key for at least 1 minute.
On-Board Programming Method "C" for Ford keys (Later 1998-newer Ford, Lincoln, Mercury)
If you want to initiate a new master key.... 1. This requires that the vehicle be connected to special dealer equipment. There are two ten minute delays involved while this device erases all existing key programming and sets up the vehicle computer to accept new key codes. Two new keys should be ready because the system requires a minimum of two keys in the program. After the first two keys are programmed, additional keys can be entered individually by following the instructions for adding duplicate keys (below).
If you want to add a key.... **You must have two original keys to perform this procedure. If you only have one key, you WILL have to take it to the dealer to get it programmed**
1. Insert and existing (working) key into the ignition cylinder.
2. Turn the ignition cylinder ON (RUN) and back to OFF. Ignition should stay on for at least ONE SECOND.
3. Remove the existing key and, within TEN seconds, insert a second working key and turn it to ON (RUN) and the back OFF. Ignition must be in ON for at least ONE second, but no more than TEN seconds. Remove the key.
4. Insert the new key before TWENTY seconds have elapsed and turn it to ON (RUN). Leave it the ON position for at least ONE second and turn back to OFF.
5. The security light will light up for THREE seconds to indicate that the new key has been successfully programmed.
6. To program additional keys, repeat steps 1 through 5
As a precautionary measure for all of the above procedures, you should wait at least one minute after you have performed this until you start your vehicle.

Mar 27, 2009 | 2002 Mercury Sable

1 Answer

Engine turns over will not start, new battery, low power on dash


check battery terminals for corrosion, also try running a new ground wire to motor

Dec 24, 2008 | 2002 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...