Question about Ford Escape
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !
Posted on Dec 30, 2008
press and release the setup button to display oil life= xxx
then press and hold the reset button for about 2 sec it should then display oil life set to 100%
Posted on Jan 30, 2009
If you have the optional message center it is on page 144 of your owners manual.
Press and release the SETUP
control to display “OIL LIFE =
XXX% then HOLD RESET = NEW”.
If you have the standard message center this begins on page 126 of your owners manual.
Posted on Apr 03, 2009
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
Posted on Apr 13, 2009
To reset your maintenance reminder system (even if the light hasn’t come on yet), you’ll need to turn your key to on (but don’t start!) and make sure your odometer is on TRIP A. Then key off. Press and hold the Odometer/Trip button. While holding down on the button, key the ignition to on (Don’t start the engine!) The display panel will count down from “------“ to “-“Continue pressing the button until the Trip A is displayed. After this step, you are done.
Posted on Oct 21, 2009
Tips for a great answer:
Sep 29, 2014 | Ford F-250 Cars & Trucks
Jun 06, 2014 | 2008 Ford Taurus X
Nov 15, 2011 | 2008 Ford Escape
Oct 01, 2010 | 2009 Ford Escape Hybrid
Mar 16, 2010 | 2008 Ford Escape
Mar 14, 2010 | Ford Escape Cars & Trucks
Apr 03, 2009 | 2008 Ford Expedition
Dec 30, 2008 | 2008 Ford Escape
Sep 25, 2017 | Ford Cars & Trucks
43 people viewed this question
Usually answered in minutes!