Question about Infiniti G

1 Answer

A Nissan mechanic told me if a part, which may have faulty components, is placed on the front suspension, then there is a 350 kilometre running-in time before any movement and then the problem would be diagnosed. I am not sure of the standard of practice concerning some of these mechanics as the car is only as good as the mechanic or company (unless the car is beyond repair and I am sure that this would not be the case for most road users).

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

I do not know of any pat for front end that would need a run time, there is a possiblity that the rack and pinion would need to be tested after a short time to make sure it is not loose but I would like to know the name of the part that has to be ran 350 K's before it can be tested. As a mechanic it sounds fishy to me, but I would need to know the part he is talking about before I could tell you for sure.

Posted on Jul 21, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

Ford explorer eddie bauer 1998 front passenger tire bald in one spot what causes it

Doreen, the radial belt has become faulty, replace tire immediately.

Mar 07, 2016 | 1998 Ford Explorer

1 Answer

Hi there i have got nissan 200sx s15 2001 .my car

your left brake caliper might be suck in the closed position like you brake is on. jack the car up and see if you can spin the tire if it spins freely then you good you might just need an alignement

Sep 11, 2014 | Nissan 200SX Cars & Trucks

1 Answer

Ineed exploded veiw of front suspension for nissan

You can find a detailed view of front suspension of Nissan Skyline R32 at this link: Nissan Skyline R32 Front suspension

Sep 16, 2013 | Cars & Trucks

2 Answers

What can be done was told ther is no adjustments in front end of my car for alignment

all cars has to be align at a long period of time if you getting quick tire wear, the mechanic told you a story, only reason a vechicle cant aligned if front end been or side vechicle been in a car wreck or if you have severe worn suspension components it would be hard to adjust the camber or caster wheel alignment.go to another garage that do front end alignment.

Sep 09, 2012 | 1995 Lincoln Continental

1 Answer

Very high fuel consumption on a nissan vannete cargo 1996 45 liters for 350 kilometres is it normal ?

For sure the fuel consumption if very high specially if you are a moderate driver and do not drive at very high RPM. Now the possible areas to check must be the fuel pump calibration and the timing. If this is out of order/settings then the fuel can be wasted without utilization which can result in high consumption.

Apr 26, 2011 | 1996 Nissan Maxima

1 Answer

Kia rio 2003 -what are control links and d-bushing

These are front Suspension & Steering components. Ignore these repairs at your own & unfortunately MY OWN risk

Oct 28, 2009 | Kia Rio Cars & Trucks

2 Answers

Allroad 2003 Overnight the suspension sinks.

air bag or line has a leak they usually corrode and leak around fittings at bag

Aug 26, 2009 | 2003 Audi allroad

1 Answer

Detection of faulty parts

Not really. You just have to use common sense. If the original part did not fix the problem, or the problem came back, it should of had a warranty on it. There is no such thing as a running in time on a suspension part. Maybe they aren't replacing the problem part, and you need something else?

Jul 23, 2009 | Nissan Pulsar Cars & Trucks

1 Answer

How would I install an upper suspension arm to

nissan primera in the US is called an Infiniti G20. the grinding or knocking if its coming from the front, is gonna be the tension rod bushings are warn out. get new tension rods for real cheap. thats all i can help with, suspension is my thing, motor is not.

Jul 16, 2009 | 1995 Nissan 200SX

1 Answer

Nissan Suspension noise

sounds to me like your front control arm bushings are broken. have your mechanic check the bushings in rear of the control arm. the ones that are right by the 3 bolts in the control arm in rear. those bushings brake and cause play in the whole assembly, causing a rattle. Its a black round bushing about 2 inches in diamater. its most likely all separated. common problem. Have him look at your stabilizer bar links also.

Sep 01, 2008 | 2001 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts


Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14417 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides