Question about Cars & Trucks

Open Question

Single whole model. The mounting nut has been tightened completely but unit still wobbles.

Posted by on

  • Brian Imperatore Jan 01, 2017

    Hi Cherie Spaulding, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? what is we are talking about here

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: steering wheel

there is a cover on the bottom of the steering wheel.pop that open and there will be a 7mm bolt if it's loose just tighten it.turn to the right.if it is that style if not there will be a plug on each side on the back and two 8mm bolts

Posted on Jun 25, 2008

Ad
  • 7353 Answers

SOURCE: front motor mount on 1993 camry 4 cylinder

The mount is probably bad anyhow. so get it out however you need to, you can always cut the nut or bolt off and the new mount will have a new stud. so you will only need a nut.

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the torque spec for the front wheel bearing on a 1964 Chrysler New Yorker?


http://www.automobile-catalog.com/make/chrysler/full-size_chrysler_4gen/full-size_4gen_new_yorker_sedan/1964.html

http://www.automobile-catalog.com/auta_details1.php
25607247-yjo0ud12y22pkmokvfqa1yzz-2-0.gif
NOTE: Always install a new hub nut. The original hub nut is one-time use only and should be discarded when removed.
11. Install hub nut on end of halfshaft stub shaft. With aid of a helper applying brakes to keep front hub from turning, tighten hub nut to 160 N·m (118 ft. lbs.).
12. Install tire and wheel assembly. Install and tighten wheel mounting nuts to 135 N·m (100 ft. lbs.).
13. Lower vehicle.
14. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
15. Check and adjust brake fluid level as necessary.

Mar 25, 2015 | Chrysler New Yorker Cars & Trucks

1 Answer

How to replace alternator


1990-93 Accord
  1. With the ignition OFF, disconnect the negative battery cable.
  2. Remove the power steering pump. Refer to Section 8 for the complete procedure.
  3. Remove the cruise control actuator but do not disconnect the actuator cable; simply move the unit out of the way with the cable attached.
  4. Unplug the multi-pin electrical connector.
  5. Remove the terminal nut and remove the wire from the terminal.
  6. Loosen the adjusting bolt; remove the alternator nut. Fig. 3: Alternator mounting on 1990-93 Accords 86803003.gif

  7. Remove the belt from the alternator pulley.
  8. Remove the adjusting bolt, the lower through-bolt and the small support stay.
  9. Support the alternator. Remove the upper through-bolt and remove the alternator.
  10. If desired, remove the alternator mounting brackets. To install:
  11. If the alternator brackets were removed, reinstall them. Coat the bolts with a thread sealer or liquid thread lock. Install the bracket bolts and tighten them to 36 ft. lbs. (50 Nm).
  12. Fit the alternator into place. Install the upper through-bolt and tighten it to 33 ft. lbs. (45 Nm).
  13. Install the small stay, the lower through-bolt and the adjusting bolt. Make certain the adjusting bolt is properly installed.
  14. Install the belt. Install the alternator nut. Adjust the belt tension. Tighten the alternator nut to 19 ft. lbs. (26 Nm).
  15. Connect the wire to the terminal and tighten the nut.
  16. Engage the multi-pin connector to the alternator.
  17. Install the cruise control actuator.
  18. Install the power steering pump.
  19. Connect the negative battery cable.
next.gif

Jan 21, 2011 | 1991 Honda Accord

1 Answer

Dear Sir, How do you change an 87 mitsubishi mighty max front shocks without any compression equipment? Please email me at brad8141@hotmail.com. Is there a book with instructions regarding this...


REMOVAL & INSTALLATION
  1. Support the vehicle safely on jackstands. Support it at a height which will allow sufficient room to reach the upper shock absorber mount.
  2. Remove the wheel.
  3. Remove the upper shock nut, washer and bushing.
  4. Remove the lower mounting bolt(s) and remove the shock from the vehicle.
  5. Install the shock absorber in the vehicle and loosely tighten the upper shock absorber nut. Make sure the install the bushings and washers before installing the upper nut.
  6. For 4WD vehicles, install the shock absorber so that the white paint mark at the lower side of the shock absorber faces the outer side of the vehicle. Install the lower shock absorber bolt(s). On 1992-95 Montero torsion bar suspensions, tighten the single lower mounting bolt and nut to 65-76 ft. lbs. (88-103 Nm). On all other vehicles (whether torsion bar or coil spring suspensions), the two lower shock absorber mounting bolts should be tightened only to 7-10 ft. lbs. (9-14 Nm). Fig. 1: Install the shock absorber so that the white mark faces toward the outside of the vehicle - 4WD vehicles, except 1992-95 Monteros 86668006.gif
    Fig. 2: Install the bushings, washers and nuts in the order shown - except 1992-95 Monteros 86668007.gif

