Question about 1997 Jeep Cherokee

1 Answer

1997 Jeep Cherokee stuck in reverse - 1997 Jeep Cherokee

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Post 2 times, why?
why not say, this,
my shift lever shows.
PRNDL (this is called and automatic)
drive is dead, low is dead, Reverse works. only.
in drive its reverse,
in low its reverse.
this can be a simple bad ,dead shift cable.
all it takes is looking at end of cable to find this truth, 2 persons, 1 shifts, other LOOKS. bingo.
or not. if not the cable the box is toast.

or
this is called a manual transmission. a stick.
gear 1,2,3,4,5,fails, but R, reverse is all i get out of my manual trans, (rare is hens teeth but fixed many like it) bad shift rails, or detents.

Posted on Dec 29, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1997 Jeep Cherokee want shift outta reverse


is it too much to ask
is trans auto or manual?
mine manual.

try to know all cars are not all the same.
some are 2wd, others are 4wd,
autos and sticks.
count those 4 permutations. there.

wild guess, 2wd jeep
XJ jeep 97 < same as my mail lady uses.
has a/T
the cable is broken from shift lever to box.
or worse. looking at the cable , is a top idea.

Dec 29, 2016 | 1997 Jeep Cherokee

1 Answer

98 jeep cherokee sport reverse lights have no power


lamps good,
fuses good. in fuse boxes.
so the reverse switch is bad.?
on the A/t car this switch is called the PRNDL switch prindle.
if the R contact goes bad (as the all do) the lamps go dead.

Mar 01, 2014 | 1997 Jeep Grand Cherokee

1 Answer

Need to replace power steering hose on 1997 Jeep Grand Cherokee


Unscrew hose on both ends. Remove hose. Reverse procedure to install. Fill and bleed power steering system.

May 04, 2012 | 1997 Jeep Grand Cherokee

1 Answer

My 1997 grand cherokee has no reverse, but when you put it in park it appears to be in both park and reverse ???


Have an auto parts store pull the trans codes for free ask first. Then see if it is a part you can change

Aug 25, 2011 | 1997 Jeep Grand Cherokee

2 Answers

Back up lights don't work see them start when going in neutral but lose when in reverse. 1997 jeep Cherokee country 4x4


Neutral Safety switch out of adjustment or defective, located on shift linkage LEFT side of transmission.

May 17, 2011 | 1997 Jeep Cherokee Country

1 Answer

My 1997 jeep grand cherokee is stuck in 4WD. any suggestions


try putting into 2 wheel drive and reverse jeepa couple of yards might come out for you then

Apr 20, 2010 | 1997 Jeep Grand Cherokee

2 Answers

Where is the pcm located on a 1997 jeep cherokee


Removal & Installation
  1. Disconnect the negative battery cable.
  2. Remove the coolant reserve tank and disengage the three electrical connectors from the PCM.
  3. Remove the three PCM mounting bolts and carefully remove the PCM.
  4. Installation is the reverse of removal.

Apr 18, 2010 | 1997 Jeep Grand Cherokee

1 Answer

The central locking system on my jeep Cherokee sports 1997 keeps blowing the 30A fuze but only during the lock cycle. It doesn't occur during unlock?


One leg of the 2 wires connecting to the various door servo's most likely has a short to ground.
Ensure neither leg is permanently grounded.
(The battery feed polarity to the servo motors is reversed by the controller so they run forward (/ reverse), to lock (/ to unlock))

Aug 03, 2009 | 1997 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...