Question about Buick Cars & Trucks
If the element is open that will be the cause. Check it for continuity. If it checks out ok then it is not receiving power.
Posted on Dec 29, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: replace the rear view mirror
Gently tap the base of the mount upwards. I just replaced mine and I thought there was a cover over the winshield mount, turns out it is just pushed on to the wedge that is mounted to the windshield. Good Luck, webree
Posted on Nov 10, 2008
Fan will be under dash on passengers side , Removing glove box might be needed, Gm also uses a blower resister ro control fan speeds. First check your fuse and then check and make sure your getting 12 volts to the terminal at the blower, You could have a blown fuse, a bad switch, or a bad resister , if your getting voltage to blower motor then most likely it will be the motor. These are not to difficult to change. I hope this helps, please be aware I can only guess at what the problem is from my past experience.
Posted on Dec 18, 2008
yes you will you will have to take side trims and sill panel off get a 10 mm ready and take the bolts out the tail liaghts should come out the license lamps have screws in them and if you looka t them but you should be able to twist bulbs and pull them out / Please rate my response thank you very much
Posted on Jan 30, 2009
This is a very common problem. I too have this going on. I found a Edmunds Forum and a poster has a fix, at least for him. Link: http://townhall-talk.edmunds.com/WebX?14@@.ef22120/307#MSG307 and see if this is your problem too. I ordered a new headlight switch. Its an easy replacement too. Remove the left side dash panel, two screws and the 20 pin connector. Hope this helps.
Posted on Feb 22, 2010
Tips for a great answer:
Oct 02, 2014 | 1999 Buick Century
Jan 09, 2014 | 1998 Buick Century
Sep 03, 2013 | 1995 Buick Century
Jan 23, 2013 | Cars & Trucks
Jan 19, 2013 | 1998 Buick Century
Oct 12, 2010 | 1998 Buick Century
May 12, 2010 | 1998 Buick Century
Mar 13, 2010 | 1999 Buick Century
Apr 19, 2009 | 1998 Buick Century
May 26, 2018 | Buick Cars & Trucks
17 people viewed this question
Usually answered in minutes!