Question about 1997 Toyota 4Runner

2 Answers

I am replacing the timing chain on a 97 Toyota 4runner with a 16 valve motor, where can I find a diagram or a how to video?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 42,671 Answers

Get a workshop manual from auto parts shops, technical book shops or e-bay
as yadayada says it is the engine that you want so any toyota with that engine will give you the information you need

Posted on Dec 30, 2016

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

YouTube or a Toyota forum ..rifle through the shatty videos on YouTube find a good one that gives u the jist of it...go from there. And remember line up your timing marks properly and MARK them with a finer tip high Vis marker of some sort... and when you take to apart.....put it back together,the same way u took it apart.. it's fairly simple on that vehicle. It's just getting to it...

Posted on Dec 30, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 ford exporer timing issue


There are three engines used in a 97 model. The 4.0 single overhead cam V6 engine uses a timing chain in the front and in the rear, one for each cam. The left side is in the front and the right side is in the back. You would have to take the engine out to access the rear chain.
The 4.0 overhead valve engine and the V8 engine only have one chain in the front.

May 19, 2013 | 1993 Ford Explorer Limited

1 Answer

I need a diagram for a 99 explorer timing chain 4.0 4x4


it needs a special tool from ford the kit is 500 i think. used engine is cheap u can also put a 98 or 97 motor if its cheaper change the valve cover and intake also fly wheel exhaust manifold from the bad motor. i have done it works every time.

Dec 02, 2012 | Cars & Trucks

1 Answer

Timing chain broke, possible damage to heads


Has the timing chain or belt been replaced?? If not you can't check it unless you remove the head(s). If you did bend the valves it is doubtful the engine is destroyed other than needing new valves installed for the bent ones. So the cost would be about $800.00 more if a V6

Jun 20, 2012 | 1992 Toyota 4Runner

1 Answer

Timing Chain Alignment Order for 1993 Toyota 4Runner


There are videos on YouTube on how to replace them, or you want the diagram itself?

May 15, 2012 | 1993 Toyota 4Runner

1 Answer

Timming problems for 88 toyota 4runner


could be the valves try adjusting them and set the timing by crossing over the ignition terminals behind the battry there is a little black box with atop that comes of look in the book for the actual termilal numbers is about 4 of them. hope this helps

Dec 01, 2009 | 1988 Toyota 4Runner

3 Answers

Toyota 4runner timing belt or chain?


60000 or 48 months on belt which is used on the 5VZ-FE motor. The 2RZ-FE and 3RZFE are chain and there is no clear information about changeing them as a maintenence. i hope this helps.

Nov 12, 2009 | 1998 Toyota 4Runner

1 Answer

97 4runner blower motor needs replaced. Do you


Hi. The removal is really easy; unplug the motor under the glovebox, and remove the 3 screws that holds the assembly in. You can have it out in 10 minutes.

Jul 09, 2009 | 1997 Toyota 4Runner

1 Answer

1992 toyota 4runner timing chain replacement?


Best to go to an autoparts store and get a Chilton manual for your truck. It cost about $20.
It's the best bang for the buck when it comes to do-it-yourself research material.
It shows you step by step on how to do it. The book also has pictures, diagrams and drawing.

Apr 17, 2009 | Toyota 4Runner Cars & Trucks

Not finding what you are looking for?
1997 Toyota 4Runner Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...