Question about 2002 Mitsubishi Galant

1 Answer

How to remove water pump pulley on 2002 Mitsubishi galant 2.4

Posted by on

  • Ernest Lopez Jan 13, 2017

    The flange that holds the pulley doesn't let come off? How do i take it off?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 76,848 Answers

It is held on by four bolts, remove them and tap the pulley to break the rust bond.

Posted on Dec 29, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 599 Answers

SOURCE: Water Pump Replacement

it is pressed onto water pump..will not come off when you remove fan clutch

Posted on Dec 05, 2008

  • 2 Answers

SOURCE: 2002 mitsubishi galant

Has it overheated lately?
My wife overheated our Galant and it just stopped working, it cranks but that's it.
I pulled the sparkplugs and found them wrapped in a gewey jelly like substance. Like an oil/antifreeze combo.
I am going to replace the entire motor for $1000 as taking it to the mechanics to theorize and practice may cost more.

Posted on Dec 14, 2008

daves944
  • 1050 Answers

SOURCE: removing water pump 98 buick park avenue

You need to poke a small extension with a 13mm socket through the holes in the power steering pulley, undo it, and slide it back.

Posted on Mar 17, 2009

  • 141 Answers

SOURCE: remove the power steering pump pulley on a 2003 monte carlo

you can either remove the steering pump to gain access,if there is no holes in PS pump pulley,you can rent a pulley puller....can be a ***** to get in and use them though....I will drill a hole in it for next time whenever I replace a pump on cars without ....

Posted on Aug 09, 2009

techbuster
  • 5081 Answers

SOURCE: 2003 MITSUBISHI GALANT HOW TO REPLACE HEADLIGHT BULB

First you disconnect the 3 prong electric plug. To disconnect squeeze the side tabs together (hard) and pull away from the bulb, then you can pull off the protective rubber covering, (its a little snug so give it a tug from the 2 tabs on the top and bottom).

Next unscrew the little Phillips head screw to loosen the bracket that clips in the bulb (take note of how the clip is installed before you remove it, it holds the bulb securely in place).
Just loosen the screw as you do not need to remove it all the way. Pull out the old bulb and replace it with the new one.

The bulb has 3 spacing tabs on it so it can only go in one way. Make note of this when you remove it so you may replace it the same way. follow the steps in reverse and your done.
Note: The little wire clip that holds the bulb in can be a pain. Make sure you get a really good look at it, since it pops out as soon as you loosen the screw. If you get lost, you can always look at the other headlight. Oh, and don't do this in the dark.

Posted on Sep 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2002 mitsubishi galant 2.4 and there is a nosie coming from the belt or pulley when ever I start it.


Check to see if belt is worn, bearings in some pulleys may be worn also....replace whatever is worn.

Jan 11, 2017 | 2002 Mitsubishi Galant

1 Answer

Why is no fuel getting to the injectors?


Check the Fuel pump

2003 Mitsubishi Galant Repair and Maintenance - RepairPal

repairpal.com > Cars > Mitsubishi > Galant
Information on the 2003 Mitsubishi Galant, including known problems, recalls, user ...2002 Mitsubishi Galant ... it will crank but not start not getting any spark or fuel what can you suggest. would like . ... The fuel return line fitting at the fuel pump may be restricted, causing excessive fuel pressure in the fuel injection system.

Sep 25, 2015 | 2002 Mitsubishi Galant

1 Answer

Where is the crank sensor on a 2002 mitsubishi galant 2.4 liter is located


its behind the timing belt down by the crank pulley. Basically you will need to remove the timing belt in order to replace

Dec 15, 2012 | 2003 Mitsubishi Galant

2 Answers

2003 Mitsubishi Galant Idler Belt Tensioner Replacement


I also need help knowing how to replace the belt tensioner pulley. It looks like you can't get out the bolt because the pulley is real close to the frame, unless the bolt has nuts on both ends, but it doesn't look like it.

Dec 03, 2011 | 2003 Mitsubishi Galant

1 Answer

How much on average would it cost to get a new motor for a 2002 mitsubishi galant and get it put in?


If a 4G64 4 cylinder, a decent used engine would be about $700. This engine will have to be serviced with new belts and water pump before its installed. 2 hours labour.

