Question about Cars & Trucks

Open Question

Where on the DIC is the set/reset button to use after an oil change to reset to 99%?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 29 Answers

SOURCE: reset change oil warning with no DIC o steering wheel

Turn the key till all the lights come on then press the gas pedal to the floore 3 times in 5 seconds .

Posted on Mar 29, 2009

Ad
  • 599 Answers

SOURCE: oil life will not reset

have seen this a few times,take it back to the dealer or someone who has a TECH 2 or similar scan tool and have him clear the light. ps dont hold tthe enter button too long 1-2seconds tops,get back to me if you need more help

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset change oil light


Driver Information Center (DIC) Equipped

Step 1 of 5

Place the key in the ignition and then turn it to the On/ACC position with the engine off.

Step 2 of 5

Press the "mode" button on the DIC until "Oil Life Left/Hold Set to Reset" is displayed on the DIC screen.

Step 3 of 5

Press the "set" button and hold it down until "100%" is displayed on the DIC display screen.

Step 4 of 5

Wait until three brief chimes emit before turning the ignition key back to the off position.

Step 5 of 5

Start the engine of the Aztec to ensure the oil warning light ("Change Engine Oil") is no longer illuminated on the instrument panel. If it still is, repeat the procedure.

Non-DIC (Manual Change Oil Light)

Step 1 of 4

Insert the key into the ignition and turn it to the ON/ACC position with the engine off.

Step 2 of 4

Step on the accelerator pedal fully to the floor three times within five seconds.

Step 3 of 4

Turn the ignition key to the off position.

Step 4 of 4

Start the engine to ensure the oil warning light is no longer illuminated on the instrument panel. If it is,repeat the procedure.

Aug 22, 2013 | 2003 Pontiac Aztek

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

Tip

Buick service light 1991-01


LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











on Dec 07, 2009 | Buick LeSabre Cars & Trucks

1 Answer

Reset oil change message 200s cadillac sts


1. Press the SKIP INFO button until the DIC displays ENGINE OIL LIFE.

2. Press and hold the INFO RESET button until 100% OIL LIFE is displayed on the DIC.

Feb 25, 2012 | 2002 Cadillac Sts

1 Answer

Change Engine Oil Light stays on


if your vehicle does not have the optional Drive Imformation( DIC) do the followig. 1.with the ignition key ON, but the egine OFF , fully push and release the accelerator pedal 3 times within five seconds. - the Change Engine Oil message should be off - If the Change Engine Oil message comes back on, the engine oil life monitor has not reset, Repeat the procedure. If your vehiclehas the optional ( DIC ), do the following: 1 turn the engine ON, with the engine OFF. 2 press the MODE button until the DIC reads OIL LIFE LELT/ HOLD SET TO RESET 3. press and hold the SET button until 100% is displayed. You will hear 3 chrimes and the Change Engine Oil message will go off. if the Change Oil message comes back on, the system has not reset, Repeat the procedure. Hope this can help , Good luck

Apr 11, 2010 | 2001 Pontiac Aztek

1 Answer

Change oil message stays on even after repeatedly cancelling


Pontiac Aztek, Montana 2001-05 w/o (DIC) Driver Information Center; Torrent, Ascender 2006

Turn the ignition to ON, with the engine off. Fully depress and release the accelerator pedal slowly three times within five seconds. Turn the key to OFF If the CHANGE ENGINE OIL’ message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Pontiac Aztek, Montana 2001-06 wI (DIC) Driver Information Center

urn the ignition to ON, with the engine off. Press the MODE button until the DIC reads ‘OIL LIFE LEFT/HOLD SET TO RESET Press and hold the SET button until 100% is displayed. You will hear three chimes and the “CHANGE ENGINE OIL” message will go off. Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Good luck

Nov 10, 2009 | 2001 Pontiac Aztek

2 Answers

Change oil light stays on


Using the black push button/rod, you know the one where you can switch to see trip A trip B etc?
keep pushing it til you get to the check engine part then it will cycle through several things. when you find the right place it will read "if new oil hold reset" at this point just hold reset. That is the black push button/rod.

If this don't work, try it again, sometimes it may miss...

Sep 08, 2009 | 2008 Ford Expedition

1 Answer

How do i reset the oil change light on my 2007 acadia?


{: ) If the vehicle does not have a Driver Information Center (DIC):
  1. Turn the ignition to ON, with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds.
  3. Turn the key to OFF.
  4. If the CHANGE ENGINE OIL SOON message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.
If the vehicle has a DIC:
  1. Turn the ignition to ON, with the engine off.
  2. Press the MODE button until the DIC reads OIL LIFE LEFT/HOLD SET TO RESET.
  3. Press and hold the SET button until 100 percent is displayed.
  4. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
  5. Turn the key to OFF.
If the CHANGE ENGINE OIL SOON message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.

Jul 10, 2009 | 2007 GMC Acadia SLE

1 Answer

Service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to...


oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 08, 2009 | 2004 Buick Rendezvous

3 Answers

How do I reset the "Oil Change Warning Indication" on colorado


if you have a owners manual read it. try coloradofans.com website and search the forums. i think johnny5846 is right if you don't have a DIC (driver info center). i believe you use the DIC(tripodometer). i don't know the sequence off hand, you can also you can change your lock settings and alarm settings, etc. with the DIC.

Jan 13, 2009 | 2006 Chevrolet Colorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...