Question about Volvo S70

1 Answer

In other words volvo also supply factory complete headlights for this model but what i need to know is whether the electrical connectors will fit from v70 t5 2001 straight into new units over

Posted by on

  • gracat Jul 21, 2009

    yes-tks vm

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 19,396 Answers

The connectors at the back of the headlight assembly can be adapted, but if the two cars are from the same year the connectors should be the same.
The headlights assembly is often sold by part sellers as replacement for S70/V70/C70 , therefore the connector should be the same.
If you do not want to replace the whole headlight assembly , you can also replace the lens only, see here.
If parts are from same year, the connector should be the same

Regards.

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 volvo v40 front bumper removal to change headlight lens


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Dec 03, 2016 | Volvo V40 Cars & Trucks

1 Answer

How can I dissasembly headlamp from body


to replace headlight bulbs turn steering so you can open flap in the wheel arch.open flap liner to access of the rear headlight unit.to remove inner bulb in headlight housing remove the air intake duct at front of the air cleaner housing right hand side unclip the wiring harness connector unclip the the left wiring harness connector front of fuse and relay.to remove the dipped beam remove the plastic cover from rear of head light unit.through wheel flap opening. rotate bulbholder anti clockwise to remove bayonet fitting remove headlight bulb. WARNING WEAR CLEAN GLOVES WHEN HANDLING HEADLIGHT HALOGEN BULBS OILS FROM HANDS WILL CAUSE HALOGEN BULB TO OVERHEAT AND BLOW OUT.

Dec 01, 2012 | 2007 Renault Scenic 1.6

1 Answer

Removing low beam bulb on 05 subaruoutback


Whether they become damaged in an accident or simply burn out over time, your Subaru Outback's headlights may eventually need to be replaced. Fortunately, once you've purchased the right replacement bulb for your model year, performing the repair yourself is relatively easy. These instructions only apply to Outback models made after 2000.

  1. Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment (driver's side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Turn the bulb cover counterclockwise and remove it from the assembly.

  4. 4

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  5. 5

    Pull the old bulb directly out of the socket and replace it with the new one. Press the retaining spring back into place and reattach the electrical connector.

  6. 6

    Replace the bulb cover, and then turn on the engine. Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

    Replacing the High-Beam Bulbs
  1. 1

    Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment ( drivers side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  4. 4

    Turn the headlight bulb counterclockwise and pull it out of the socket.

  5. 5

    Reinstall the new bulb, replace the retaining spring and reconnect the electrical connector.

  6. 6

    Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

Sep 14, 2012 | Cars & Trucks

1 Answer

My headlight was loose in my 98 Buick lasBre causing it to pop out as I was driving in doing so a wire and connector piece was snatched from another connecting piece...it would really help to know what...


If you go to the part store, look at the headlight and ask if they have an electrical pigtail to fit it. You should be able to install it fairly easily with electrical **** connectors

Mar 06, 2012 | 1998 Buick LeSabre

1 Answer

Removing and installing new headlight bulb


need more information..... 2000 Volvo S40, you gain access from inside the engine compartment and reach in behind the light, remove the spring holding it in place, remove and be careful not to touch the glass on the new bulb. The electrical connector is inside the housing and covered with a rubber plug

May 26, 2011 | Volvo S60 Cars & Trucks

1 Answer

How to install headlights on 2002 toyota camry


I assume you mean just the bulbs:
  1. 1 Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off.
  2. 2 Open the hood using the primary and auxiliary hood release latches.
  3. 3 Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced.
  4. 4 Turn the headlight bulb socket counterclockwise to remove it from the assembly.
  5. 5 Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.
  6. 6 Attach the electrical connector to the new bulb and insert it into the headlight assembly. Twist it clockwise to secure its position.
  7. 7 Test the new headlight to make sure it works before closing the hood.
Thank you,
Lee

Aug 25, 2010 | 2002 Toyota Camry

1 Answer

Can I fit electric seats in my 2001 volvo s60 the seats are from a 2005 model, the problem is in the 2001 car there appears to be not enough cable block connectors to fit into the new seat. and is it...


Yes,if the wiring is not the same, you will have to either find different
wire harnesses that fit, or last but least, have someone good with
electric, find the power wire from the old harness, and get it wired into
the new seats to power them up. Good luck.

Mar 29, 2010 | 2001 Volvo S60

1 Answer

How do i replace a low beam head light on a 94' camry ?


Things You'll Need:
  • #H11-55W and #9005 replacement bulbs (low- and high-beam bulbs for 2007 and later models)
  • #9006 and #9005 replacement bulbs (low- and high-beam bulbs for 2002-2006 models).
STEPS TO REPLACE HEAD LIGHT: Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off. Open the hood using the primary and auxiliary hood release latches. Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced. Turn the headlight bulb socket counterclockwise to remove it from the assembly. Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

Dec 05, 2009 | 1994 Toyota Camry

1 Answer

Electrical Connector burnt on headlight. Can connector be replaced?


cut the wire at bulb install female wire connector

Jun 02, 2009 | 2003 Volvo S80

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...