Removing the old engine takes about 3 hours labour.

Installing the new one takes about 4 hours. You should replace radiator hoses and clamps. If the radiator is in poor condition, a new one is strongly suggested.

So you are looking at 8-10 hours labour plus used engine and service parts.

If a V6, the engine might be $1200. Labour to R/R is the same.


SD

Sep 16, 2011 | 2002 Mitsubishi Galant

1 Answer

Where is the water pump located on a mitsubishi galant exe 1994..? and whats the best way to remove and replace it..? cheers..


All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car. You will have to take off the power steering belt, the alternator belt, the upper belt cover, support the motor, take off the motor mount, line up the tdc timing mark, take off the lower pulleys, take off the lower cover, take off the timing belt, counter balancer belt if there is one, water pump belt, and now you can unbolt the water pump, scrape the gasket, and replace it. Now the good news, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually save money and do it your self.

Sep 11, 2010 | 1994 Mitsubishi Galant

1 Answer

Change timing belt galant 04 mivec 2.4


49885ff.gif
Timing belt “B” (balancer belt) and related components—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


  1. Disconnect the negative battery cable. Remove the engine under cover.
  2. Remove the crankshaft damper pulley.
  3. Disconnect the control wiring harness connector, battery wiring harness connector and connector bracket to engine mounting insulator.
  4. Remove the harness bracket. Remove the upper timing belt cover. Remove the water pump pulley. Remove the idler pulley.
  5. Remove the auto tensioner. Remove the lower timing belt cover.
  6. Turn the crankshaft clockwise and align each timing mark to set the number one piston to TDC of its compression stroke.
  7. Remove the timing belt under cover rubber plug and then install special tool MD998738. Screw the special tool until it contacts the timing belt tensioner arm.

    NOTE The special tool must be screwed in gradually at the rate of a 30 degree turn per second. If it is screwed in all at once, the timing belt tensioner adjuster rod will not easily retract and the tool may bend.

  8. Gradually screw in the special tool and then align the timing belt tensioner adjuster rod set hole “A” with the timing belt tensioner adjuster cylinder set hole “B”.
  9. Insert a wire or pin in the set holes to lock the assembly in place. After removing the special tool, loosen the timing belt tensioner pulley mounting bolts and remove the timing belt. If the belt is being reused be sure to mark the direction of rotation (clockwise) on the belt.
  10. Remove the timing belt tensioner pulley, tensioner arm and adjuster.
  11. Remove the timing belt idler pulley. Remove the timing belt lower cover bracket. Remove the crankshaft position sensor.
  12. Remove the crankshaft pulley center bolt and washer. Remove the drive sprocket. Remove the crankshaft angle sensing blade.
  13. Remove the balancer timing belt tensioner. Remove the timing belt “B” (balancer belt) from its mounting.


284eb62.gif
Timing belt tensioner adjuster rod set hole “A” and cylinder set hole “B”—2004–2005 Galant and 2004–2005 Lancer 2.4L engine

To install:


78b2d67.gif
Belt tension checking—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


b8fcecc.gif
Cylinder block plug location—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


bad1ef9.gif
Timing belt sprocket alignment—2002–2004–2005 Galant and 2004–2005 Lancer 2.4L engine

Feb 27, 2010 | 2004 Mitsubishi Galant

1 Answer

Unable to remove crankshaft pulley on 1998 Mitsubishi Galant 2.4L


crankshaft pulley nuts are very tight,some are 85-90 ft lbs.use a 1/2 inch drive breaker bar & socket.put auto trans in park manual trans in gear with emergency brake on.

Oct 18, 2009 | 1998 Mitsubishi Galant

1 Answer

Where is the water pump located on a 2001 mitsubishi galant?


Your water pump is bolted into the engine block where the drive belts are, just above the crank shaft pulley.

Jul 13, 2009 | 2001 Mitsubishi Galant

2 Answers

2002 Mitsubishi galant


Remove the drive belts, crankshaft pulley, and timing covers. Align the timing marks on the camshaft and crankshaft and r+r the belt

May 15, 2008 | 2002 Mitsubishi Galant

Not finding what you are looking for?
2002 Mitsubishi Galant Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...