Question about 1987 Chevrolet Monte Carlo

1 Answer

Have a 1987 Monte Carlo SS that has had all the emissions sensors, mounting brackets, vacuum lines, and wiring removed. Would like to find diagrams and parts needed to put it back as designed by GM.

Is an assembly manual available that would list OEM part numbers and contain diagrams for a project like this?

Posted by on

  • yadayada
    yadayada Dec 28, 2016

    It is called a factory service manual, we would not have that info here.

  • Mike Rhodes
    Mike Rhodes Dec 29, 2016

    Thank you for the response. I'll keep looking.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 40,800 Answers

Near impossible to get all the information you require as it would be on the factory build sheet
closest you will get is a genuine workshop manual as it will show where the parts go , what they are called but as to parts numbers --no
you may get some help if you talk with a service dealer spares department as they may print out the parts schematics for you which will give you part numbers and where they are located

Posted on Dec 29, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bumper diagram front


Are you serious? What other possible solution are you looking for this is a monte carlo you either go find the bracket or you put on your redneck gear and grab some bondo (not suggested....)

Apr 20, 2014 | 1987 Chevrolet Monte Carlo

1 Answer

1987 Chevy SS Monte Carlo. What tool do you use to remove the valve covers?


Sockets and rachets. If you can't get a socket and rachet on the bolts, then you will have to use a closed end wrench or a box wrench sized perfectly to the head of the bolts.

Aug 08, 2010 | 1987 Chevrolet Monte Carlo

1 Answer

Serpentine belt diagram for 1987 monte carlo ss


The link below will take you to a page with several diagrams. Your car has 4 different engine sizes but you should find the appropriate diagram on this page. Best of luck.
Greg

87 Monte Carlo

Dec 18, 2009 | 1987 Chevrolet Monte Carlo

4 Answers

Where is the fuel filter on an 87 ss monte carlo


Hi,

It would be - Under hood, center, upper engine area, front side of engine block, mounted in fuel line .

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Oct 07, 2009 | 1987 Chevrolet Monte Carlo

1 Answer

Can you find an engine diagram for an 02 chevy


That is the water pump bypass/heater hoses you have to get them from the dealer, they know the ones. They are plastic and you should replace both and make sure you get all the pieces out as they will break when removed.

Aug 02, 2009 | 2002 Chevrolet Monte Carlo

1 Answer

ABS and Traction control warning lights come on independtly and jointly. I believe the problem is the hub mounted sensor. How do I replace it.This is on a 2003 Monte Carlo SS.


hi if you know for sure it's a wheel speed sensor
remove that wheel
remove the caliper and caliper bracket
remove the brake rotor
there are 3 bolts on the other side of the knuckle(13mm)
remove them
remove the axle nut(1 5/16)
remove the hub bearing assembly(you may need to use a hammer on the hub flange)
hope this helps

May 25, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

Mass air flow sensor bad on 2002 monte carlo ss


It's should be a simple remove and replace. Just make sure the engine is off. Also do not touch any of the filament wires on the sensor, just the plastic housing. Also after you install it drive the car for a little while (city speeds, cruising speeds and inbetween). That way the computer will be able to readjust its setting since it is a new sensor.

Apr 02, 2009 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
1987 Chevrolet Monte Carlo Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...