  7. On 1992-95 Monteros, tighten the shock absorber installation nut so that the dimensions shown in the illustration ( A and B) are at the standard values. These standard values are: A - 0.04-0.08 in. (1-2mm), B - 0.06-0.10 in. (1.5-2.5mm). WARNING
    When tightening the nut, be careful not to bend the stud pin of the washer assembly.
  8. On all other vehicles, once the lower mounting bolt(s) are tightened, tighten the upper shock absorber mounting nut all the way to the end of the thread on the shock absorber stud, then tighten the locking nut to 9-13 ft. lbs. (12-18 Nm).
  9. Install the wheel.
  10. Lower the vehicle to the ground. Fig. 3: When installing the upper shock nuts on 1992-95 Monteros, make sure measurement A is 0.04-0.08 in. (1-2mm) 86668008.gif
    Fig. 4: When installing the upper shock assembly, make sure its components are positioned as shown - 1992-95 Monteros 86668009.gif
prev.gif next.gif

Nov 03, 2010 | 1987 Mitsubishi Mighty Max

2 Answers

How do you install the alternator


1990-93 Accord
  1. With the ignition OFF, disconnect the negative battery cable.
  2. Remove the power steering pump. Refer to Section 8 for the complete procedure.
  3. Remove the cruise control actuator but do not disconnect the actuator cable; simply move the unit out of the way with the cable attached.
  4. Unplug the multi-pin electrical connector.
  5. Remove the terminal nut and remove the wire from the terminal.
  6. Loosen the adjusting bolt; remove the alternator nut. Fig. 3: Alternator mounting on 1990-93 Accords 86803003.gif

  7. Remove the belt from the alternator pulley.
  8. Remove the adjusting bolt, the lower through-bolt and the small support stay.
  9. Support the alternator. Remove the upper through-bolt and remove the alternator.
  10. If desired, remove the alternator mounting brackets. To install:
  11. If the alternator brackets were removed, reinstall them. Coat the bolts with a thread sealer or liquid thread lock. Install the bracket bolts and tighten them to 36 ft. lbs. (50 Nm).
  12. Fit the alternator into place. Install the upper through-bolt and tighten it to 33 ft. lbs. (45 Nm).
  13. Install the small stay, the lower through-bolt and the adjusting bolt. Make certain the adjusting bolt is properly installed.
  14. Install the belt. Install the alternator nut. Adjust the belt tension. Tighten the alternator nut to 19 ft. lbs. (26 Nm).
  15. Connect the wire to the terminal and tighten the nut.
  16. Engage the multi-pin connector to the alternator.
  17. Install the cruise control actuator.
  18. Install the power steering pump.
  19. Connect the negative battery cable.

Oct 18, 2010 | 1992 Honda Accord

1 Answer

Where is the location of the ECM on a 1998 ford explorer?


ECM (Engine Control Module) is the old name to the new PCM
(Powertrain Control Module) denomination; this unit performs many functions on your car. The module accepts information from various engine sensors and computes the required fuel flow rate necessary to maintain the correct amount of air/fuel ratio throughout the entire engine operational range.

Based on the information that is received and programmed into the PCM's memory, the PCM generates output signals to control relays, actuators and solenoids.

The module is mounted under the hood on the firewall. On 493-94 models, it is mounted low on the firewall, near the left-hand fender (drivers side). On 495-99 models, it is mounted high on the firewall offset to the right-hand side of center.

bb3c007.jpg

Exploded view of the firewall PCM mounting for 493-94 models


15b7ff3.jpg

Exploded view of the firewall PCM mounting for 495-99 models

  1. Disconnect the negative battery cable.
  2. Disengage the wiring harness connector from the PCM by loosening the connector retaining bolt, then pulling the connector from the module.
  3. Remove the two nuts and the PCM cover.
  4. Remove the PCM from the bracket by pulling the unit outward.
To install:
  1. Install the PCM in the mounting bracket.
  2. Install the PCM cover and tighten the two nuts.
  3. Attach the wiring harness connector to the module, then tighten the connector retaining bolt.
  4. Connect the negative battery cable.

