Question about Toyota Cars & Trucks

Open Question

Ops 1985 Toyota pickup 22re torque specs. Flexplate to torque converter. Help

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the torquing specs for a water pump on a 1992 Toyota pickup with a 22RE engine


the water pump bolts torque specs is T=1.85 kg-m (13 ft-lb). you must set your torque wrench nicely and carefully not to break the bolts then there you go.

Apr 03, 2016 | Toyota Cars & Trucks

2 Answers

I replaced my 1985 22r engine with an 22re engine,using carb off old engine. do i have to also replace my distrubutor and coil/igniter


repost with the spec differences beween the two engines Im a bit foggy here..Im thinkin one had or has intake restrictor plates under the intake for not letting hot gasses enter under the carb mount...

Jan 17, 2013 | 1985 Toyota Pickup

2 Answers

I need tips on installing a fresh 22RE motor into the auto matic transmission. It lacks about 3/4 from going in all the way. What is it hitting on? Thanx


It is hitting the transmission converter "tangs" as they call it. Spin the torque converter a few degrees at a time until it slips in place. do not force it in.

Jan 05, 2011 | 1992 Toyota Pickup

3 Answers

I have a 1985 toyota pickup (fuel injected)with a 22re engine, it will run on starting fluid, when i spray it but it wont run otherwise, just put in a new fuel pump, thanks for youre help,


Alright, i have a 1987 Toyota 4x4. it has a 22RE full injected motor..it was able to run, but it was running rich, and idling pretty eratic..and then now..it only starts up..and dies. after like 5seconds. 

Jun 15, 2010 | 1985 Toyota Pickup

2 Answers

What are the torque specs for a 1986 toyota pickup?


Ummmm....torque specs are listed for lots of bolts and things, so you'd have to be more specific.

Aug 30, 2009 | 1986 Toyota Pickup 4WD

2 Answers

Need diagram of fuel injection for 85 4x4 22re


Sounds like you have a vacuum leak somewhere. There may be a stop adjustment on the throttle body, but usually high idles are due to unmetered air entering the system.

Jul 14, 2009 | 1985 Toyota Pickup

5 Answers

Need to change engines


If you have a 22r carbed then all 22r carbed engines from 1981-1995 will interchange. You may need to use sensor out of your old engine however. The 20r,22r,22re,22ret all have the same mounts and tranny bolt patterns. how ever there are lot of differences. you can swap from a 22r to a 22re but you must also swap the entire vehical wiring harness to do it right. if you have a 3.0L i would keep the same engine. some people have swap to the tacoma 3.6L but that is a expensive swap not exsactly bolt on so to say. If you have a 22re then stay with the 1986-1987 22re because the newer 22re use different computers, electronics ,sensors and more.. Same story with the 22ret. I hoped this helped.

Mar 26, 2009 | 1987 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...