Question about Cars & Trucks

1 Answer

Need an electrical switcj connector for steering column is there one that interchangeable from another year or model?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,164 Answers

Sorry this site doesn't sell any parts or have anyway to look up this type of interchangeability information.

Posted on Dec 29, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What steering colums are interchancable with a 1993 caddy eldorado


Steering columns are rarely interchangeable.. due to specific accessories and controls... you need to find one that exactly replaces yours... trying to "add" a different one is inviting an electrical PROBLEM !!!

( I was a GM VOC.. and veteran column person)

Jun 25, 2017 | Cars & Trucks

1 Answer

I have a 2000 mitsubishi galant we switched the key ignition and whole steering wheel column and the car wont start,but will turn over, what do we need to do?


If the "new" steering column was from the same year and model car, then the problem may be that the electrical connectors are not making good contact. Disconnect the connectors and check to see if each end is clean and that no pins are bent or broken, If they check OK, then firmly re-connect them. Try to start the car. If the car still will not crank/run check the ignition fuse (maybe do this this as 1st step).
If the "new" column is from a different year or model, then the connectors may fit together, but the wiring may be different. If so proper contact will not be made through the connection.

Oct 10, 2016 | 2000 Mitsubishi Galant

1 Answer

Will a tilt steering column replace a non-tilt column in a 1989 F 150 w/AT?


If you get one from a truck that is close to the same year, it should swap out. A salvage yard can give you the years and models that interchange.

Sep 26, 2013 | 1989 Ford F 150

1 Answer

I need to replace the steering column in my 1990 F350 supercab with cruise control what years will interchange?


We do not have parts interchange books. Contact your local Ford salvage yard and they can look that up for you on a computer. Generally speaking 80's to mid 90's will work.

Dec 21, 2012 | Cars & Trucks

1 Answer

What are the instructions to remove and replace the combo turn signal switch, located in the steering column, for a 1999 bravada


Warning: 1995 and later models are equipped with an airbag. Always turn the steering wheel to the straight ahead position, place the ignition switch in Lock and remove key, then remove the airbag fuse and unplug the yellow Connector Position Assurance (CPA) connector at the base of the steering column before working in the vicinity of the impact sensors, steering column or instrument panel to avoid the possibility of accidental deployment of the airbag, which could cause personal injury. The yellow wires and connectors routed through the instrument panel are for this system. Do not use electrical test equipment on these yellow wires or tamper with them in any way while working under the instrument panel.
Caution: On models equipped with a Delco Loc II anti-theft audio system, be sure the lockout feature is turned off before performing any procedure which requires disconnecting the battery.

  • The turn signal switch function is incorporated into the multi-function switch, along with the wiper/washer and headlight dimming controls.
  • Disconnect the negative battery cable. Remove the steering column covers and the drivers knee bolster.
  • Remove the two Torx screws securing the multi-function switch to the top of the steering column.
  • Clip the wire-ties securing the multi-function switch harness to the other steering column wires.
  • At the bottom of the steering column, remove the bolt securing the large bulkhead electrical connector to the firewall.
  • Separate the two multi-function switch connectors from the large bulkhead connector.
  • The multi-function switch and its harness must be replaced as a unit.
  • Installation is the reverse of removal

Mar 16, 2011 | 1999 Oldsmobile Bravada

1 Answer

How do i replace a heater cord?


