Question about 2006 Hyundai Matrix 1.6

Open Question

2006 hyundai matrix/lavita/inokom 1.6 dohc right hand drive

A video or step by step instructions to change timing belt.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 114 Answers

SOURCE: how to increase fuel consumption on hyundai matrix/lavita 1.6 dohc ?

Tire pressure/tune up/ use the cruse control ..

Posted on Dec 17, 2016

alicantecoli
  • 22095 Answers

SOURCE: what does hyundai matrix/lavita 1.6 dohc fuel filter and fuel pump look like ? when does one replace that bag at the bottom of the fuel pump housing?

the pick up filter ?? never its that simple unless you have had sugar put in the fuel tank

Posted on Dec 17, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where to place car stands under yundai matrix/lavita 1.6 dohc ?


under the jacking points or any part of the chassis ,not the floor pan

Dec 17, 2016 | Cars & Trucks

1 Answer

How to increase fuel consumption on hyundai matrix/lavita 1.6 dohc petrol


would you not mean decrease fuel consumption meaning to make it go further for the same amount of fuel
to increase fuel consumption
be heavy footed at lights , speed , overload, run on partially flat tires stop/ start , be heavy on the brakes

Dec 17, 2016 | Hyundai Cars & Trucks

1 Answer

WHERE IS THE SERPENTINE BELT LOCATED ON A 2003 HYUNDAI SONATA


Vehicles Covered: Hyundai Sonata 2002-2004 (2.4L & 2.7L Engines)

In 2003, Hyundai produced two types of Sonata:
Available engines:
4 Cylinders 2.4L VIN "S", MFI DOHC - see Figures 1 and 3.
6 Cylinders 2.7L VIN "H", MFI DOHC - see Figures 2 and 3.

To differentiate between these types of 2003 Hyundai Sonatas, the VIN 8th digit (Engine Type) will either be "S" or "H" as in the table above.

To locate the Engine drive belt, jack up the vehicle & place it onto jack stands, then slide under the car (toss a cardboard mat down first), then, once under the car, remove the (plastic) engine splash shield. Once removed, the drive & accessory belts are easily observed.

12_27_2011_5_25_29_am.jpg

Fig. 1 Accessory Drive Belt Routing 2.4L (4 cyl) Engine - Hyundai Sonata
The "COMPRESSOR" refers to the A/C compressor, and "GENERATOR" refers to the Alternator.


12_27_2011_5_27_01_am.jpg

Fig. 2 Accessory Drive Belt Routing 2.7L (6 cyl) Engine - Hyundai Sonata
The Belt Routing on the Left is "With A/C", on the Right is "without A/C"

Inspection - Drivebelt and Accessory Belts

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. Worn or damaged drive belts should be replaced.

Drivebelt Removal & Installation - 2003 Sonata (2.4L and 2.7L engines)

Raise and support the vehicle.
Remove the engine splash shield.
Rotate the drive belt tensioner clockwise to release the drive belt tension.
Remove the drive belt from the alternator.
Slowly release the drive belt tensioner.
Remove the drive belt from the accessory drive pulleys.

To install:

Install the drive belt to the accessory drive pulley.
Rotate the drive belt tensioner clockwise.
Install the drive belt to the alternator.
Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
Slowly release the drive belt tensioner
Install the engine splash shield.
Lower the vehicle.

Here's the best illustration I can find of the Hyundai 2.4L and 2.7L engines - the drivebelt seems to be located on the passenger side of both of these transversely mounted engines.

12_27_2011_6_03_16_am.gif

Fig. 3 Hyundai 2.4L and 2.7L engines - Underhood sensor locations 2002-2004 only

Glossary of Acronyms
---------------------------------
A/C - Air Conditioning
DOHC - Dual Overhead Cam
MFI - Multi-port Fuel Injection

Dec 25, 2011 | Hyundai Motor 2003 Sonata

1 Answer

Does one have to change the timing belt of a Hyundai tuscon 2006 model. I


Scheduled Maintenance Services, for most Cars, has to be done at 30K, 60K, and 90K. Hyundai dealer recommend to replace the timing belt at 60K Service.
If you wait, one of two things could happen: Nothing, or the belt could break and you would be out thousands to repair the engine instead of a $400 hundred to replace just the belt. If it breaks, there will be damage done to the valves and various other internal components, which will not covered under warranty. The problem is that the Dealer would charge you between $700-$800 because they would also replace the water pump at the same time. Or you can buy the timing belt and change it by your self. To do so, you nee the Haynes Repair Manual specific for your car another equivalent.
2006 HYUNDAI TUCSON GLS 2.7L 2656cc V6 FI (D) DOHC : Engine : Timing Belt

9faaa22.jpg

Oct 29, 2010 | Hyundai Tucson Cars & Trucks

1 Answer

How do set the timing on hyundai excel 1998


Hi,


It seems you are encountering problems trying to set the timing marks in your elantra,not to worry,simply follow the stepwise solution below;
Ensure timing marks aligned [6] & [7] .

STEP 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets.

STEP 2. Slacken tensioner pulley bolt [8].Push tensioner pulley firmly against timing belt to tension belt.



STEP 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm.


STEP 4. Except Matrix: Turn crankshaft one turn clockwise.



STEP 5. Matrix: Turn crankshaft two turns clockwise.


STEP 6. Ensure timing marks aligned [6] .


STEP 7. Apply a load of 2 kg to belt at .Belt should deflect 4-6 mm. If not Adjust position of tensioner pulley.



STEP 8. Install components in reverse order of removal.


STEP 9. Tighten crankshaft pulley bolt [2] . Tightening torque: 170-180 Nm
(7) is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head (6) is crank timing mark,pin mark on crank lines up with markS on block.





Good luck.

Aug 20, 2010 | Hyundai Excel Cars & Trucks

1 Answer

I have a 2006 hyundai santa fe i have 54780 miles on it i have noticed lately my gas mileage is going down bad from 15 to 16 to 13 and my driving habits have not changed and how hard is it to change the...


The timing belt is not easy but the regular tune up anyone with basic hand tools can do.Plugs and wires,fuel and air filter and perhaps an oil change and your good to go.Timing belt should be done by som eone with experiance.

Oct 31, 2009 | Hyundai Santa Fe Cars & Trucks

Not finding what you are looking for?
2006 Hyundai Matrix 1.6 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...