Question about Cars & Trucks

Open Question

Opus Pro OPL-L150 flash fuse keeps blowing. It was never dropped. I flicked the on button and nothing came on. It is about 8 to 10 years old.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 suzuki grand vitara keeps blowing the fuses for the ACC outlets. both are 15AMP, but even with nothing plugged in, nothing down in the outlets and even with larger AMP fuses, they keep blowin


If you use too large a fuse, the wiring can catch on fire, and the whole car could burn up. You'll need an auto electrician to trace that problem. You can remove any bulb and unplug any device that is on the Acc(essories?) circuit; then see if a fuse will stay; start replacing items till you blow the fuse. It seems like a dead short which can surely melt wires if you keep taking chances. good luck.

Feb 14, 2015 | 2008 Suzuki Grand Vitara

1 Answer

Why i keep blowing a fuel pump fuse?


Hey Paula, if it keeps blowing that could mean a short in system or more so the pump is having trouble pumping it is 20 years old also check the fuel pump relay

Oct 17, 2014 | Cars & Trucks

1 Answer

What to do when your dome light keeps blowing fuses. on a 2012 toyota corolla vvt-i


Take to a local repair shop

What have you done from the day you first owned
any vehicle & had no idea what to do or how to fix it?

When any fuse blows it does so for a reason

I personally, seldom try a new fuse & never
more than one--why would you,fuses do not
make for a fix,you have to find the short or current
overload & they are very rare,nothing like the epidemic
spread on the internet in the last several years

People install new fuses when the old ones are perfectly good

Half the people answering questions here, would have you replacing
all sorts of relays,if you have one bad relay in 50 years that is a lot

Jul 16, 2014 | 2012 Toyota Corolla L Sedan 1.8L 4-cyl....

1 Answer

40 amp Abs fuse keeps blowing


in engine bay?
you have a short.
and the fuse stopped the fire.
i have a current limited power supply that allows me to do this easy
but other us a circuit breaker at the old fuse.
then drops loads until the breaker stop popping.
there are other way, most blow a box of fuse.
the 3rd way
is to drop all loads on that fuse. (new)
and then put them back 1 by 1, BAM , now you know.

Feb 11, 2014 | 2007 Toyota FJ Cruiser

1 Answer

Blower motor fuse


always start on a switch when they all they cause that

Nov 13, 2013 | 1998 Mercury Mystique

1 Answer

2008 Chevrolet Malibu 2LT mirror fuse keeps blowing


Remove the door panel and isconnect the mirror and see if the fuse still blows, if it does the wiring is at fault to the mirror, if no fuse issue the mirror motor is shorted.

Nov 04, 2013 | Chevrolet Malibu Cars & Trucks

1 Answer

I have a 1984 Chevy Silverado 2wd it keeps blowing fuses that make my parking lights and interior lights work my head lights still work every time I put a new fuse in and as soon as I pull the light knob...


1st common area is trailer wiring,2nd is shorted bulb,3rd is corroded/damaged wiring.Replace fuse with circuit breaker which fits in fuse position and first check for a bulb that's out and shorted,shake and move any trailer wiring,if that didn't find a problem,temporarily install a signal light flasher into the tail light fuse connections and slide a compass along wiring and compass will flick/change reading as the flasher flashes until you hit the shorted area.(an old trick to fine a short)

Oct 22, 2017 | Cars & Trucks

1 Answer

1990 festiva blows 10 amp but blows fuse after engine staetsfuse everything woeks fine with key in on position


Get a wiring diagram & see what is on that fused
circuit & work that circuit. Leave the fuse out at
first & make sure only that fuse & circuit is involved

When a car gets over 15 years old, then & only
then, do you start to have fuse issues as wiring,
connections,relays,switches & devices using electrical
current, start to get loose,corroded,& develop resistance

I would remove & clean every ground wire on the car you
can find

Both ends of the battery cables as well

Do voltage drops afterwords on cables

Check for alternator diode leakage or what
is called a/c ripple

Check for current draw by putting an amp meter
in series with either battery cable & wait for things
to time out,make sure you leave the doors closed
& allow at least 10 to 15 min.

You shouldn't have over 50 to 70 milli-amps

Just the clock & computer memory & some keep
alive items

Don't keep replacing the fuse,that is not a fix

Nov 13, 2012 | Cars & Trucks

1 Answer

Keep blowing ECM fuse on 90 honda accord


I'm thinking the ECM is bad and grounding out, causing the car to blow the fuse. The old gas wouldn't cause this problem.

May 27, 2009 | 1990 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...