Hope helps (remember comment and rated this).


Jul 31, 2010 | 1998 Ford Explorer

4 Answers

I've just replaced the rotors and brake pads on both front tires and I felt the wheels feel whobbly. Anyone knows why? Thanks.


the wobble you referred to many be the front wheel bearings.
jack the front end of the astro up and wiggle the front tires.

if they wobble or there is a lot of movement check the front
wheel bearings on both sides. they are inexpensive.

Dec 11, 2009 | 2000 Subaru Impreza

1 Answer

How do i cahnge the starter in a 1994 cadillac sedan deville 4.9L


1994 Cadillac Deville 4.9L SFI 8cyl

Removal & installation - 4.5L and 4.9L Engines
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle securely on jackstands.
  3. Remove the starter motor shield.
  4. Remove the exhaust front and rear pipe assembly.
  5. Remove the flexplate inspection cover.
  6. Disconnect the solenoid 'S' terminal nut and battery cable nut.
  7. Unbolt the starter motor mounting bolts, and remove the starter motor.
31c39b0.jpg


Fig. Typical starter mounting on early models


680d011.jpg

Fig. Later model starter location and mounting on the 4.9L engine


a8c1a11.jpg
Fig. Starter mounting on 4.5L engine with a starter shield


To install:
  1. Install the starter motor, and tighten to 32 ft. lbs. (43 Nm).
  2. Install the solenoid 'S' terminal nut. Tighten the nut to 35 inch lbs. (4 Nm).
  3. Install the battery cable nut and tighten to 12 ft. lbs. (15 Nm).
  4. Install the flexplate inspection cover, the front and rear exhaust pipe assembly and the starter motor shield.
  5. Lower the vehicle.
  6. Connect the negative battery cable.

I hope help you with this (remember rated this help). Have a nice day, good luck.

Sep 24, 2009 | 1994 Cadillac DeVille

1 Answer

Front motor mount on 1993 camry 4 cylinder


The mount is probably bad anyhow. so get it out however you need to, you can always cut the nut or bolt off and the new mount will have a new stud. so you will only need a nut.

Sep 23, 2009 | 1992 Toyota Camry V6

1 Answer

How to replace alternator on 98 chevy metro 4 cylinder


  1. Disconnect the negative (-) battery cable. CAUTION: Failure to observe Step 1 may result in a serious personal injury. It a tool is shorted at the generator lead, the tool will become hot enough to cause a serious burn .
  2. Remove the air cleaner assembly.
  3. Remove the rubber protector, the nut and the electrical connector from the generator B terminal.
  4. Remove the upper mounting bolt (1).
  5. Remove the drive belt.
  6. Remove the 2 lower generator mounting bolts.
  7. Remove the generator.
    1. Install the generator.
    2. Install the 2 lower mounting bolts finger-tight.
    3. Install the upper mounting bolt (1) finger-tight.
      1. Install the drive belt.
        • Adjust the drive belt to obtain a 68 mm (0.24-0.31 in) deflection with 10 kg (22 lbs) pressure exerted when reinstalling a used belt.
        • Adjust the drive belt to obtain a 5-7 mm (0.20-0.27 in) deflection with 10 kg (22 lbs) pressure exerted when reinstalling a new belt.
      1. Tighten the generator upper mounting bolt. NOTE : Refer to Fastener Notice in Cautions and Notices. Tighten Tighten the generator upper mounting bolt to 23 N.m (17 lb ft) .
      2. Tighten the generator lower mounting bolts.
      Tighten
      Tighten the generator lower mounting bolts to 23 N.m (17 lb ft) .
      1. Connect the electrical connector to the generator B terminal. Secure the connector with one nut and the rubber protector. Tighten Tighten the electrical connector nut to 8 N.m (71 lb in) .
      2. Install the air cleaner assembly.
      3. Connect the negative (-) battery cable. Tighten Tighten the negative (-) battery cable to 15 N.m (11 lb ft) .

Nov 18, 2008 | 1998 Chevrolet Metro

1 Answer

Steering wheel


there is a cover on the bottom of the steering wheel.pop that open and there will be a 7mm bolt if it's loose just tighten it.turn to the right.if it is that style if not there will be a plug on each side on the back and two 8mm bolts

Jun 14, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...