Question about 2005 Ford Escape

1 Answer

To konw the cause of the problem and get it fix.2005 ford escape has a centeral lock and door glass issue.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,802 Answers

Which door are you having electrical issues with ? Just one or all ? And what kind of problem are you having ? Power windows and locks not working at all , won't up , doors don't lock ? All the time or intemittantly ? You can check for broke or almost broke wires inside the rubber boot from body of the vehicle to the door . The power and ground wires for the door switch are in there . Opening and closing the door over time the wires can break .

Posted on Dec 30, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keyless remote for 2005 ford escape


You have to take you car to the dealer with proof of ownership.

Jul 25, 2017 | 2005 Ford Escape

1 Answer

I have a 2009 Ford Escape, the rear hatch doesn't open but th glass works fine. I think the problem is the lock actuator because when locking/unlocking the car, you can't hear the rear actuator making any...


It is definately the locking mechanism. .same issues with mazda tribute and mercury mariner ford escape...you will need to remove the panel to replace it..m

Jan 24, 2018 | Cars & Trucks

1 Answer

Why is my door jam alarm keeping coming on when all my doors are closed and my alarm door lock goes when the truck is locked


One of your door switches is faulty. You will need to have it scanned to see which door it is then replace the door latch assy. in that door.

Dec 23, 2017 | 2005 Ford Escape

1 Answer

Remote locking/unlocking device suddenly stopped working - battery change did Not fix the problem Is this a wiring issue? and if so where do I look? Car is a Ford Escape


take it to auto zone they will test if its still good if it is u may need to replace the battery on the romote or reprogram it to ur vechicle if needed to reprograming look at the thing were they connect the computer under the dash on the driver side then connect a wire from the 4th port and the 8th port the doors will lock and unlock signaling that the remote is ready to program then hold the lock key for 15 sec and your done

Apr 15, 2010 | 2005 Ford Escape

2 Answers

2005 Ford Escape - Door Open Indication Light & Horn Alarm Sounds


This is probably caused by:

a loose door switch, or

a loose connection to a door switch, or

a defective (dirty / corroded) door switch.

There is a false signal being sent that a door is open / ajar.

Oct 20, 2009 | 2005 Ford Escape

1 Answer

2005 FORD ESCAPE


it's by the gas pedal.

The multifunction module consists of the generic electronic module (GEM).
The GEM controls the following features:
  • interval rear window wiper
  • battery saver
  • illuminated entry
  • headlamp control
  • interior lamp control
  • power door locks
  • remote keyless entry (RKE)
  • accessory delay
  • perimeter anti-theft system
  • door ajar output control
Generic Electronic Module (GEM) 2003 escape Removal and Installation
  1. NOTE: Prior to removal of the GEM, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed. For additional information, refer to Section 418-01 .
    Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the pin-type retainer and the lower shield.
6897dd8.gif
  1. Position the RH and LH carpet aside from the center tunnel.
  2. Disconnect the GEM electrical connectors.
29785c6.gif
  1. Remove the GEM
    1. Pull back the insulation and remove the nuts.
    1. Remove the GEM.
  2. To install, reverse the removal procedure.
    • Configure the GEM. Refer to Section 418-01 .

Feb 06, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2005 Ford Escape Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...