Question about Dodge Magnum
More then likely the air temperature control blend door is not moving.
Posted on Dec 30, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Heater doesn't blow hot air
First check the coolant level in the radiator. Check your heater core hoses on the firewall underneath the hood. Let the car come up to temp. and feel the two hoses. If only one of them is getting hot you may have bad heater core or a bad heater control valve.
Posted on Jan 05, 2009
If the blower is blowing air just fine, but you cannot control the temperature, you need to listen to air coming from the vents while turning the temperature from hot to cold. If you do n ot hear any change in airflow, then you may a temperature door in the dash broken. this is becoming a common problem on the Equinox and Pontiac Torrent,
Posted on Oct 15, 2009
First of all make sure your anti-freeze is at specification level's as well as make sure With the engine cold start the vehicle remove the radiator cap and make sure you see the flow of anti-freeze while keeping your hands as well as your clothing away from moving parts feel both hoses going into your heater core if the one on top of hot one on the bottom is cold then you have a Clogged heater core in which case you will need to flush the system . a simple garden hose will do the trick simply remove Both hoses to the heater core with the hose at the bottom line apply the garden hose until liquid comes out at the top of the other hose will probably see a lot of gunk. Also ensure that the vacuum line to the round ball under the hood is connected and not dry rotted.this will cause a vacuum leak to not allow the switch to fully engage from cold to hot. I hope this helps you.
Posted on Nov 07, 2009
Have you checked the coolant level? What you describe is exactly what happens if the coolant level is low. When stopped at idle, hot coolant is not circulating through the heater core, so no heat. As the engine increases in rpm's when you pull away from the light, the water pump is spinning quicker, and some coolant is making it to the heater core. So check the level, and if it is low, keep an eye on it to see if it drops again. That of course indicates a leak somewhere. Get it fixed, as overheating the engine leads to costly repairs and worse case a new engine. Let me know how you make out with this.
Posted on Dec 05, 2009
Testimonial: "Thanks Curt! You were right ON!"
Sounds like the temperature blend door actuator may be bad or the vacuum hose to it is disconnected.
Poor Heater System Performance CAUTION
Check all fluid levels and adjust as needed, before operating vehicle for extended periods at idle.
Posted on Nov 19, 2010
Tips for a great answer:
Dec 04, 2015 | Dodge Cars & Trucks
Nov 26, 2013 | 2006 Dodge Charger
Nov 30, 2012 | 2006 Dodge Magnum
Sep 29, 2011 | 2006 Dodge Stratus
Sep 06, 2010 | Dodge Ram 2500 Cars & Trucks
Jan 20, 2010 | 2006 Dodge Ram 2500
Sep 19, 2009 | 2006 Dodge Charger
Jan 04, 2009 | 2003 Dodge Intrepid
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: