Question about Cars & Trucks

Open Question

Rteplace 92 convert 2002 brake ligh - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When driving this 2002 4-cylinder, engine stalls when brakes are applied. what's the problem


My first guess would be something involving the power brake booster.
But if it is an automatic it could be the torque converter.

Jan 29, 2014 | Cars & Trucks

1 Answer

1999 toyota camry ce brake warning light stay on. in dash wen i hit the pedal, all lights work.


Check your brake fluid if low have your brakes checked. The brake ligh on the dash stays on if fluid is low or if there is a pressure differential (leak).

Jun 13, 2012 | 1997 Toyota Camry

1 Answer

I have a 92 cadillac allante it will not crank and was a anti theft lighe flashing


try the spare key and if that doesnt work take it on a tow truck to the dealer

Apr 19, 2011 | 1992 Cadillac Allante

1 Answer

Hit brakes and back up lighs come on, just rewired truck and boat wires from the wires that were there. truck had blue and darker green wire connected at truck (not going to 4 wire connecter)


These vehicle have all tail light in circuit to the rear lights. You must purchase and install a trailer light conversion kit from a local parts store, not hard wired in anymore. The converter will plug in at the rear taillight harness at the frame area left of spare tire and no other wiring is required. These kits can be purchased at any part store for $30 to $40 and work very well. Hope this helps.

Jul 28, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

99 BUICK LESABRE TURN SIGNAL MALFUNCTION


I had the same exact issue.
I had to buy a new multi-function switch for 200 dollars
and put it in.

May 09, 2009 | 1999 Buick LeSabre

2 Answers

2002 pt cruiser light problem


If the fuse is good, and they light up with the turn signals and brakes, it is most likely in the switch itself. Something is not making good contact.

Mar 07, 2009 | 2003 Chrysler PT Cruiser

1 Answer

Can't get my brake drums back on my '92 Ford F150.


You need to rotate the starwheel brake adjuster inward, to let the shoes come together. Then, you can slide the drum back on. You will need to readjust the starwheel again, after the drum is on, to obtain the proper position for the new brakes.

Feb 25, 2009 | 2002 Toyota ECHO

1 Answer

2002 jaguarxj8


if you replaced bulbs recently with cheap ones the warning will come on.

Jan 18, 2009 | 2001 Jaguar XJ8

1 Answer

92 ACCORD IS RUNNING ON 3 CYLINDERS AND ITS NOT PASSING 4000 RPM


suspect the cat converter is duff, check and replace, usual reason for your problem, cat gives off a lean mixture, explains the engine running on and poor performance from the engine

Jan 08, 2009 | 2002 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...