Question about Cars & Trucks

Open Question

HOW DO I GET TO WERE I ENTER MY CODE NUMBERS - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery was disconnected,How do I enter the code


New Arrival V15 GDS VCI Diagnostic Tool for Hyundai and Kia

Go to Radio and Navigation Codes website if you cannot find your anti-theft radio identification card. Click "Continue" to get to the first page.
Enter your Vehicle Identification Number or VIN when prompted. The VIN is 17 digits and is found at the bottom of the windshield on the driver's side.
Click "Continue" and follow the prompt to enter your phone number and ZIP code. You must enter the phone number and ZIP code that are on file with the dealer. If you haven't changed them, the information is the same as when you purchased the vehicle.
Choose "Continue" and move onto the page to enter your radio serial number. On 2001 and later vehicles, you can find your serial number by pressing and holding the numbers "1" and "6" on your stereo while the vehicle is off. Turn the stereo on and watch for two sets of numbers. The screen will switch between one set of numbers and the second. Each number will start with a letter. Don't worry about the letter and write down both sets of numbers. That is your serial number. For models earlier than 2001, you will have to get the serial number off the back of the stereo. If you don't know how to take the stereo out, you will have to take your vehicle to a dealer.
Enter the radio serial number when prompted. Once you've entered the correct information, Honda will provide you with your radio unlock code. Enter it as directed in the first section.

Oct 10, 2014 | Cars & Trucks

1 Answer

How to enter radio code


DEPENDS ON THE MAKER OF THE CAR

When you turn your car on... Does the word "CODE" Show up?

If it does... Then using the Radio Channel Selector Buttons like they are Numbers....

Codes are normally "4" numbers

Enter the code and then it either accepts it and you have your Radio or rejects it.

If you put the wrong code in too many times, then you will be locked out and are required to bring the car to the Dealership. they have a Special Computer that can reset the radio and allow you to re-enter the code again. I would get the Code from the RADIO and ensure you have the correct Code before I got too far along

Apr 05, 2013 | Cars & Trucks

1 Answer

Enter radio code BMW 1998 M3


Use the CD selection numbers. The numbers should range only from 1 to 6. Once you enter all 5, it should accept it unless the code is wrong.

Mar 03, 2013 | 1998 BMW M3

2 Answers

I have just put a new battery in my 1992 3.1i8 BMW and consequently reset the radio. It has locked in 3 dashes and I can't enter any numbers in. Any help would be greatly appreciated!


If you do not have the book for the radio, I believe there is a trick to entering the code. Its not just using the numbers. I think you have to hold another button down while entering the code or use the station up down button to enter the code. Try hitting all the buttons one at a time and see if that enters anything on the desplay.

Jan 30, 2013 | Cars & Trucks

1 Answer

Radio is locked


Theftlock Bypass

1. Press and hold presets 2 & 3 for about 10 seconds until the first 3 digits of the display code are displayed.

2. Write the numbers down.

3. Press the AM/FM button, write down the next 3 numbers.

4. Call 1-800-537-5140, when asked, enter 620529, press the # button and enter the 6 digit code from the radio, you will get an unlock code, write it down.

5. Go back to the car, press the HR button and set the first 2 numbers, then press minute button and set the next two last numbers, press AM/FM button, SEC should be displayed, turn on radio.

To remove customers code, repeat step 5. you should see --- on radio face, the code is now out of the radio.



EDIT: Updated with new dealer code. FWIW, the old code was 202107

Dec 30, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

I own a Kia '95 Kia sportage. Don't know how to enter radio code


i think you must put the numbers and then use volume button as "enter" that's it

Apr 17, 2010 | 1995 Kia Sportage

1 Answer

Problem with entering anti-theft radio code for Honda Fit: The radio screen says: "Enter Code:" I enter the confirmed correct code, but when doing so when the actual code (all numbers) turn into letters or...


when you use the "preset keys" (the keys on the radio with numbers on them) to enter the code, each time you press a code number, a letter appears [c, o, d, e]. once the word is spelled out, from entering the correct 5 digits, the radio is reset, ready to go.

BUT if you miss a number, enter a wrong number, whatever, each number pressed, still makes a letter appear from the word "code". once the word is spelled out, by entering ANY 5 numbers, if ANY of the 5 is wrong, the radio displays a message "Error" and then a number 1 thru 10.

When you see the word "Error..."

the next preset button you push, starts the whole thing over again. The radio says "Enter code". That is when you enter the 1st of the 5 digits, the letter C appears, enter the next digit, the letter O appears, enter the next digit, the letter D appears, enter the last digit, the letter E apperas, the radio is reset, ready to go, if you got the 5 correct numbers entered.

you have 10 chances to enter the right 5 digit code. Each wrong try of 5 digits yeilds a display of "Error 1", "Error 2", "Error 3", etc 'till you get to 10 incorrect tries of 5 digits each.

If you dont get it right in 10 tries, you have to leave the radio "on" for an hour, then it will let you start the 10 tries over again.

Good luck!

Apr 26, 2009 | 2007 Honda Fit Sport Hatchback

1 Answer

Need radio code to unlock


if you have your code and need to know how to enter the code , it should be as follows .

Unlock procedure for six digit codes. Push the "Hr" button, 000 will appear in display. Press the hour button until you match the first number of your unlock code. For second two digits of unlock code press the "Min" button until numbers match. When first three digits of unlock code is entered into display, push the AM/FM button. Repeat the above process for second set of three numbers of unlock code.

if you need more assistance, post comment before voting thanks .

Jan 11, 2009 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...