Question about Cars & Trucks

Open Question

My 40l engel has the light on but is not running. I have checked the fuse and seems ok. It was running normal and then stopped.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76848 Answers

SOURCE: my indicators and hazard warning

I think there is an issue with turn signal switch, test the leads at the switch that are supposed to have power, if they are ok replace the switch. An inexpensive test light will do nicely for these checks.

Posted on Aug 21, 2008

Ad
  • 98 Answers

SOURCE: stop lights not working

Well, if the fuse and bulbs are still good, and you're getting all of the rest of your lights to come on, chances are your brake light switch is bad. They're most always located at the very top of the brake pedal. Sometimes it's necessary to remove the lower portion of your dash cover to access it, but once you gain access, you can check it by putting a voltage meter on the wires going to it and pressing down on the brake pedal while reading the meter. That way, if it's not bad, you don't actually have to remove it. If you don't get voltage when applying pressure to the brake pedal however, you can count on having to replace it, which should be rather inexpensive at your local parts store. Hope this sheds some (brake) light on your problem. Have a great evening!

Posted on Nov 23, 2008

  • 1986 Answers

SOURCE: plugged in a trailer and now brake lights and horn don't work

There definitely should be a fuse for your brake lights. It should be inside the car fuse box, but sometimes it'll be under the hood (very rare). There's also a switch above the brake pedal that turns your brake lights on. This switch may be faulty

Posted on Aug 25, 2009

Armytech
  • 47 Answers

SOURCE: Daytime running lights stopped working,

You may have a problem with the daytime headlight relay, or a headlight swith malfunction.

Posted on Oct 07, 2010

  • 4 Answers

SOURCE: brake light switch has been replaced. stop fuse

Check whether 12 volt input is coming to brake switch connector 12 volt input is require to on brake light you can check with 12 volt bulb.

Posted on Nov 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights not working


Inspect wiring and contacts...cud bebad ground. Mite b a module prob

Jan 25, 2016 | 2002 GMC Envoy

1 Answer

No tail lights


Your year--make--model didn't post for some reason? That info would be helpful, to check wiring.
I'd probably check voltage and ground at the bulb socket.

Jan 25, 2016 | Cars & Trucks

1 Answer

2004 Tacoma - tail lights don't work but brake lights and reverse lights do work. Bulbs look ok. fuse looks okay. Wiring looks ok. Could it be a relay or is there something else to check? Than


try cheaking the light switch its self may be faulty not normally a relay for but it shold tell you on fuse box which relay runs light ign ect

Sep 21, 2012 | 2007 Toyota Tacoma

1 Answer

I have a 2003 ford F150 and I bought a factory plug in trailer harnes but the only light that work now is the running light I got back under truck and tried the harnes with a tester and it seem the trailer...


The fuses for the trailer tow adapter are in the normal fuse panels.

Engine Compartment fuse panel
101 - Is the battery charge circuit ( hot in run position )
20 - Left Stop / Turn fuse
19 - Right Stop / Turn
5 - Trailer tow reversing lamps & Trailer Tow parking lamps

Cab Fuse Panel
23 - fuse for the relay for the trailer tow battery charge circuit

All of these are in the owners manual

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Oct 04, 2010 | 2005 Ford F-150

2 Answers

Rear brake light are not working checked fuse under hood and passenger side dash could not find fuse by brake pedal


It could possibly be the actual switch that sits behind the break pedal. When the break pedal depresses or presses into the switch, the break lights go on or off. Not sure how much they run, but really easy to change. You could also check the switch with an ohm meter if available by making sure it breaks or runs continuity through the terminals when the switch is pressed/released. Hope this helps. Good luck!

Mar 12, 2010 | 1993 Jeep Grand Cherokee

2 Answers

Chevy cavalier 1998 2.4 ltthe motor starts but sudenly stops after 10 or 20 seconds running i cheked the gas pump line and it works ok, spark plugs are ok fuses oare ok the swuitch ignition seems to be in...


the fuel pump is triggered by the engines oil pressure switch upon starting
when oil pressure reaches normal psi the relay takes over powering the fuel pump
you see know that your relay is not operating now for the pump

Mar 07, 2010 | 1998 Chevrolet Cavalier

1 Answer

Plugged in a trailer and now brake lights and horn don't work


There definitely should be a fuse for your brake lights. It should be inside the car fuse box, but sometimes it'll be under the hood (very rare). There's also a switch above the brake pedal that turns your brake lights on. This switch may be faulty

Aug 25, 2009 | 2005 Mazda 3

1 Answer

2004 ford ranger stopped running today started


Have your altenator checked. Sounds like it trying to stop charging. May be internal votage regulator.

Jun 27, 2009 | Ford Ranger Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...