  1. Disconnect the battery ground cable
  2. Remove the console glove compartment. Disconnect the power point electrical connector. If equipped, disconnect the cellular phone antenna cable and coaxial cable from the console glove compartment. If equipped, disconnect the cellular phone antenna cable and coaxial cable.
  3. If equipped, remove the compact disc changer. Remove the screws. Disconnect the electrical connector. Remove the digital audio compact disc player.
  4. Place the gearshift lever in the 1 position.
  5. Remove the console top panel. Disconnect the cigar lighter electrical connector.
  6. Remove the floor console to floor bracket screws.
  7. Remove the floor console to gearshift bracket screws.
  8. Remove the floor console. Slide the floor console rearward. Remove the floor console. Disconnect the three electrical connectors. CAUTION
    Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
  9. Remove the passenger side air bag module. WARNING
    Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment. WARNING
    Carry a live air bag module with the air bag and deployment door pointed away from your body. This will reduce the risk of injury in the event of an accidental deployment. WARNING
    Do not set a live air bag module down with the deployment door face down. This will reduce the risk of injury in the event of an accidental deployment.
  10. Disconnect the battery ground cable and wait at least one minute.
  11. Push in on the two glove compartment door tabs and position downward.
  12. Disconnect the passenger air bag module electrical connector. Remove the passenger air bag module retaining bolts.
  13. Remove the passenger air bag module. Note: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
  14. If equipped, remove the rear seat climate control air duct sleeve.
  15. Remove the steering column. CAUTION
    Do not remove the steering column, steering wheel and air bag module as an assembly from the vehicle. Unless the steering column is locked to prevent rotation; or the lower end of the steering shaft is wired to prevent the steering wheel from being rotated, damage to the air bag sliding contact will occur. NOTE: All steering column components are assembled with specific fasteners. They are designed with a thread locking system to prevent loosening due to vibrations associated with normal vehicle operation. Make sure vehicle front wheels are in the straight-ahead position
  16. Remove the ignition switch lock
  17. Remove the steering wheel.
  18. Remove the air bag sliding contact.
  19. Remove the tilt wheel handle and shank by unscrewing it from the steering column.
  20. Remove the four upper and lower steering column shroud retaining screws. Remove the upper steering column shroud and lower steering column shroud.
  21. Remove the lower instrument panel trim cover.
  22. Unsnap the steering column lower trim panel.
  23. Remove the release lever hood retaining screws.
  24. Remove the brake release retaining screws.
  25. Remove the instrument panel steering column opening cover reinforcement
  26. Remove the instrument panel reinforcement brace.
  27. Disconnect the shift cable and bracket from the steering column by removing two screws.
  28. Disconnect the transmission shift cable loop from the shift tube hook (column shift).
  29. Remove the two multi-function switch retaining screws and set the multi-function switch aside.
  30. Remove the retaining screw and remove the wiring connector from the ignition switch.
  31. Remove two front steering column nuts and the steering column impact absorber
  32. Remove the pinch bolt from the steering column lower yoke.
  33. While supporting the column assembly, remove two rear column assembly retaining nuts.
  34. Disconnect the shift cable and bracket from the selector lever pivot. Disconnect the shift cable from the steering column shift tube lever. Disconnect the shift cable from the steering column bracket.
  35. Remove the shift cable and bracket from the lower column mounting.
  36. Remove two shift lock actuator-retaining screws and remove the shift lock actuator (console shift only).
  37. Remove the steering column from the vehicle.
  38. Release the cable from the parking brake actuator.
  39. Release the cable conduit from the parking brake actuator.
  40. To disconnect the driver's side outboard bulkhead electrical connector. Loosen the bolt. Disconnect the driver's side bulkhead electrical connector.
  41. To disconnect the driver's side inboard bulkhead electrical connector. Loosen the bolt. Disconnect the driver's side bulkhead electrical connector.
  42. If equipped, disconnect the heated seat switch electrical connectors.
  43. Remove the steering column mounting support to instrument cowl brace bolts.
  44. Remove the instrument panel dash brace to instrument panel bolt.
  45. Loosen the nut that secures the instrument panel dash brace. Position the instrument panel dash brace aside.
  46. Remove the pin-type retainers. Remove the passenger side instrument panel insulator. Remove the courtesy lamp.
  47. Disconnect the vacuum harness connector.
  48. Disconnect the in-line electrical harness connector.
  49. Position the passenger side scuff plate aside.
  50. Remove the passenger side cowl trim panel.

Feb 06, 2011 | 1999 Lincoln Continental

1 Answer

How do i install Switch Assembly turn signal Cruise control PART AUTO for a 2002 Impala.


Multifunction Turn Signal Lever Replacement - On Vehicle

Removal Procedure

83422682


  1. Verify that the multifunction turn signal lever is in the center of the OFF position.
  2. Disconnect the negative battery cable.
  3. Disable the SIR system.
  4. Remove the steering wheel.
  5. Remove the steering column trim cover.
  6. Remove the steering column knee bolster.
  7. Remove the steering column wire harness (1) from the steering column wire harness retainer (2).
  8. Remove the 2 wire harness straps from the steering column wire harness (1).
  9. Remove the steering column bulkhead connector from the vehicle wire harness.
  10. Disconnect the connectors from the multifunction turn signal lever steering column bulkhead connector.
85097560




  1. Remove the retaining bolts (1) from the multifunction turn signal lever (2).
  2. Remove the multifunction turn signal lever (2) from the steering column.
Installation Procedure

85097560




  1. Install the multifunction turn signal lever (2). Use a small flat-blade in order to compress the electrical contact and move the multifunction turn signal lever into position.
  2. Verify that the electrical contact rests on the canceling cam.
Notice: Refer to Fastener Notice in Service Precaution.


