Question about Cars & Trucks

Open Question

My danfoss has service timer interval issues and shut down No heat, house family children dog freezing!!! HELP WHAT ARE THE OVERRIDE BUTTONS PLEASE SOS MAY DAY, PAN PAN HELP

What are the override buttons to push and hold to re-set?

Posted by on

  • 1 more comment 
  • Brad Brown Dec 27, 2016

    Hi Adrian Syn Bailey, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Model numbers

  • Adrian Syn Bailey
    Adrian Syn Bailey Dec 27, 2016

    Itis Dan fossil boiler thermostat. They are programmed by the techs to shut down on a set date programmed by the tech. There are a series of buttons to press to override the system and get the heat back on. It's seems it's a Danfoss super secret to override the system, they want £££ ransom to free the boiler.

  • Adrian Syn Bailey
    Adrian Syn Bailey Dec 27, 2016

    There are no visible model numbers

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75066 Answers

SOURCE: shift lock override button

Check your brake lights, if they are not working then the shift will not unlock.

Posted on Sep 18, 2008

  • 314 Answers

SOURCE: 1995 suburban 2500, battery problems, everything shuts down

With a test light, check for power at the starter main cable, have your helper try the starter. If the light goes out, check the connections. Plus all the ground cables, not just the one on the battery.
.
If the stays on, then replace the solenoid. Frankster016

Posted on Nov 24, 2008

  • 9 Answers

SOURCE: S E W buttons behind the gear shift

S Sport, E Economy, W Winter, the over drive

Posted on Dec 03, 2008

Rebgagnon
  • 382 Answers

SOURCE: I have a 2001 Subaru

I belive it is located on the 4" x 4" black box located by the steering column under dash.

Posted on Feb 02, 2009

  • 2 Answers

SOURCE: Auto Trans shifter stuck in Park

Apparently there's a latch that catches the shifter, its a yellow piece of plastic (1992 auto 240) I busted it off cause it was gonna make me late for work haha! silly me didnt bother to look in the manual till it was to late but its in there and you can disingage it by sticking your finger in the shifter housing and lifting it or something like that - check your manual !

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

South african parents are socialized to a family whereby the female stays at home while the male is at work


That's the way it is suppose to be. It's not unbalanced. It's called living within your means. Young people have to make a choice, before children. Do you want a big house, new cars??? Or do you want a family. If you want the big house, don't have kids. If you want a family, live within your means. Me and mine choose a family with a stay at home Mom.

Aug 06, 2016 | Cars & Trucks

Tip

Ford-Lincoln service light 1988-01


LS

2000-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the STATUS control to access the System Check mode. Press the RESET button to display OIL LIFE _% RESET FOR NEW. Press and hold the RESET button until OIL LIFE IS 100% is displayed.


Mark VIII


1993-97

When "CHANGE OIL SOON" or "OIL CHANGE REQUIRED" is displayed on the Message Center, turn the ignition on. Press and hold "OIL CHANGE RESET' or the "RESET" button until "OIL LIFE RESET TO 100%" is displayed on the Message Center.


Continental


1989-94

When "SERVICE" is illuminated, on the Message Center, press the "SYSTEM CHECK" button on the right of the display. Then press the "RESET" button. The "SERVICE" symbol and mileage will start to flash. Next, press the "SYSTEM CHECK" and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.


Continental


1988

When "SERVICE DUE" is illuminated on the Message Center, press the "CHECK OUT" button located below the display. Then press the "RESET" button. The display should now read "SERVICE DONE?" Next, press the "CHECK OUT" button and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.







on Dec 07, 2009 | Ford Lincoln Continental Cars & Trucks

1 Answer

How to do service reset vt commodore


To Reset the service reminder interval just follow these steps .
On the dash lefthand side there are 4 buttons these are set ,mode and an up and down arrow.
1.hold the 2 arrow buttons in together and turn the ignition on ,keep holding them and you will here a beep.
2.press the mode button once
3.then hold the 2 arrow buttons in again until it beeps.once this is done the service interval is reset..

Nov 09, 2013 | Cars & Trucks

1 Answer

Bed timer shuts off at 6 minutes


I think you would have to modify the timer for that. The 6min interval is to save the power on the batter so it doesn't run down....I'm not sure there is a way to change it with out some modifications. : (

Apr 04, 2012 | Cars & Trucks

1 Answer

What does it mean when the service vehichle soon light is on?


it means to service soon !!!! car ecu has a count down timer ,,, if it wasnt reset at last service it thinks a service is due ,make sure its reset every service so you can service at right intervals

Feb 14, 2012 | 2004 Buick Rendezvous

1 Answer

I have a code on the instument panel that says INO -2. the car won't start


Hi that is for the service reminder, this should not stop the car from starting though.

This is a service interval reminder.
You can hold down the two buttons on your guage cluster at the same time. to reset each Service "interval reminder".

Check the battery and the earth lead from the battery. get back to me with more info, does it turn over, any power etc etc
Regards
Dan


Dec 30, 2010 | Volkswagen Golf Cars & Trucks

2 Answers

BUYING A 2001 MERCEDES-BENZ S500 JUST NERVOUS


there have been issues with the engine wiring harness on top of the engine deteriorating, which can lead to poor performance or poor accelleration and idle quality. make certain you follow proper tune up and maintenance procedures and intervals as requested in owners manual. it is NOT inexpensive for parts or labor, BUT you get what you pay for when you have it serviced. try to continue going to the same dealer at which it has been maintained at, as they will have the service history on your vehicle, or, find a competent and qualified garage thru several references to prevent heartache and pain

May 05, 2009 | 2001 Mercedes-Benz S-Class

2 Answers

Water coming from bell housing.


If you are ABSOLUTLY POSITIVE this is where the Coolant is coming from the ONLY Sorce is Freeze plugs ,There are Usualy 2 Behind the Flywheel. Sorry For the BAD NEWS but this IS the only thing that can Leak Out of the Bell Housing, Transmissiou Must Come Out and Flywheel also, Once The Flywheel is OUT you will see the FREEZE PLUGS. Good Luck !! Please RATE ME !!!!!!!!!!!!

Mar 22, 2009 | 2007 Dodge Ram 2500 Mega Cab Laramie

2 Answers

In between the transmission and engine underneath removed dust co


unfortunatly, that is what it sounds like to me, unless its leaking and running down from somewhere else

Mar 10, 2009 | 1999 Honda Passport

1 Answer

Service engine light


Hello, Not being a Ford man myself but have reset many service interval lights, Try holding down either trip meter button or odometer reset whilst turning on the ignition. You may need to hold it down for 10/20 seconds. If unsure do what I've done in the past hold down all buttons on speedo face.
Good Luck and Happy New Year to you and your family!
Paul 'W'

Dec 31, 2008 | 2000 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...