Question about Cars & Trucks

Open Question

Adjust time on my tissotl890/990k - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set timing from scratch on 2004 astra, I changed timing belt water pump and all pullies. Timing is out. Thanks in advance.


what engine is fitted? did you get a new timing belt adjuster. did you set it to new and not old. ecotec timing marks are on the cover and inside the cam cover. lower timing marks are on the pulley and on the crank. this should line up with the sump case marking on crank and the pin on the engine on the pulley. you need to rotoa the engine at lest 3 times to check the position of the time. also if you have had the cam sprockets off are they on the right ones as this would make timing out. both cameras are set different, there should be markings on the cmes to say inlet and exhaust. same on the cogs. when adjusting the time rotte engine by hand 3 times and if out on the timing and out of new adjust again until each time you rotate the engine it all lines up. adjustment is best done with the pull off. rota adjuster are anticlockwise to adjust dont do this clockwise, as it will move over time away from the stop pin and cause damage to the engine or timing adjuster.

Apr 19, 2018 | Cars & Trucks

1 Answer

How to Adjust Timing?


Most newer vehicles do not have a timing adjustment as the computer does timing adjustment.Older vehicles do have a timing adjustment you can do.Do you have more info on the vehicle in question?

Oct 13, 2016 | Cars & Trucks

1 Answer

What is the timing setting?


The timing setting is a mechanical adjustment that synchronizes the position of the piston in the cylinder to the firing of the spark-plugs to produce combustion in a fuel burning engine. Most modern vehicles use sensors and a computer to control the actual timing for each firing of each cylinder. This allows the computer make adjustments to the actual time the spark plug in each cylinder fires and for how long to achieve maximum efficiency and fuel mileage. Even though the computer can make adjustments the engine still needs to be set up to a certain trimming spec so the computer can do only the fine adjustments as needed. Most engines require this timing settling adjustment to be done with the engine running BUT WITHOUT the computer adjusting the timing automatically. To do that the mechanic will follow a procedure that puts the computer in a OPEN condition causing it to only operate the engine in default settings and not make any adjustment based on sensor input. This allows the BASE timing to be set manually. After, the computer is returned to it's active CLOSED LOOP status for future driving.

Mar 19, 2016 | Cars & Trucks

1 Answer

How to adjust timing chain 2003 honda accord


the timing chain is adjusted by an oil pump chain tensioner and is to be renewed at each chain replacement. from this it is hydraulic adjustment and is automatic and does not require manual tensioning

Jan 06, 2015 | 2003 Honda Accord

1 Answer

How to adjust timing belt


The Timing is computer controlled. You would need a computer with the Dodge factory interface and the connectors that hook it to your car to adjust the timing. If the timing belt has been changed and it was installed a tooth or two off it will need to be removed and installed correctly.

Jul 20, 2014 | 2000 Dodge Intrepid

1 Answer

How to check engine timing on V6 3.3L Cutlass Ciera Oldsmobile?


cannot adjust or check engine timing it is not adjustable
it's a c3i coil and module system
there is a timing on timing chain adjust with mark
and advance timing is done with module

Oct 17, 2013 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

How do you change the time on a 2004 Hyundai Getz?


hello on the instrument cluster (where the speedo is) there is a button with 'H' & 'M' turn either way to adjust hours and minutes to the coreect time. The longer you hold the button the faster it adjusts. when it gets near to correct time just turn it once for step adjustment.

Jun 02, 2012 | Cars & Trucks

1 Answer

I need the required valve & inyector clearance on a M11 engine


Cummins M11

Intake valve clearance 0.010 inch
Exhaust valve clearance 0.024 inch

The firing order is 1-5-3-6-2-4 and that is the order the valves should be adjusted started with first timing mark on main pulley adjust cylinder number 1 The valves and injector should be adjusted at the same time The crankshaft is then rotated 120 degrees to next timing mark and cylinder 5 is adjusted, the crank is rotated again 120 degrees to next timing mark and cylinder 3 is adjusted.then back to the first timing mark, cylinder 6 is adjusted, etc/

Adjusting nut on plunger should be adjusted to the point where you feel the plunger just reaches the bottom.of travel/bottoms out.

Feb 15, 2012 | Cars & Trucks

1 Answer

Timing belt tensioner


On the Rio 2002, the tensionner is only used to apply pressure to the timing belt (installation) and cannot be adjusted. Once install the tensionner is "auto adjust" using a spring. If you need to adjust it,may be it time to change the timing belt KIT. Around 60,000 M.

Aug 31, 2008 | 2002 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14264 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...