  1. Install the retaining bolts to the multifunction turn signal lever.
    • Tighten the retaining bolts to 7 Nm (62 inch lbs.) .
92905224




  1. Connect the gray and black connectors to the multifunction turn signal lever steering column bulkhead connector.
  2. Connect the steering column bulkhead connector to the vehicle wire harness.
  3. Install the two wire harness straps to the steering column wire harness (1).
  4. Install the steering column wire harness (1) to the steering column wire harness retainer (2).
  5. Install the steering column knee bolster.
  6. Install the steering column trim cover.
  7. Verify that the lever is in the center or the OFF position.
  8. Install the steering wheel to the steering column.
  9. Enable the SIR system.
  10. Connect the negative battery cable.
I hope this helps you.

Thanks

Nov 28, 2010 | 2002 Chevrolet Impala

1 Answer

Steering wheel covers


I hope this helps....these are the steps to removing and replacing the cylinder:

  1. Remove the knee bolster.
  2. Remove the steering column trim covers from the steering column.
  3. Disconnect the steering column electrical connectors.
  4. Remove the wire harness assembly from the steering column and the wire harness strap.
  5. Slide the 2 connectors of the turn signal and multifunction switch assembly out of the bulkhead connector.
  6. Remove the key alarm connector from the lock module assembly in the following way:
  7. Rotate the key alarm connector 90 degrees.
  8. Pull the key alarm connector out of the lock module assembly.
  9. Remove the passkey connector from the lock module assembly.
  10. Remove the connector from the electric park lock, for vehicles equipped with floor shifters.
  11. Remove the ignition switch from the lock module using tool J42759 or equivalent.
To install:
  1. Install the ignition switch to the lock module
  2. Install the key alarm connector into the lock module assembly.
  3. Push the key alarm connector into the lock module assembly.
  4. Rotate the key alarm connector 90 degrees so that the key alarm connector locks into place.
  5. Install the passkey connector into the lock module assembly.
  6. Install the connector to the electric park lock, for vehicles equipped with floor shifters.
  7. Slide the 2 connectors of the turn signal and multifunction switch into the bulkhead connector.
  8. Attach the wire harness assembly to the steering column wire harness strap.
  9. Connect the steering column electrical connectors to the vehicle.
  10. Install the trim covers to the column.
  11. Install the knee bolster.
  12. Enable the SIR system.
  13. It may be necessary to reprogram the theft deterrent system if the module was replaced.

Mar 06, 2010 | 2001 Chevrolet Suburban

1 Answer

Need help with dash removal.


  1. Remove the A-pillar and cowl side Trim Panels
  2. Remove the front floor console.
  3. Depower the supplemental restraint system (SRS).
  4. Remove the instrument panel side finish panels.
  5. Remove the 2 steering column opening cover screws.
  6. Remove the steering column opening cover.
  7. Remove the 3 lower steering column cover screws.
  8. Remove the lower steering column cover.
  9. Disconnect the steering column electrical connectors.
  10. Disconnect the RH side bulkhead electrical connector.
  11. Disconnect the RH side body harness electrical connector.
  12. Remove the 2 parking brake release handle screws.
  13. Disconnect the LH side instrument panel electrical connectors.
  14. CAUTION: To avoid damage to the clockspring, do not allow the steering column shaft to rotate while the intermediate shaft is disconnected.
  15. Remove the pinch bolt..
  16. Disconnect the adjustable pedal electrical connector.
  17. Disconnect the brake light switch electrical connector.
  18. Remove the 2 LH instrument panel center brace bolts..
  19. Remove the 2 LH instrument panel center brace nuts.
  20. Remove the LH instrument panel center brace.
  21. Disconnect the transmission range selector lever cable.
  22. Disconnect the RH side bulkhead electrical connector.
  23. Disconnect the LH side body harness electrical connector.
  24. Remove the 3 ground strap bolts.
  25. Disconnect the inertia switch electrical connector.
  26. Disconnect the RH side instrument panel electrical connectors.
  27. Remove the 2 RH instrument panel center brace bolts.
  28. Disconnect the vacuum connector.
  29. Remove the 2 RH instrument panel center brace nuts.
  30. Remove the RH instrument panel center brace.
  31. Remove the cowl panel grille
  32. Remove the instrument panel bolt located under the cowl panel grille
  33. Remove the instrument panel defroster grille.
  34. CAUTION: To avoid damage to the sunload sensor and electrical connector, remove the grille just enough to disconnect the connector.
  35. Disconnect the sunload sensor electrical connector.
  36. Remove the 2 instrument panel top cowl bolts.
  37. Disconnect the antenna lead-in cable.
  38. Disconnect the RCM electrical connector.
  39. Disconnect the center ground strap bolt.
  40. CAUTION:To avoid damage to the instrument panel, an assistant is required to support the panel before carrying out this step.
      • Before removing the instrument panel make sure all electrical connector wiring is free and not hindered.
  41. Remove the 4 instrument panel bolts.
  42. Remove the instrument panel.
  43. To install, reverse the removal procedure.

Feb 11, 2009 | 2005 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...