Question about Pontiac Cars & Trucks

Open Question

I have 2006 poniac gtp it was stolen they broke off the signal bar an wires are sticking out an it's REALY hard to turn the Wheel what could they have broke that needs repair!?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 126 Answers

SOURCE: Turn signal handle broke off and is hanging by wires

You can buy the turn signal switch at Napa or other auto parts stores. It's a combination switch. Remove the steering wheel and remove the 2 screws that hold the turn signal switch on, unplug the wires and installation is reverse of removal.

Posted on Apr 02, 2010

kelly60pak
  • 3 Answers

SOURCE: Steering is hard to turn

If it is power steering check the power steering fluid using your car manual to locate. there could be a small leak and it is low on fluid.

Posted on Dec 30, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Steering is hard to turn


If it is power steering check the power steering fluid using your car manual to locate. there could be a small leak and it is low on fluid.

Dec 30, 2016 | Cars & Trucks

1 Answer

Replaceing the turn signal relay. Cant locate it.


Does it have tilt wheel? And have you checked all the bulbs and wiring to the lights?

Sep 23, 2012 | 1990 Ford F150

2 Answers

I have a 2006 G6 GTP,, occasionally the traction control light comes on and the car shifts hard, please help


There are many reasons for the light to come on example: tire pressure not same in all tires, tires of diffrent size, ABS sensor wire loose or cracked. The best thing is to retrive the code which will tell you exactely what and which VSS vehicle speed sensor is failing.

Aug 23, 2011 | 2006 Pontiac G6

1 Answer

69 firebird turn signal switch does not cancel, need blow up of internal parts in column


You need to replace turn sinal switch its not hard remove center of steering wheel (horn button) remove steering wheel bolt with steering wheel puller pull wheel off remove turn signal handle three screws and emergency button, under dash on right side of steering colume disconect turn signal wires tape a long wire to the end of connector pull turn signal wires out with out pulling tape wire out so you can tape new turn signal wire connector to wire so you can pull it back through

Jun 29, 2011 | Pontiac Firebird Cars & Trucks

1 Answer

2006 KIA Sedona. Left turn signal light indicator blinks realy fast. The back turn signal works, but the front does not.


The first thing to check in this case would be the bulb itself. Remove the 13 plastic body screws retaining the the black plastic shroud at the front of the engine compartment. Next, remove the 2 10mm bolts retaining the lamp assembly. Gently work the assembly loose and pull it away from the vehicle; make sure to keep the assembly supported if you don't disconnect all of the wiring harnesses attached to it. Squeeze the clamp on the wiring harness to the turn signal bulb and remove the harness. Turn the socket assembly to remove the socket and bulb. Gently twist and remove the bulb. You should be able to see if the wire filaments are still continuous.

If the bulb is good, look at the inside of the socket. There is a little copper strip that runs down the side. If it is not sticking out making a " V " shape where the point would touch the side of the bulb, that's generally gonna be the problem. The point of the "V" completes the ground circuit for the bulb. Using a paper clip with a small hook, a precision screwdriver, or something else thin that can give you leverage, GENTLY pull at the strip until it comes out enough to make a good contact. You could also get a replacement socket from the dealership. Ask about rate of failure on this part and other things that would bring about images of recalls, maybe you'll get it free but probably not.

Sep 27, 2010 | 2006 Kia Sedona

1 Answer

Turn signal handle broke off and is hanging by wires


You can buy the turn signal switch at Napa or other auto parts stores. It's a combination switch. Remove the steering wheel and remove the 2 screws that hold the turn signal switch on, unplug the wires and installation is reverse of removal.

Apr 02, 2010 | 1992 Ford F150 SuperCab

3 Answers

Im trying to change my fuses for my hazrard lights. on a G6 2006 poniac. i cant find it in the manual. don't really know if thats what you do, cause when i push the hazrard button they don't work.


This is not fuse, is an flasher, and maybe is integrated with hazard & turn signal module.

Also need review this RECALL

Hope helped with this. Good luck.

Nov 09, 2009 | 2006 Pontiac G6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...