Question about Ford Cars & Trucks

1 Answer

2005 ford focus code P0767 shift solenoid D circuit stuck on

O/D light keeps flashing, transmission is shifting rough.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,381 Answers

Possible causes - Low transmission fluid level - Dirty transmission fluid - Faulty shift solenoid 'D' valve - Shift solenoid 'D' valve harness or connectors - Shift solenoid 'D' valve circuit is open or shorted
When the a transmission solenoid is stuck on, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced

Posted on Dec 30, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy malibu damage Light front end damcodend error codes P0401 P0605 P0842 P0642 The 0401 code is being thrown twice and I belive it is the egr wich is common on these cars from what my buddy tells...


DTC P0401 Exhaust Gas Recirculation (EGR) Flow Insufficient
Probably plugged passage's , not the EGR valve .
What type code reader are you using to read these codes ? I have factory service info. Doesn't show P0842 or P0642 , no such codes . You don't show what engine yours has , I'am assuming you have 3.5 L !
P0604
Control Module Random Access Memory (RAM)
PCM
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610 in Engine Controls - 2.2L (L61)
or
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610 in Engine Controls - 3.5L (LX9)

P0717
Input Speed Sensor Circuit Low Voltage
PCM
DTC P0717 in Automatic Transaxle - 4T40-E/4T45-E
P0741
Torque Converter Clutch (TCC) System - Stuck Off
PCM
DTC P0741 in Automatic Transaxle - 4T40-E/4T45-E
P0742
Torque Converter Clutch (TCC) System - Stuck On
PCM
DTC P0742 in Automatic Transmission - 4T40-E/4T45-E
P0748
Pressure Control (PC) Solenoid Control Circuit
PCM
DTC P0748 in Automatic Transmission - 4T40-E/4T45-E
P0751
1-2 Shift Solenoid (SS) Valve Performance - No First or Fourth Gear
PCM
DTC P0751 in Automatic Transmission - 4T40-E/4T45-E
P0752
1-2 Shift Solenoid (SS) Valve Performance - No Second or Third Gear
PCM
DTC P0752 in Automatic Transmission - 4T40-E/4T45-E
P0753
1-2 Shift Solenoid (SS) Control Circuit
PCM
DTC P0753 in Automatic Transmission - 4T40-E/4T45-E
P0756
2-3 Shift Solenoid (SS) Valve Performance - No First or Second Gear
PCM
DTC P0756 in Automatic Transmission - 4T40-E/4T45-E
P0757
2-3 Shift Solenoid (SS) Valve Performance - No Third or Fourth Gear
PCM
DTC P0757 in Automatic Transmission - 4T40-E/4T45-E
P0758
2-3 Shift Solenoid (SS) Control Circuit
PCM
DTC P0758 in Automatic Transmission - 4T40-E/4T45-E
P0815
Upshift Switch Circuit
PCM
DTC P0815 in Automatic Transmission - 4T40-E/4T45-E
P0816
Downshift Switch Circuit
PCM
DTC P0816 in Automatic Transmission - 4T40-E/4T45-E
P0826
Up and Down Shift Switch Circuit
PCM
DTC P0826 in Automatic Transmission - 4T40-E/4T45-E
P0973
1-2 Shift Solenoid (SS) Control Circuit Low Voltage
PCM
DTC P0973 in Automatic Transmission - 4T40-E/4T45-E
P0974
1-2 Shift Solenoid (SS) Control Circuit High Voltage
PCM
DTC P0974 in Automatic Transmission - 4T40-E/4T45-E
P0976
2-3 Shift Solenoid (SS) Control Circuit Low Voltage
PCM
DTC P0976 in Automatic Transmission - 4T40-E/4T45-E
P0977
2-3 Shift Solenoid (SS) Control Circuit High Voltage
PCM
DTC P0977 in Automatic Transmission - 4T40-E/4T45-E

Sometimes with code readers they get confused an just throw any old codes . Have it checked by someone with GM Tech 2 scan tool .

Aug 03, 2017 | Chevrolet Malibu Cars & Trucks

1 Answer

Why is my overdrive light flashing on my 2005 ford focus


That is what is called limp mode does the transmission shift gears real hard you need to Pull transmission codes and see what is the problem

Feb 13, 2015 | 2005 Ford Focus

2 Answers

How to fix a ford f150 with trans fault and flashing overdrive light with diagnostic codes p0731 and p0732>


P0731 Ford - Incorrect First Gear Ratio
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

p0732 Gear 2 Incorrect ratio
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poot electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit

Start by inspecting the transmission oil level and condition, and change fluid if necessary.

also check OUTPUT SHAFT SPEED OSS for proper installation and function

hope this helps

Sep 16, 2014 | Ford F-150 Cars & Trucks

1 Answer

Po756 code and blincking od light 96 ford explore


P0756 FORD - Shift Solenoid 2 Performancexicon.jpghttp://engine-codes.com/p0756_ford.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 2 valve
- Shift solenoid 2 valve harness or connectors
- Shift solenoid 2 valve circuit is open or shorted
help.png Help with thisTech notes When the a transmission solenoid is stuck off, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

Jul 06, 2012 | 1996 Ford Explorer

1 Answer

03 shift solenoid in a ford focus


IT DOESN'T SAY THE SOLENOID IS BAD, JUST THAT IT HAS A PROBLEM IN THE CIRCUIT TO THE SOLENOID, THIS CAN BE WIRING OR THE SOLENOID THAT IS AT ISSUE. THE SOLENOID IS PART OF A PACK OF SHIFT SOLENOIDS AND IT IS LOCATED INSIDE THE TRANSMISSION, YOU MUST REMOVE THE PAN FROM THE TRANSMISSION AND IT IS ATTACHED TO THE VALVE BODY. THIS IS A VERY MESSY JOB BECAUSE THERE IS NO FLUID DRAIN PLUG.

