Question about Cars & Trucks

Open Question

How do you do the final step and does it cost to do the final step?

Posted by on

  • eric allen
    eric allen Dec 28, 2016

    Hi Sharon Bell, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the correct tension of the head bolts in a 1.3 Sierra


must provide year,still,when u buy the joint it must be provided with instructions,may have more than tension,is the order of tidining,u can have degrees and sequvence like wait 10 minutes between steps,run 1/2 hour before last step ,replace head bolts everytime u replace head joint etc...

ex:ford sierra 1.3
1983-1987

Torx type bolts
use new bolts,oiled
steps:
1.35-40nm
2.70-75nm
3.let it rest at least 5 minutes
4.Final 90?

Star type bolts can reuse

steps:
1.40-55nm
2.50-70nm
3.rest it at least 20 minutes
4.Final 73-83nm





25258697-waeehndgwa4fozde2uhq10lv-2-0.jpg

dnt forget good practice clean,verify head straight...etc
best regards

Oct 28, 2014 | Cars & Trucks

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

1 Answer

Hearing ticking noise from my 1993 isuzu rodeo. Tried oil changes, additives etc. Need to know step by step instructions on replacing lifters.


I had same problem with 99 Isuzu Rodeo LS 3.2 V6. Dealer couldn't find it and many, many other owners experienced same thing. finally found a post where a mechanic (non dealer) changed the idle air control valve. so i tried it, and after 3 years of dealing with the problem, it worked!!! part costs about $40 and very, very easy to change yourself. for the 99, its located in front of engine, so easy access. Good Luck

Feb 18, 2011 | 1993 Isuzu Rodeo

1 Answer

Dont start


i just went thorugh the same thing with my 1998jgc.i started with the crank positioning sensor ,then the cam positioning sensor,then i had the computer rebuilt(i would save this step for last mine cost 477 dollars),then a new battery and starter and finally a tune up.if you tell me what noises it is trying to make on start up i can give you a more spefic place to start repairs

Jan 24, 2011 | 1997 Jeep Grand Cherokee

1 Answer

97 jeep cherokee cuts out when you step on the gas. after a while it will not run at all. after it cools down it will start right up. Any ideas??


After spending Hundreds of $ and hours on trying to figure this out we finally broke down and went to the scrap yard and got a PCM for this car. It only cost about $30. Wish we would have done this a year ago!!!!

Aug 21, 2010 | 1997 Jeep Grand Cherokee

1 Answer

1998 FORD FESTIVA HEAD BOLT TORQUE SETTINGS & TIGHTENING SEQUENCE (1.5 LITRE ENGINE)


1978 - 1980 FORD FESTIVA 1.6L 65-70 Foot pounds (Final torque)
Torque sequence 9 3 1 5 7 8 6 2 4 10 Step 1: torque to 5 Ft/Lbs Step 2: torque to 20-30 Ft/Lbs Step 3: torque to 50-55 Ft/Lbs Step 4: torque to 65-70 Ft/Lbs Recheck final torque in sequence


1988 - 1993 F0RD FESTIVA 1.3L
Torque sequence front of engine 8 4 1 5 9 7 3 2 6 10 Step 1: torque to 35-40 Ft/Lbs Step 2: torque to 56-60 Ft/Lbs Recheck final torque in sequence

2011 FORD FESTIVA 1.6L NO TORQUE SPECS AVAILABLE THERE IS NO FORD FESTIVA MANUFACTURED IN 1998 ALSO NO FORD FESTIVA MANUFACTURED WITH A 1.5L ENGINE
HOPE THIS HELPS YOU

Aug 06, 2010 | Ford Focus Cars & Trucks

1 Answer

Does anyone have the bolt torque specifications for a ford 1995 5.8L. I need the cylinder heads, crankshaft mains and connecting rod torque.


Head bolts, 105-112 Foot pounds (Final torque)
Final torque must be reached in 3 equal steps. Recheck final torque in sequence.
Main Bearing Caps, Torque in sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs
Rod Bearing Caps, 45 Foot pounds (Final torque)

May 31, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

1993 dodge dakota 5.0 torque specs. for heads


105 Foot pounds (Final torque)

Torque sequence ------------ front | 7 3 1 5 9 | of | 8 4 2 6 10 | engine ------------ Final torque must be reached in 3 equal steps Recheck final torque in sequence

Mar 27, 2009 | 1993 Dodge Dakota

1 Answer

Need to know cylinder head bolt torque specs


Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

1991 jeep cherokee sport 4.0


 For your 1991 Jeep Cherokee 2WD 4.0L MFI :
  Foot pounds (Final torque) 

  Note:
  Torque sequence ------------------  
  front    | 12  8   4   1   5   9  13 | 
  of | | 
  engine | 11  7   3   2   6   10 14 | 
  ------------------  
Final torque must be reached in 3 equal steps  
  Step 1: torque all bolts (except bolt 11)  
  to 110 Ft/Lbs  
  Step 2: torque bolt 11 to 100 Ft/Lbs  
Recheck final torque in sequence  

Sep 30, 2008 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...