Question about Cars & Trucks

Open Question

My Duracell 500 clicks out when I go to high beam --- it ran perfectly when I checked batteries --- it did not work after that ???

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: headlights, low beam works fine but no high beam,

might not be. high beam is directly connected and controlled by the switch in the steering column. that would be a great place to start trouble shooting. i have found a lot of problems from contacts over heating and melting the plstic holders on those switches.

tnx 4 using fixya,

drcool

Posted on Oct 27, 2008

Ad
lexxxis
  • 21 Answers

SOURCE: High beams dont work...Checked fuses

you may need to replace the blinker module in the steering column , i cant see it being the bulbs themselves you can check them over as well

Posted on Apr 13, 2009

isaid
  • 302 Answers

SOURCE: Low beams only quit high beams work, park lights

yes there is but it is probably da bulbs

Posted on Oct 06, 2009

  • 7353 Answers

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Posted on Nov 04, 2009

Testimonial: "spot on."

  • 3 Answers

SOURCE: low beam not working but high beam is-Pontiac Vibe 2005

I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Ford Falcon 2005 low beam headlights aren't working, however the high beams and park lights work fine. Please help.


The relays are next to your battery. The first one is the horn relay (the yellow one closest to the headlight), then the lo and high beams after that, I forgot which order, and then the starter relay.

Get a freind to check which one clicks when you turn on the high beams (put your finger on it), and swap it over with the one next to it.

Check to see if the headlights work, but the high beams not. If this is the case, the relay is fried. If the high beams are still not working, then check the contacts in the combination switch (on the steering column), or the wiring... this is a bit more difficult to trace, none the less, not that difficult.

Dec 28, 2016 | 2005 Ford Falcon

2 Answers

How do I fix HI beam headlights?


your switch is not good try to double check your switch.

Mar 09, 2015 | Kia Spectra Cars & Trucks

1 Answer

1998 ford ranger low beams work high beams do not


if the high beams bulb filaments are good then it could be the dimmer switch is not working. you should hear a click when activating the switch. if not then check to make sure the rod that pushes on the switch is moving far enough to activate. if not adjust switch. if it is clicking the switch is probably bad.

Sep 24, 2014 | Cars & Trucks

1 Answer

Had loose battery terminal, fixed it but now the high beams don't work


there is a relay for high beams try that it should be under the hood if you have fuse box under hood good luck

Dec 11, 2013 | Cars & Trucks

1 Answer

1994 pontiac grand am high beams work but no low beams, possible relay issue?


Sounds like it's in the actuator itself - the part that you move on the steering wheel or dash to put the high beams on or the headlight switch itself.. Find the ground wire on the headlights and run a new wire from that directly to the body somewhere so it gets a good ground, or directly to the neg side of the battery.

Oct 09, 2017 | Pontiac Cars & Trucks

3 Answers

Low beam not working but high beam is-Pontiac Vibe 2005


I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Jan 15, 2010 | 2006 Pontiac Vibe

1 Answer

No high beams on a 99 chevy


look under your hood for the fuse/relay box will be on left side behind battery. the relay and fuses will be in there check fuses also

Aug 28, 2008 | 1999 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...