Question about 1984 Ford Bronco

Open Question

HOW do I remove the arm rest on a ford bronco 1984, no zipper to access

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 27 Answers

SOURCE: Rocker Arms

17-23 Ft/Lbs.

Posted on Jun 18, 2008

  • 1 Answer

SOURCE: 1984 ford bronco 2

could be many things like a bad connection to the coil. bad ground. bad wire. even a bad coil. use a dvom and test 12V current going into the coil. it could be bad points in the cap and rotor.

Posted on Jan 11, 2009

michigan man
  • 3533 Answers

SOURCE: arm rest

normally there is a pressure spring and by pushing in on the armrest it will come out but you have to get it in the right position but if you don't understand what I am saying if there is a car upholstery shop or a trim shop they can also assist you with this

Posted on Jan 12, 2009

tneubauer
  • 437 Answers

SOURCE: i need to remove the arm-rest on my ford 2001 windstar

Right from the Ford manual

Posted on Jun 08, 2009

cvstan
  • 40 Answers

SOURCE: what is the firing order for a 1984 ford bronco 2

1-4-2-5-3-6
Now you need to know which cylinder is which. If you stand at the front of the truck looking at the engine, the number 1 cylinder is on the left closest to you. The left bank has cylinders 1-3-5 and the right bank has 2-4-6. So number 1 is at the left front and number 6 is at the right rear.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove an armrest on a 1984 Ford Bronco?


Pull the armrest vertically up. There is a slot in the armrest and a pin on the frame. You have to match these to pull the armrest off. Without a zipper it's a little more challenging. Some armrest have a little screw that keeps the armrest on the frame. The older models usually worked with the slot and pin.

Dec 31, 2016 | 1984 Ford Bronco

1 Answer

How to change a flywheel on a 84 bronco 2 standard transmition


is the flywheel worn out or just the ring gear, (starter gear)
first remove the trans mission then unbolt the flywheel, and replace
if only replacing the starter ring gear, use a soft hammer and bump it as you rotate the flywheel until it comes off, if the back side looks good heat it in the oven to 350 degrees and with gloves on run out and put it on the flywheel, it will go on easily, just hold it all the way on against the edge it rests on and turn it about 1/3 turn and hold for about 15 seconds and that's it, it will not come off unless you beat it off again

Mar 23, 2015 | 1984 Ford Bronco II

1 Answer

How do I remove the arm rest hinge


I believe it takes a T-50 torx bit or close to that. If its what I recall the arm rest cover has a zipper or velcro near hinge end. Open that up and look at the cavity that the bolt is in and go from there.

Good luck!

Nov 26, 2014 | 2005 Ford Explorer

1 Answer

How to install suspension bushes 1984 ford bronco 4x4


If you have leaf springs jack the truck and remove shackle plates and bushes. If you have coil springs remove the bars and the bushes may have to be pressed in and out.. If you have independent suspension you will have to remove the arms and press the bushes in and out.

Apr 01, 2013 | Cars & Trucks

1 Answer

How do I check the trans fluid in my 1984 ford bronco II 4x4 with automatic transmission


I use and I'd recommend you register for free at www.autozone.com Once registered you'll have access to repair and shop manuals for virtually any car or truck. All the data and diagrams you need now or may need in the future will be a couple of mouse clicks away.

Jul 19, 2011 | 1984 Ford Bronco II

1 Answer

I'm trying to replace the power window motor on the passenger side in my '91 Ford Bronco. I've removed the door panel, but how do I get the rest off??


you have to take off the arm to get the motor off... normally its four bolts holding it on... two at the top and two at the bottom. you also may need to take the window off the track.

Nov 13, 2010 | 1991 Ford Bronco

2 Answers

The arm rest does not move to a parallel position


Un zip the cover on the armrest and pull it up to expose the bolt hole. unbolt and remove the arm rest and see what parts are damaged, sometimes it can just be tightened.

Feb 12, 2010 | 1990 Ford Bronco

1 Answer

How do you remove the armrest on the front seats?


The armrests have covers that can be removed. Locate the zipper on the arm rest. Once you unzip it pull it toward the back of the arm rest and this will expose the one bolt that hold the armrest on. You will need a large torx and rachet to get it off. Once you take out that bolt the armrest will come right off.

Feb 02, 2010 | 1995 Ford Bronco

4 Answers

What is the firing order for a 1984 ford bronco 2


1-4-2-5-3-6
Now you need to know which cylinder is which. If you stand at the front of the truck looking at the engine, the number 1 cylinder is on the left closest to you. The left bank has cylinders 1-3-5 and the right bank has 2-4-6. So number 1 is at the left front and number 6 is at the right rear.

Jan 25, 2010 | 1984 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...