Question about Cars & Trucks

1 Answer

My wh statesman keeps blowing engine/bcm fuse. using bigger fuse allows it to start but blows again shortly after

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,252 Answers

Don't keep trying bigger fuses. It will only cause more problems, like burnt wiring that will need replacing, or starting a fire.
You either have an electrical component that is shorted and causing too much power draw, or you have some open wire that is shorting to ground by touching metal.
You or an electrician will need to look at a wiring diagram to see what all is on that circuit that is blowing the fuse. Then start taking one part of it loose at a time to try and isolate the problem. See any smoke or smell plastic burning when the fuse pops?

Posted on Dec 31, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

BCM fuse keeps blowing


Sounds like you may have a pinched wiring in the circuit where the fuse supplies power to. Might want to remove all the components that this circuit operates and one by one connect them. Once the fuse pops, you have isolated the circuit and all you need to do is follow the specific wiring to that bad circuit and find the problem.

Dec 18, 2016 | Cars & Trucks

1 Answer

How do i stop a fuse blowing in the interier system in a holden statesman wh v6


the wires will be shorting out maybe to the body of the car. it may be easier to run new wires from the fuse to the visor and then cut old wires than try to trace the old wires under the head lining .

Jun 29, 2016 | Holden Cars & Trucks

1 Answer

What could be causing the front axillary fuse to keep blowing? Even bigger fuses blow.


fuses blow from over current( dead short) they are rated at lower than what is required so that the wire doesn't burn
If you keep putting in bigger fuses without fixing the dead short, eventually the wire will melt the plastic insulation off and the vehicle will burn

Apr 29, 2016 | 2005 Buick Rendezvous

1 Answer

EFI fuses keeps blowing


use and ammeter to find the short.
having the schemetic , in hand allows you to trace which wire
on that fuse (many) has the short.
why not state the name of the fuse.
and engine size.
alldata.com has the schematics.

Jan 11, 2014 | 1990 Toyota 4Runner

2 Answers

1990 new yorker. fuse for the dash lights,radio and dome ligjts keeps blowing


there might be corrosion on the ends of the fuse holder check that or try tuner cleaner before inserting the fuse.could also be a short in the fuse holder.

Sep 05, 2012 | 1990 Chrysler New Yorker

1 Answer

Why does my Fuse keep blowing?


down below the brake master cylinder is the cruise control servo unplug the connector and see if it is corroted leave it unplugged and replace the fuse operate the switches and see if the fuse blows again if not replace the servo i am assuming it is a 2.2L engine as the v-6 has no servo only switches

Aug 17, 2012 | 2000 Saturn L-Series

1 Answer

Fuel injector fuse is blown, keeps blowing. Engine turns but won't catch and start.


if the injector fuse is blown then the car won`t start as its not getting fuel into the motor to fire.if the fuse keeps blowing then you could have an injector/s that is drawing too much or the injector driver in the ecm may not be any good and needs replacing or a used ecm.it could be a short some where in the wiring for the injector system that is going to ground.

Feb 22, 2012 | 1995 Chevrolet Lumina

2 Answers

2009 e250 keeps blowing 10 amp parking fuse then


if it keeps blowing the fuse you have a short in the wiring

Sep 11, 2009 | 2009 Ford Econoline Cargo

1 Answer

Blowing 30 amp engine control fuse.


You say it eventually allows you to put new fuse in, do you mean when it sits for a while, a new fuse won't blow, but if it blows and you immediately replace it, it blows again instantly?

Sep 05, 2008 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...