Question about Toyota Camry

1 Answer

05 camry is misfiring in one of the cylinders under load, replaced spark plugs, problem still remails

2005 Camry with 4 cylinder engine and manual transmission

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 11,022 Answers

Could be a bad fuel injector ! Videos on youtube showing how to test .

Posted on Jan 01, 2017

  • Jeff Armer Jan 01, 2017

    Does this have coil on plug ignition system ? could be a coil breaking down internally

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Toyota camry with codes obd codes p0300 - p0306 and p0354?


The car needs carlibration,the code means random cylinder misfire.fuel line need and MAF need check

Sep 05, 2014 | 2007 Toyota Camry

1 Answer

What is the cylinder order for a 4 cylinder toyota camry


It is 1-3-4-2 with No 1 being at the timing belt and crank pulley end.

Jun 09, 2014 | 2001 Toyota Camry

1 Answer

1994 toyota camry 3.0 engine misfiring 1,3,5 cyls.


cylinders 135 are on rear off engine by fire wall, does your car have all coils or only front three, if this is the case, if no oil found into spark plug tube try replacing wires first, if oil in them replace valve cover gaskets and gromets, dont forget a fresh set of wires.

Jul 21, 2013 | 1994 Toyota Camry

1 Answer

I cannot find the spark plugs on my camry !!!


First, you didn't mention which engine your 1994 Toyota Camry is equipped with. (This is really MUST-KNOW information if you want help with fixing your car.) There is a 3.0L V-6 engine and a 2.2L 4-Cylinder engine. Two TOTALLY different animals! I'll just take the extra time to answer for BOTH of them....

If your Camry is equipped with a 3.0L V-6 engine, You cannot find the spark plug wires because there are none, That engine is equipped with Coil On Plug (COP) ignition. The coils on the left bank (the side of the engine near the radiator) are located under the plastic cover on top of the engine. The coils for the right bank (the side of the engine near the firewall) are located under the upper intake plenum. The plenum MUST be removed to access them. (this is also required to replace the spark plugs.)

If you have the 2.2L 4-cylinder engine, the wires run down the center of the valve cover and the boots go down through the valve cover to the plugs. The other end of the wires attach to the distributor cap at the rear (drivers side) of the engine.

Jul 25, 2011 | 1994 Toyota Camry

1 Answer

1998 Toyota Camry XLE 3.O liter - sometime misfires, according to Advance it the # 4 cylinder.


Run your vehicle with the hood open at night in a dark place with the headlights off. Look at the spark plug wires to see if spark is jumping out onto your chassis. If you have the long tubular boots, remove the one going to #4 cylinder and see if spark jumps to chassis through the side wall of boot. If so, replace the wire. It also could be the #4 post on your distributor. It's part of the cap assembly and they are usually pretty cheap to replace. Replace rotor button when replacing cap. The rotor button is usually less than 5 bucks.

Nov 23, 2010 | 1998 Toyota Camry

1 Answer

Have 2005 lincoln aviator - has miss at 30-55 MPH - no codes replaced all coils ( ford) & spark plugs (twice) - repair vacuum leak at PCV Still misses -- no codes -- help


The COPS (coils) may have shorted the drivers in the PCM (computer). You should get a misfire code for each cylinder misfiring though.

Slim possibility, but very expensive unless you have a service contract.
LINCOLN: 1999-2004 Navigator
2002-2003 Blackwood
2003-2005 Aviator MERCURY: 2003-2004 Marauder
ISSUE: Some 1999-2004 Navigator, 2002-2003 Blackwood, 2003-2005 Aviator, 2003-2004 Marauder and 2003-2004 Mustang vehicles built before 12/19/2004 equipped with 4.6L 4V/5.4 4V engine may exhibit a runs rough, lacks power, and engine misfire, prompted by a MIL light and DTC codes P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, and P0316.
ACTION: Diagnose engine for engine misfire concern. If diagnostics determine an engine misfire which is characterized by leakage through exhaust valve(s), only replace the affected cylinder head(s).
SERVICE PROCEDURE FOR VEHICLES WITH RUNS ROUGH/MISFIRE CONDITION:
  1. Perform relative compression check on all cylinders. If abnormal, check cylinder leakage and actual compression for "low" cylinders refer to Workshop Manual (WSM), Section 303-00.
  2. If leakage/compression check indicates a valve train concern, per valve train diagnostics in WSM, Section 303-00, replace cylinder head and cam assembly, pipe plugs and timing chain tensioner, per procedure outlined in WSM, Section 303-01.
  3. If cylinder leakage and compression tests are inconclusive, perform misfire diagnostic, per TSB 05-22-8. NOTE: DO NOT TRANSFER SPARK PLUGS. INSTALL NEW SPARK PLUGS IN REPLACEMENT CYLINDER HEAD AND CAM ASSEMBLY. NOTE: THE ENGINE MISFIRE CONCERN IS TYPICALLY EXHIBITED ON THE LEFT HAND CYLINDER HEAD AND RARELY ON THE RIGHT HAND CYLINDER HEAD. UNLESS CONFIRMED, THE RIGHT HAND CYLINDER HEAD SHOULD NOT BE REPLACED AS AN "EXTRA MEASURE" SERVICE PRECAUTION. NOTE: THE REPLACEMENT CYLINDER HEAD WILL NOT IMPROVE OR REDUCE ENGINE HORSEPOWER OR TORQUE ABOVE ADVERTISED LEVELS.

Sep 24, 2010 | 2003 Lincoln Aviator

2 Answers

My car is misfiring around the 3rd cylinder, where is the 3rd cylinder?


The third cylinder is the third spark plug wire from the passenger side of the car. An easy way to tell if this is the cylinder that is misfiring is to pull up the spark plug wire using insulated pliers with the car running. If there is no change in idle speed then that's the dead cylinder. If when you pull out the spark plug wire you see sparks shooting all over from it (a very common problem) then you need a tune-up.

Oct 23, 2009 | 1998 Toyota Camry

1 Answer

Timing belt 2005 4 cylinder camry


Hello, A 2005 Camry with a 2.4 4 cylinder engine has a timing CHAIN not belt. I don't think that there is a routine maintenance schedule for this. If there is no audible noise coming from the chain area, you probably have nothing to worry about.
I hope this helps
CYA, Gator241

Feb 09, 2009 | 2005 Toyota Camry Solara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...