Question about 1996 Mitsubishi Eclipse

Open Question

How to replace front signal light on 1996 Eclipse. Does all housing need to come off?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dttech
  • 4803 Answers

SOURCE: How do I replace the fog housing on a 2005

No. You can get to the fog lamps by removing the plastic under-covers from the bottom of the bumper facia. They are held in place with a bunch of plastic clips. Once the covers are removed, you will see the back side of the fog lamp assemblies where you can access the four mounting screws.

Posted on Apr 14, 2012

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove front bumber 1996 honda accord-lx


There will be a number of smaller screws around the outside of the bumper, like in the wheel well and under the car by the splash shield under the engine. All of those will need to be removed. Then you need to remove the turn signal lights in the front bumper with a long phillips screwdriver. Take a flashlight and look inside the bumper through the lower grill at the side of the turn signal housing. You'll see a small hole for the screwdriver. The screw doesn't need to come all the way out to remove the light.
Remove turn signal housing on both sides and look back at the frame crossmember behind the bumper. There are two large bolts on each side holding the bumper on. You'll need some extensions to reach them. Once those are out, you'll be able to tell if you missed any smaller screws/clips.

Mar 24, 2014 | 1996 Honda Accord

1 Answer

Water in front parking lights


If the light housings are cracked , replace them. To get the water out of the light housings, park your car facing the sun and remove the bulbs from the housings. When the housings are dry simply put the bulbs back in. Be careful to wash off the bulbs with a clean drying alcohol before reinstallation. The oil from your fingers, grease,etc. can shorten the life of a halogen bulb.

Oct 01, 2011 | 2003 Mitsubishi Eclipse Spyder

1 Answer

I have a 98 eclipse. I was putting new tail lights on and then the signals stopped working along with the brake lights. the fuse to the brake lights had burnt so I replaced it. The signals however are...


IF THE TURN SIGNALS STILL WORK IN THE FRONT, THAT MEANS THE FUSE & THE FLASHER ARE OK. IF THE SIGNALS DON'T WORK AT ALL CHECK TURN SIGNAL FUSE & STOP / BRAKE FUSE. ARE YOU SURE THE CORRECT BULBS ARE BEING USED?

Jan 24, 2011 | 1998 Mitsubishi Eclipse

1 Answer

I need to replace my front indicator bulb on my Nissan Sentra


should be 1 silver phillips head screw on the corner light housing where the housing meets your front headlight housing. once you take that screw out, pull the corner light housing straight towards you, like towards the nose of the car, unclup the harness for the light bulb and your good to go

Nov 20, 2009 | 1996 Nissan Sentra

2 Answers

Need replace turn signal bulb


YOU HAVE TO THE FRONT HEADLIGHT HOUSING TO REPLACE THE TURN SIGNAL BULB.

Aug 24, 2009 | 1996 Chevrolet Cavalier

1 Answer

CHaging signal light in a 96 Jeep Grand Cherokee


Review this info: ZJ-Secc-8L-Lamps (page Lamps 8L-5 and next)

Good luck, and rated me!!!


Aug 02, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Signal bulb replacement


you may be able to access the bulb housing under the hood. open the hood and look behind the turn signal for the bulb housing. once located, grasp the housing and turn counterclockwise about a quarter and then pull. be sure to replace wtih the same type/part number bulb.

Sep 25, 2008 | 1996 Mercury Grand Marquis

1 Answer

Need to install headlights on a 96 eclipse


there are 4 bolts. one on top, 2 on the back and one on the bottom. have you already removed the front bumper . if not it needs to come off.

May 22, 2008 | 1996 Mitsubishi Eclipse

Not finding what you are looking for?
1996 Mitsubishi Eclipse Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...