Question about Proton Cars & Trucks

1 Answer

Having trouble with my Proton Jumbuck ute. The battery has a drain of 0.10A. I have isolated the room light and clock the drain is still 0.10A. Are there any other circuits that come off this fuse?

When 10A fuse for the room light and clock are removed, the drain is 0.02A.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Proton Master
  • 5,252 Answers

0.10 amps is only 100 milliamps, and that is not enough to drain a battery. In fact, if your Ute has an engine computer, that may account for the amp draw. I'm not familiar with this car, as it is not sold in the US as that name. On some US cars, that circuit would be known as IOD (ignition off draw), and specifically for clock, radio pre sets, computer memory, and security parts if used. It is said as long as the amp draw is less than 150 milliamps (0.150A), everything is fine.
So, probably the engine computer, or radio pre-sets, or security apparatus, hey?

Posted on Jan 01, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the horn located on my proton jumbuck please?


horns are always located to the left or right of the front grill and just in front of the radiator.

Aug 14, 2016 | Proton Cars & Trucks

1 Answer

I own a 2003 proton jumbuck ute and want to replace drive shafts, the outer wheel end not a problem but need to know what I have to do to release drive shafts from gearbox end. thank you for your time


most cv axles or held in the gear box /diff by a round sectioned circlip at the end of the splines in the diff
once you have the axle free of the hub and bearings use a heavy hammer on the back side of the cv joint or a heavy slide hammer attached to the end of the axle
you have to compress that circlip so that it allows the axles to slide out

May 30, 2016 | 2003 Proton Juara

1 Answer

Turn off engine light on proton jumbuck


fix the fault and use a scanner to reset the system

Feb 27, 2015 | Proton Cars & Trucks

1 Answer

2005 Proton Jumbuck engine warning light has come on ( emission control system? ) all oil levels OK


in alot of vehicles the oxygen sensors go bad first in the emmission circuitry you can use a obd2 scanner to get code normally auto store will recover the code and practically tell you what it needs for free.

Feb 15, 2015 | Proton Cars & Trucks

1 Answer

FIRING ORDER PROTON JUMBUCK


If it's 4 cylinders, it's 1-3-4-2. for Mitsubishi/Proton engines.

Jun 22, 2013 | Proton Cars & Trucks

1 Answer

Proton Jumbuck Hazard Indicator lights not working.


may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: diyobd2.fr

Mar 08, 2013 | Cars & Trucks

1 Answer

I am having a constant draw killing my battery the draw stops when i pull both the tcb 10 amp fuse and the atc 20 amp fuse and the altranator charge wire i know the alt is bad what do the fuses run


ATC, auto traction control. this is to maintain stability during slippage. you may have a closed sensor circuit that is continuing to drain power when the ignition switch is in the off position. Tcb is a module fuse. I would preform the test below to isolate any other draws that may exist.


Here is the procedure I use to isolate a battery drain. Remove negative battery cable from the battery. Using a 12-volt test light, hook one end to the negative battery post the other end to the negative battery cable you just disconnected. The test light will glow or "light" if there is a drain. If the "light or glow" is faint, that is probably normal draw for the clock or computer. If the "light or glow" is bright, then there is a large drain. That should be corrected. Now start removing and replacing the fuses one by one until the light goes out; that one will be the circuit with the drain. Remember to hold in the button in the door jam for the interior lights.

Sep 23, 2009 | 1998 Oldsmobile Bravada

1 Answer

Proton jumbuck electrical fault on the centrail locking and immobilisa when key is pressed the light on the key glows but nothing happens


I had a similar problem with my jumbuck,2 sets of keys only one worked. Replaced battery now ok.CR2032 ,tednanango

Oct 29, 2008 | Kia Amanti Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proton Experts

David Harrelson
David Harrelson

Level 3 Expert

5309 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Audrey Messer
Audrey Messer

Level 2 Expert

176 Answers

Are you a Proton Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...