Question about Cars & Trucks

Open Question

The number "1" appears in the read out, the lights don't work and nothing I do will change the read out from the number "1"...

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake lights work but my tail lights and reverse lights don't work. Also my dash lights quit when I changed the switch for my headlights.


Check your fuses. I had the same problem with a 90 Honda civic. Dash lights went out, tail lights also went out. Replaced 1 fuse and all came back on.

Jan 11, 2013 | 1996 Dodge Neon

1 Answer

Changed o2 sensor engine light went off but came back on


I don't know if you have reset the computer but if not take one battery terminal off for about 5 minutes and that will reset your computer. If you don't have anymore problems it should not come back on.

Aug 20, 2012 | 2000 Ford Windstar

1 Answer

Golf mk4 hazard lights don't work


Had the same problem, check your fuses, my was out, changed it, works good Good luck

Jul 08, 2012 | Volkswagen Golf Cars & Trucks

2 Answers

I changed the battery in my 2001 Toyota Sienna and now my radio won't work.


Press station 1 and 6 and turn the ignition key to on position but donot start the vehicle, you will see the unlock code flashing, note the number that is your radio code, read your vehicle manual and insert code to unlock.

Aug 11, 2011 | 2006 Toyota Sienna

3 Answers

How to reset timing belt warning light after 150,000 km on toyota hiace 2kd-ftv engine


if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again

Apr 02, 2011 | 2007 Toyota 4Runner

1 Answer

I just bought a 2004 Cadillac CTS without navagation and can not figure out how to set the clock. Owner's manual doesn't offer solution.


This worked on my 04 CTS. This is a CTS without the GPS.

1) Turn key to On or Accy
2) Wait for the radio/clock display to load up.
3) Push the Tune/Select button at the lower right of the radio display. Nothing will appear to change.
4) There is a button to the right of the radio diplay with two horizontal lines on it. Push the lower of the two horizontal lines. The clock set option should appear.
5) Turn the Tune/Select button until the time is correct.
6) Push the Tune/Select button to lock the time in.

Hope this helps.
Don

Mar 28, 2011 | 2004 Cadillac CTS

1 Answer

When i changed oil i forgot to follow the corect proceedures,so now i reading in dashboard of my car . change oil soon . later i follow the proceedures in cataluge , but same sentence appear pls. advise


this light is triggered only by miles. you will probably need to go to the dealer to reset this light. in the meantime try this: 1. Turn the key to the "ACC" position which is the notch that allows power but doesn't turn the engine.
2. The display will read change engine oil soon - hit the display button(i) and the display will read 0% oil life.
3. Hit reset button (the check mark button) for 5 seconds and the display will change to 100 % oil life.
4. It may not work the 1st,2nd,3rd .... attempt , but will work eventually.

Nov 09, 2009 | 2007 Suzuki XL-7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...