Question about 2003 Dodge Durango
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey-I have has this before different car but same - idle control valve is failing - computer at shop will pick this up on diagnostic
Posted on Oct 12, 2008
SOURCE: 2000 Dodge Durango Won't Start
You might want to Check electronic sensors, like would you start with the idle control sensors.Also Try tot urn the ignition key to the point just before the engine starts to turn over And leave the key in the that position. If the fuel pump is located inside the gas tank,remove the gas cap & listen for a "whirring" sound. This sound means your electronic pumping is working.
Posted on Nov 19, 2008
SOURCE: 2000 dodge durango
hey, im a usa sailor and i have also encountered this problem. how i fixed it.....,
you may be missing a little rod that attatches the handle from the cab to the crankcase. if you have that rod then see if the holes in the levers under the truck have little rubber grommets. these are what holds the rods in place.
if missing :
the rod......contact your nearest auto parts store preferably napa or autozone usually runs about thirty bucks at most
the rubber grommets.......usually any hardware store will have these for only four bucks
Posted on Feb 26, 2009
the speed sensor for this vehicle is actually in the rear differential of the vehicle. this is the sensor that runs the speedometer also known as the vehicle speed sensor. there are also two speed sensors in the front one on each wheel known as wheel speed sensors these are for the abs system only
Posted on May 17, 2009
When engine running, ensure no engine combustion gas bubbles in coolant resevoir (if so, the head gasket is blown).
Check cooling fans are operating ok (when required when car warms up), if not check
2) relay operation,
3) heat sensor switch.
When re-filling cooling system, bleed off any airlock as necessary.
Check for collapsing (soft) coolant hose on suction side of waterpump when engine revs above idle.
Posted on Sep 01, 2009
Tips for a great answer:
Dec 21, 2015 | 1999 Dodge Durango
Jan 06, 2014 | 1998 Dodge Durango
Mar 29, 2013 | 2000 Dodge Durango
Jan 01, 2013 | 2002 Dodge Durango
Feb 14, 2010 | 2003 Dodge Durango
Apr 21, 2009 | 2000 Dodge Durango
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: