Question about 2006 Mercury Milan

Open Question

Locked keys on trunk of 2009 Mercury Milan - 2006 Mercury Milan

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

greg_margo
  • 1959 Answers

SOURCE: how to get into trunk w/o keys and trunk opener. Keys are locked in trunk and button inside car is locked.

Using your keyless entry on the keypad, press the 5 digit code to get into the door and press the 6 key immediately after. Lincoln has several codes in addition to the 5 digit keyless entry like pressing the 3 to open all the doors, the 6 for the trunk and pressing the last 2 buttons at the same time to lock the doors.

Posted on Apr 29, 2009

  • 5 Answers

SOURCE: Keys locked in trunk need to get in

do the back seats recline?

Posted on Jun 27, 2009

  • 327 Answers

SOURCE: Locked my keys in the trunk of a 2009 hyundai elantra

if the car has a fold down back seat fold it down and try to reach in the trunk there should be a safety pull to open it or if you can reach the keys you are done ! if it does not have a fold down seat the fastest and safest way is call a locksmith or AAA if you have the service you dont want to start using a coat hanger or a slimjim on that car you could break the plastic clips that hold the linkage rods in place in the door and do some damage to the car . hope this helps

Posted on Jul 25, 2010

  • 60 Answers

SOURCE: 2006 Mercury Milan key stuck in ignition.

There's a TSB published by ford for this condition. It's caused by a binding shifter button.


adobe.gif Printable View (73 KB) TSB
07-14-7

  • KEY STUCK IN IGNITION / SHIFTER BINDING CONDITION
Publication Date: July 6, 2007
FORD: 2006-2007 Fusion LINCOLN: 2006 Zephyr MERCURY: 2006-2007 Milan
This article supersedes TSB 07-2-1 to update the Part List. ISSUE: Some 2006-2007 Fusion, Milan and 2006 Zephyr vehicles built before 9/4/2006 may exhibit a customer concern of the ignition key getting trapped or a shifter slider binding condition. Most of the key trapped conditions are caused due to a binding shifter button which does not allow the pawl to contact the park detect switch.
ACTION: Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE If the key will not release from the ignition cylinder lock follow the Key Trapped procedure. On vehicles with a hard-to-shift shift lever into park or slider bunching/binding then follow the Shifter Slider Binding procedure. Key Trapped:
  1. Actuate knob button 5-10 times, observe for binding or sticky condition.
  2. Replace knob assembly if the knob sticks following Workshop Manual (WSM), Section 307-05. NOTE: WHEN REPLACING THE SHIFT KNOB DO NOT REUSE THE SCREWS. REMOVE AND DISCARD THE SCREWS. INSTALL TWO NEW SCREWS AND TIGHTEN TO 18 LB-IN (2 N-m). DO NOT OVER TIGHTEN THE SCREWS OR DAMAGE MAY OCCUR.
Shifter Slider Binding:
  1. If shifter slider is bunched up or binding, replace bezel assembly following WSM, Section 307-05. NOTE: WHEN REPLACING THE BEZEL, CARE NEEDS TO BE TAKEN TO ENSURE THAT THE BRAKE SHIFT INTERLOCK OVERRIDE TAB IS PROPERLY ALIGNED INTO ITS GUIDE. REFER TO FIGURE 1.

    tb8706a.gif
    Figure 1 - Article 07-14-7

    NOTE: WHEN REINSTALLING THE SHIFT KNOB DO NOT REUSE THE SCREWS. REMOVE AND DISCARD THE SCREWS. INSTALL TWO NEW SCREWS AND TIGHTEN TO 18 LB-IN (2 N-m). DO NOT OVER TIGHTEN THE SCREWS OR DAMAGE MAY OCCUR. NOTE: IF OVERRIDE CAP IS DAMAGED DURING REPAIR, IT IS AVAILABLE SEPARATELY.

PART NUMBER PART NAME 6E5Z-7D443-B Bezel Asy-Black w/FNR5 Trans (Fusion-Milan) 6E5Z-7D443-C Bezel Asy-Black w/Aisin F21 Trans (Fusion-Milan) 6H6Z-7D443-A Bezel Asy-Satin Nickel (Zephyr) 6E5Z-7213-C Knob Asy-Black (Fusion-Milan) 6H6Z-7213-A Knob Asy-Charcoal (Zephyr) 6H6Z-7213-B Knob Asy-Charcoal-OD (Zephyr) 6E5Z-7A214-B Override Cap-Black (Fusion-Milan) 6H6Z-7A214-A Override Cap-Satin Nickel (Zephyr) W790088-S901 Screw (2 Req)
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME 071407A 2006-2007 Fusion, Milan And 2006 Zephyr: Replace Knob Assembly, Includes Time To Diagnose And Verify Repair (Do Not Use With 04536A, 04536B, 7213A) 0.3 Hr. 071407B 2006-2007 Fusion, Milan and 2006 Zephyr: Replace Bezel Assembly Includes Time To Diagnose And Verify Repair (Do Not Use With 04536A, 04536B, 7213A) 0.4 Hr.
DEALER CODING BASIC PART NO. CONDITION CODE 7213 69

NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do not assume that a condition described affects your car or truck. Contact a Ford, Lincoln, or Mercury dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supercede this information with updates. The most recent information is available through Ford Motor Company's on-line technical resources.

Copyright © 2007 Ford Motor Company
2010&c18=non-tab%20view&c21=07-14-07&c35=tsb%2c07-14-07&s=1366x768&c=32&j=1.3&v=y&k=y&bw=778&bh=347&ct=lan&hp=n&[aqe]

Posted on Mar 08, 2011

  • 74 Answers

SOURCE: i locked my keys in

I did this once myself to my 1989 crown vic. There should be 2 bolts on the back seat (follow the seat belt down, you'll feel them.) Take off the nuts from each side and the backrest of the entire seat pulls up and out. you should be able to see clearly into the trunk, grab a flashlight and hopefully hook your keys pulling them out.

Another possibility is the trunk open button in the glove box should you be so equipped, but it may require power to open, the crown vic would not release unless the car was on, but it could be worth a try.

Posted on Jun 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mercury 2008 milan and my rear passenger brake just locked up, what can i do to fix problem


Pull the wheel off and inspect the brake, it could have a defective caliper piston, the other issue can be a defective Antilock brake system hydraulic control valve.

Sep 19, 2016 | 2008 Mercury Milan

1 Answer

Key stuck in ignition in park. Check charging system comes on. Dealership says it might be a fuse.


Key Stuck in Ford Fusion (2006 model) - YouTube

? 1:21
https://www.youtube.com/watch?v=3LVQttFOzGA
Jun 18, 2014 - Uploaded by Jessica East
#Ford #Fusion #Key #ignition #Stuck #FordFusion2006. ... i have a 2006 mercury milan and my key got stuck in there last night,... it to park with a little bit of force. will see what happens next time. good video, nice to know.

Key Stuck in Ignition While in Park

www.2carpros.com/.../2007-ford-fusion-key-stuck-ignition-while-park
Dec 16, 2012 - KEY STUCK IN IGNITION / SHIFTER BINDING CONDITION FORD:2006-2007 Fusion LINCOLN: 2006 Zephyr MERCURY: 2006-2007 Milan

Nov 06, 2015 | 2006 Mercury Milan

1 Answer

Why do I hear a strange vibrating noise in the trunk when I try to open it, it happen's either with inside button or remote


Your trunk release uses a solenoid to power the release switch...a noise is common when engaging this...is this a new noise, or just noticed?

Mar 28, 2015 | 2006 Mercury Milan

1 Answer

Speed sensor shaft transmission


Sorry you will have to consult the dealer for the services of the nerdy looking one with the laptop under his arm on this ,suspect a fault with electricals if this is a auto version ,well its a american so it must be a auto as they dont have proper instructors who can teach students how to drive a manual vehicle .Do love winding up my american cousins over this but the fact is its a 2009 model with more electronics than the apollo moon mission in 69

Oct 18, 2013 | 2009 Mercury Milan

1 Answer

2009 Dodge Charger need to fold down backseat


You have to REMOVE the BACK SEAT to gain access

Apr 10, 2013 | 2009 Dodge Charger SE

1 Answer

Just bought a 2008 Mercury Milan, and would like to know how to set the keyless entry on it. Thanks in Advance. Angie


The owner's manual has some information on this regarding
key programing and such. Did you buy a new key bob? Call
your dealer's service dept. some will tell you how or do it for
free especially if you buy the key bob from them.

Dec 06, 2010 | 2008 Mercury Milan

2 Answers

Locked my keys in the trunk of a 2009 hyundai elantra


if the car has a fold down back seat fold it down and try to reach in the trunk there should be a safety pull to open it or if you can reach the keys you are done ! if it does not have a fold down seat the fastest and safest way is call a locksmith or AAA if you have the service you dont want to start using a coat hanger or a slimjim on that car you could break the plastic clips that hold the linkage rods in place in the door and do some damage to the car . hope this helps

Jul 25, 2010 | 2009 Hyundai Elantra

1 Answer

Turnk problem


try hitting the button again to release the latch or put the key in the trunk cylinder and turn it to open as if you would when trunk is closed

Jul 30, 2009 | 2006 Mercury Milan

Not finding what you are looking for?
2006 Mercury Milan Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...