Apr 20, 2012 | 2003 Ford Focus

1 Answer

My automatic ford focus is stuck in park and the boot kept popping open on it's own at the beginning of this week.


Are you referring to a transmission shift solenoid, or the shifter lockout solenoid? The shift solenoids, that control the shifting of the transmission, are located internally in the trans, specifically in the valve body. The shifter lockout solenoid, which is the solenoid that prevents you from shifting out of park, without depressing the brake pedal, is located in the shifter assembly itself, below the center console.
The transmission solenoids are located just inside the fluid pan. Here is some info for replacing them. It is acually pretty easy.
The first time this issue happened (at 60k miles) I paid a '''transmission shop $600 to fix it. It just happened again (at 100k miles) and I fixed it myself for about $50. It's a fairly common problem, so I'm posting the symptoms, codes and instructions here to help others.

I own a 2002 '''Ford '''Focus with automatic '''transmission. The symptoms are that the '''transmission disengages (slips out of gear) when it goes into 3rd gear. When the car slows down to 20 miles an hour or so (or when you stop) it re-engages. You can drive the car in 1st or 2nd gear generally. The '''transmission light comes on. There are no noises associated with this problem. If you have this problem then it's probably the "A" '''Solenoid that needs to be replaced. Here's how you make sure that's the case and fix it for $50.

1. You need to pull the diagnostic computer codes. '''Ford will pull them for you for $100. But, you can do it for free by going to AutoZone. They have a loaner computer diagnostic code puller. If you bring the car they'll just do it for you in the parking lot. If you want to borrow the tool then they will want a $200 security deposit. I recommend that you bring the car to them if you it's close. Also, there are lots of small shops that will pull the code for you for free. There's no reason to pay a "diagnostic fee" to pull the computer repair code. This code will tell you Exactly which '''solenoid to replace. It's typically the "A" '''solenoid, though.

2. Once you get the code you need to know which '''solenoid to replace. Here is a list of diagnostic '''solenoid codes:

P0750 SSA SSA '''solenoid circuit failure SSA circuit failed to provide voltage drop across '''solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic. No reverse gear (short) or no fourth gear (open). Refer to Pinpoint Test A.
P0751 SSA SSA functional failure Mechanical or hydraulic failure of the shift '''solenoid. Not all gears present. REFER to Diagnosis By Symptom (307-01 , DIAGNOSIS AND TESTING).



Dec 03, 2010 | 2001 Ford Focus

2 Answers

2003 Ford Focus: Pulls Codes P0751, Shift Solenoid A, P2004 Control manifold runner stuck open, and P0752 Shift solenoid a circuit stuck on. I have changed the Solenoid A and my car still has a hard time...


Sounds like you need to cover basics first. The battery cables are clean and tight? Are all the wires in the battery cable at the battery making a good connection? Sounds like a common problem and is in the service bullitins is that the ground wire attached to the battery cable end that goes to the body and then to the transmission case bolt has failed to provide a good ground and the acuators and servos and even the switches have'nt a good path to ground ( their is one but it's though other controllers and the power isn't strongly grounded. I f you were following a dianostic tree of good and bad the ground is the number one cause of your problem. Don't fix the old grounds just add new ones. and then clear codes and test it again. Oil leaks near the transmission to engine connection were found by me everytime that I was assigned to this set of problems. Ground corrected and the car was fixed.

Aug 09, 2010 | 2003 Ford Focus

1 Answer

2004 Ford Focus with P0767 code Shift Solenoid D Stuck. Replaced solenoid and problem is still there. What could be causing my delayed shifting with overdrive light blinking?


please change the intermediate band, its a piece like a belt, may be changed removing the transmission end plate at the driver side, just unbolt the engine mounts for the transmission end get dowm somo inches and remove the end plate, there is the iintermediate band and can be changed so. sure the yours is broken... GL

Aug 08, 2010 | 2004 Ford Focus

2 Answers

2002 Kia Sedona XL suddenly downshifts


What was the codes exactly that Auto Zone gave you.??? it might just be a simple wire harness that may have gone loose since you did some work on the speed sensor.
Here are the trouble codes for your car.  Good Luck and get the car scanned again for a more define information.

P0751 Shift Solenoid A Performance or Stuck Off

P0752 Shift Solenoid A Stuck On

P0753 Shift Solenoid A Electrical

P0754 Shift Solenoid A Intermittent

P0755 Shift Solenoid B Malfunction

P0756 Shift Solenoid B Performance or Stuck Off

P0757 Shift Solenoid B Stuck On

P0758 Shift Solenoid B Electrical

P0759 Shift Solenoid B Intermittent

P0760 Shift Solenoid C Malfunction

P0761 Shift Solenoid C Performance or Stuck Off

P0762 Shift Solenoid C Stuck On

P0763 Shift Solenoid C Electrical

P0764 Shift Solenoid C Intermittent

P0765 Shift Solenoid D Malfunction

P0766 Shift Solenoid D Performance or Stuck Off

P0767 Shift Solenoid D Stuck On

P0768 Shift Solenoid D Electrical

P0769 Shift Solenoid D Intermittent

P0770 Shift Solenoid E Malfunction

P0771 Shift Solenoid E Performance or Stuck Off

P0772 Shift Solenoid E Stuck On

P0773 Shift Solenoid E Electrical

P0774 Shift Solenoid E Intermittent

P0780 Shift Malfunction




May 05, 2009 | 2002 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...