Question about Cars & Trucks

Open Question

I've got a centurion D5 gatemotor .The gate will open and closed by itself .What can it be

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 74945 Answers

SOURCE: Need to program Nova remotes on a Centurion D5 Motor

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory systems .
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Posted on Oct 09, 2012

  • 253 Answers

SOURCE: gate light on even when gate is closed

Open gate and find where the wiring enters the gate (bottom of door) pull back the rubber insulator and check for broken wires or wires touching each other.

Posted on Mar 05, 2013

  • 40672 Answers

SOURCE: Trouble shooting Centurion D10 gate motor

look for a loose wire and faulty earth check for wires shorting out to earth

Posted on Jul 15, 2013

Testimonial: "Can you advise me how to check for a wire that may be shorting to earth? I disconnected the battery terminal and switched off the mains and then re-connected and seems to be working ok now but for future reference and just general knowledge I would like to learn how to test for a shorting wire. I have a multi-meter."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail Gate open warning light will not turn off. where is the button switch on the tail gate?


Check with a multi-meter that the switch itself has a open/closed function(ohm meter setting)Hope this helps....

Feb 06, 2015 | 2005 Hyundai Getz 1.3

1 Answer

2011 surburban lift gate not working


Does it still have the tailgate lift cylinders? The power tailgate lift is designed to work with the cylinders,but it won't work if the cylinders have lost their pressure.

Aug 24, 2014 | Cars & Trucks

1 Answer

Trouble shooting Centurion D10 gate motor


look for a loose wire and faulty earth check for wires shorting out to earth

Jul 14, 2013 | Cars & Trucks

1 Answer

Where is the gate open indecator switch located on 2010 dodge grand caravan


The switch in on the latch itself. When the striker goes into the latch it also trigger the small micro switch.
You can try something like WD40 and spray liberally into the latch and open close it 10 times or so to see if it frees it up.

Jan 23, 2013 | 2010 Dodge Grand Caravan

1 Answer

My Centurion D5 will intermittently reopen the gate immediately after I close it. The LED lights flash 4 times which I believe indicates an obtruction but there is no obstruction. Any thoughts as to w


Hi there. The symptoms you describe as well as the error indication (4 flashes) certainly do seem to indicate an obstruction. Try disengaging the gate, moving it back and fourth and feeling whether it sticks at any particular point. Possible causes could be: dirt or stones on the rail, bad rack joints, missing teeth in the rack, worn wheels or guide-rollers or a damaged rail. You can also try decreasing the collision sensitivity (I can send you an email with the info if you like), but please be advised that this makes the gate less sensitive to an obstruction and could pose a risk. How old is the motor, if I may ask?

Nov 27, 2012 | Cars & Trucks

1 Answer

Need to program Nova remotes on a Centurion D5 Motor


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory systems .
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Oct 09, 2012 | Cars & Trucks

1 Answer

Rear door does not close


Look at the door's locking mechanism. Is the Latch Gate in the down position? Is the Door Mechanism properly tightened to the door? These are Torx/Hex head bolts. Tighten these if needed.
If the Latch Gate is down:
1. Unlock the door.
2. Lift up/out on the Door Handle as if you were opening the door.
3. Use a screwdriver to lift the Latch Gate so it lifts the Gate up and out of the way.
Alot of these Gates have plastic coverings that sometimes split and stick or cause the door mechanism to jam. Inspect the Door Mechanism for anything that could be causing it to jam. Using a pair of needle nose pliers remove any of this split plastic (if so equipped) pulling as much of it off the Latch Gate.
Use WD40 with the red spraying hose on and stick it as many openings you can and lubricate as much of the Door Mechanism as you can.
Check the operations (plural) of the Door Mechanism, Opening and Closing the Gate using the screw driver to push in the Striker Gate causing the Latch Gate to rotate back down into position. Repeat... checking for the Latch Gate to Release Up (on it's own) when you "open" the door. If it doesn't, then there is either jammed or a return spring is broken.
Have you dented or distorted the Door and / or Door Mechanism in the process of trying to slam the door close? You will have to either bend the the door area back to as close to possible the original shape. Use the other door on the other sides as a guide on this. You may have to replace the Door Mechanism itself, as when they are malfunctioning and are slammed (over and over) it could break the Mechanism itself. If the Mechanism is broke, you will have to remove and replace the entire mechanism.
Let me know if this helped, or if you have additional information of questions. Feel free to conatct me at FixYa.com!

Jan 17, 2010 | 2005 Saturn Relay

2 Answers

I have a 2007 yukon and the lift gate goes up about half way and returns to the closed position. What is going on?


try removing your shocks/struts for the lift gate. once removed, check to see if they fully extend in and out of the barrel. You may have bent shocks/struts. Also, check to see there is nothing preventing the lift-gate from opening such as a bolt or acorns between the spoiler and the roof...

Jul 17, 2009 | 2007 GMC Yukon Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...